Performance Evaluation of Portal Frame System in Low-Rise Light-Frame Wood Structures
Publication: Journal of Structural Engineering
Volume 140, Issue 3
Abstract
In this paper, results are presented from a testing program focused on evaluating the performance of portal frame systems. A total of nine full-scale portal frame assemblies with six different configurations were tested under monotonic and reversed cyclic loading. The portal frames were 3.66 m in length and 2.44 m in height, with a 406-mm wall segment at each end of the portal frame. From the experimental results, it was observed that the corner joint between the header and narrow braced wall segment governs the lateral load-carrying capacity and ultimate displacement of the portal frame. Installation of metal straps considerably increased the lateral load-carrying capacity of the portal frame assemblies. Straps placed directly on the lumber framing showed increased resistance compared to those installed on the oriented strand board. Portal frames with hold-downs had a greater lateral load-carrying capacity those without hold-downs. A comparison was made between portal frames and conventional braced walls used in low-rise light-frame wood buildings. The portal frames in general have lower initial stiffness than the braced walls. A portal frame with sheathing on one side only and no hold-down has an ultimate load-carrying capacity equivalent to a 2.44-m long braced wall with hold-down. A portal frame with hold-down can on average achieve a capacity similar to that of a 4.88-m long braced wall without hold-down.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers thank FPInnovations’ industry members; Natural Resources Canada (Canadian Forest Service); and the British Columbia, Alberta, Saskatchewan, Manitoba, Ontario, Québec, Nova Scotia, New Brunswick, Newfoundland and Labrador, and Yukon Territory governments for their financial support of the research reported in this paper. The writers acknowledge the contributions and effort of all members of the research team at FPInnovations, especially Mr. Paul Symons, Mr. Philip Eng, and Mr. Bill Deacon of FPInnovations Wood Products Division.
References
ASTM. (2009). “Standard test methods for cyclic (reversed) load test for shear resistance of vertical elements of the lateral force resisting systems for buildings.” ASTM E2126, West Conshohocken, PA.
Engineered Wood Association (APA). (2003). “Testing a portal frame design for use as bracing in fully sheathed structures.”, Tacoma, WA.
Engineered Wood Association (APA). (2004). “A portal frame design on raised wood floors for use as bracing in fully sheathed structures.”, Tacoma, WA.
Engineered Wood Association (APA). (2005). “Narrow wall bracing without hold-downs for use in a fully sheathed house.”, Tacoma, WA.
International Code Council (ICC). (2009). International residential code for one- and two-family dwellings, Washington, DC.
International Organization for Standardization (ISO). (2003). “Timber structures–Joints made with mechanical fasteners–Quasi-static reversed cyclic test method.” ISO 16670, Geneva.
National Research Council (NRC). (2010). National building code of Canada 2010, Ottawa.
Ni, C., and Mohammad, M. (2011). “Evaluation of lateral load prescriptive details of small wood buildings.” Rep. prepared for the Canadian Forest Service, Natural Resources Canada, Ottawa.
Ni, C., Shim, K. B., and Karacabeyli, E. (2010). “Performance of braced walls under various boundary conditions.” Proc., World Conf. on Timber Engineering, Engineered Wood Products Association, Madison, WI, 1–8.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 140 • Issue 3 • March 2014
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Oct 17, 2012
Accepted: May 20, 2013
Published online: May 22, 2013
Published in print: Mar 1, 2014
Discussion open until: Apr 19, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.