Displacement-Based Design of Buildings with Torsion: Theory and Verification
Publication: Journal of Structural Engineering
Volume 140, Issue 6
Abstract
Direct displacement design (DDD) is a procedure that allows one to distribute the forces induced by an earthquake to the levels of a multistory building to ensure that the desired level of interstory drift is not exceeded. To date, DDD has only been applied to buildings that do not exhibit significant torsional response. This paper presents a methodology to perform displacement-based design (DBD) on multistory buildings with in-plane torsional irregularities, thereby generalizing DBD for buildings with torsion. The procedure includes decoupling the contribution of the deformation that results from translation and torsion by using an existing approximation technique. The approach is validated by using detailed finite-element models of asymmetric buildings; it is found to accurately reproduce the desired dynamic structural properties. Both linear and nonlinear (elastic-perfectly plastic) systems are demonstrated and the accuracy is verified. The method is shown to be very accurate for linear systems and slightly conservative for nonlinear systems.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This material is based upon work supported by the National Science Foundation under Grant No. CMMI-1314957 (NEES Research). Any opinions, findings, and conclusions or recommendations expressed in this material are those of the investigators and do not necessarily reflect the views of the National Science Foundation. The authors kindly acknowledge the Co-Investigators of the NEES-Soft Project including Weichiang Pang at Clemson University, Michael D. Symans at Rensselaer Polytechnic Institute, Mikhail Gershfeld at Cal Poly—Pomona, and Xiaoyun Shao at Western Michigan University. Thank you also to the senior personnel of the NEES-Soft project: David V. Rosowsky at Rensselaer Polytechnic Institute, Andre Filiatrault at University at Buffalo, Gary Mochizuki at Structural Solutions Inc., Shiling Pei at South Dakota State University, Douglas Rammer at the U.S. Forest Products Lab., David Mar at Tipping Mar, and Charles Chadwell at Cal Poly—SLO.
References
ASCE. (2010). “Minimum design loads for buildings and other structures.”, Reston, VA.
Borzi, B., Calvi, G. M., Elnashai, A. S., Faccioli, E., and Bommer, J. J. (2001). “Inelastic spectra for displacement-based seismic design.” Soil Dyn. Earthquake Eng., 21(1), 47–61.
Chopra, A. K., and Goel, R. K. (1999). “Capacity-demand-diagram methods for estimating seismic deformation of inelastic structures: SDF systems.”, Pacific Earthquake Engineering Research Center, Univ. of California, Berkeley, CA.
Clough, R. W., and Penzien, J. (1975). Dynamics of structures, McGraw-Hill, New York, 239–241, 557–562.
FEMA. (2009). “Quantification of building seismic performance factors.”, Washington, DC.
Filiatrault, A., and Folz, B. (2002). “Performance-based seismic design of wood framed buildings.” J. Struct. Eng., 39–47.
Gulkan, P., and Sozen, M. A. (1974). “In-elastic responses of reinforced concrete structures to earthquake motions.” Proc. ACI, 71(12), 605–610.
Kan, C. L., and Chopra, A. K. (1977). “Elastic earthquake analysis of torsionally coupled multistory buildings.” Earthquake Eng. Struct. Div., 5(4), 395–412.
Pang, W., and Rosowsky, D. (2008). “Performance-based seismic design of six-story woodframe structure.” Struct. Eng. Int., 18(2), 179–185.
Pang, W., Rosowsky, D. V., Pei, S., and van de Lindt, J. W. (2010). “Simplified direct displacement design of a six-story woodframe building and pre-test performance assessment.” J. Struct. Eng., 813–825.
Priestley, M. J. N. (1998). “Displacement-based approaches to rational limit states design of new structures.” Proc., 11th European Conf. on Earthquake Engineering, European Association of Earthquake Engineers, Istanbul, Turkey.
Priestley, M. J. N. (2002). “Direct displacement-based design of precast/prestressed concrete buildings.” PCI J., 47(6), 67–79.
Shepherd, R., and Donald, R. A. H. (1967). “Seismic response of torsionally unbalanced buildings.” J. Sound Vib., 6(1), 20–37.
van de Lindt, J. W., Pei, S., Pryor, S. E., Shimizu, H., and Isoda, H. (2010). “Experimental seismic response of a full-scale six-story light-frame wood building.” J. Struct. Eng., 1262–1272.
Wilkinson, J. H. (1965). “Perturbation theory.” Algebraic eigenvalue problem, Clarendon Press, Oxford, U.K., 62–71.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jul 18, 2012
Accepted: Jun 14, 2013
Published online: Jun 17, 2013
Published in print: Jun 1, 2014
Discussion open until: Aug 3, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.