Behavior of Concrete and ECC Structures under Simulated Earthquake Motion
Publication: Journal of Structural Engineering
Volume 139, Issue 3
Abstract
The objective of the research presented in this paper is to investigate, experimentally, the effect of material- and section-level parameters on the structural response of concrete and engineered cementitious composite (ECC) buildings. In addition to testing of columns under monotonic, cyclic, and static-time history loading, hybrid simulation of structural frames is conducted. Stiffness, strength, ductility, and energy absorption capacity are selected as the response measures that represent the behavior of structures under seismic actions. The investigated variables are reinforcement ratios, ECC material properties, and axial load levels. The results are proposed as basic guidelines to determine the performance enhancement in terms of stiffness, strength, ductility, and energy absorption capacity, which could be achieved by replacing concrete with the high-performance material ECC.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was funded by the Mid-America Earthquake (MAE) Center and the George E. Brown, Jr. Network for Earthquake Engineering Simulation (NEES) facility in the Department of Civil and Environmental Engineering at the University of Illinois at Urbana–Champaign. The MAE Center is a graduated National Science Foundation (NSF) Engineering Research Center, which was funded under NSF Grant EEC-9701785. Funding from NEES was through the Illinois site grant from NSF, reference CMMI-0927178, and the NSF NEES-SG Seismic Simulation and Design of Bridge Columns under Combined Actions and Implications on System Response, reference CMMI-0530737. The ECC mixtures and columns were prepared and cast at Stanford University.
References
American Concrete Institute (ACI). (2008). “Building code requirements for structural concrete and commentary.” ACI 318-08, Farmington Hills, MI.
Billington, S. L., and Yoon, J. K. (2004). “Cyclic response of unbonded posttensioned precast columns with ductile fiber-reinforced concrete.” J. Bridge Eng., 9(4) 353–363.
Canbolat, B. A., Parra-Montesinos, G. J., and Wight, J. K. (2005). “Experimental study on seismic behavior of high-performance fiber-reinforced cement composite coupling beams.” ACI Struct. J., 102(1), 159–166.
Elnashai, A. S., Papanikolaou, V. K., and Lee, D. (2010). “ZEUS NL—A system for inelastic analysis of structures, user's manual,” Mid-America Earthquake (MAE) Center, Dept. of Civil and Environmental Engineering, Univ. of Illinois at Urbana–Champaign, Urbana, IL.
Fantilli, A. P., Mihashi, H., and Vallini, P. (2005). “Strain compatibility between HPFRCC and steel reinforcement.” Mater. Struct., 38(278), 495–503.
FEMA. (2007). “Interim testing protocols for determining the seismic performance characteristics of structural and nonstructural components.” FEMA 461, Washington, DC.
Fischer, G., and Li, V. C. (2002). “Effect of matrix ductility on deformation behavior of steel-reinforced ECC flexural members under reversed cyclic loading conditions.” ACI Struct. J., 99(6), 781–790.
Fischer, G., and Li, V. C. (2003). “Deformation behavior of fiber-reinforced polymer reinforced engineered cementitious composite (ECC) flexural members under reversed cyclic loading conditions.” ACI Struct. J., 100(1), 25–35.
Fukuyama, H., Matsuzaki, Y., Nakano, K., and Sato, Y. (1999). “Structural performance of beam elements with PVA-ECC.” High Performance Fiber Reinforced Cement Composites 3 (HPFRCC 3), H. W. Reinhardt and A. E. Naaman, eds., RILEM Publications SARL, Cachan, France, 531–542.
Fukuyama, H., Matsuzaki, Y., Sato, Y., Iso, M., and Suwada, H. (2000). “Structural performance of engineered cementitious composite elements.” Composite and Hybrid Structures, 6th ASCCS Int. Conf. on Steel-Concrete Composite Structures, Dept. of Civil Engineering, Univ. of Southern California, Los Angeles, 969–976.
Fukuyama, H., and Suwada, H. (2003). “Experimental response of HPFRCC dampers for structural control.” J. Adv. Concr. Technol., 1(3), 317–326.
Gencturk, B., and Elnashai, A. S. (2011). “Multi-objective optimal seismic design of buildings using advanced engineering materials,” Rep. 11–01, Mid-America Earthquake Center, Univ. of Illinois at Urbana–Champaign. Urbana, IL.
Gencturk, B., and Elnashai, A. (2012). “Numerical modeling and analysis of ECC structures.” Mater. Struct.,.
Holub, C. (2005). “Similitude considerations for small scale distributed hybrid simulation of reinforced concrete structures.” M.S. thesis, Dept. of Civil and Environmental Engineering, Univ. of Illinois at Urbana–Champaign, Urbana, IL.
Kanda, T., Watanabe, S., and Li, V. C. (1998). “Application of pseudo strain hardening cementitious composites to shear resistant structural elements.” Fracture Mechanics of Concrete Structures, AEDIFICATIO, Freiburg, Germany, 1477–1490.
Li, V. C. (1992a). “Performance driven design of fiber reinforced cementitious composites.” 4th Int. Symp. on Fiber Reinforced Concrete, R. N. Swamy, ed., Sheffield, U.K., 12–30.
Li, V. C. (1992b). “Postcrack scaling relations for fiber reinforced cementitious composites.” J. Mater. Civ. Eng., 4(1), 41–57.
Li, V. C., and Leung, C. K. Y. (1992). “Steady-state and multiple cracking of short random fiber composites.” J. Eng. Mech., 118(11), 2246–2264.
Li, V. C., and Stang, H. (2004). “Elevating FRC material ductility to infrastructure durability.” 6th RILEM Symp. on Fibre-Reinforced Concretes (FRC)–BEFIB, Varenna, Italy, 171–186.
Li, V. C., Wang, S., and Wu, C. (2001). “Tensile strain-hardening behavior of polyvinyl alcohol engineered cementitious composite (PVA-ECC).” ACI Mater. J., 98(6), 483–492.
Li, V. C., and Wu, H. C. (1992). “Conditions for pseudo strain-hardening in fiber reinforced brittle matrix composites.” J. Appl. Mech. Rev., 45(8), 390–398.
Park, R. (1988). “Ductility evaluation from laboratory and analytical testing.” 9th World Conf. on Earthquake Engineering, Vol. VIII, International Association of Earthquake Engineering (IAEE), Tokyo, 605–616.
Parra-Montesinos, G. J., and Chompreda, P. (2007). “Deformation capacity and shear strength of fiber-reinforced cement composite flexural members subjected to displacement reversals.” J. Struct. Eng., 133(3), 421–431.
Parra-Montesinos, G. J., Peterfreund, S. W., and Chao, S. H. (2005). “Highly damage-tolerant beam-column joints through use of high-performance fiber-reinforced cement composites.” ACI Struct. J., 102(3), 487–495.
Yun, H. D., Kim, S. W., Jeon, E., Park, W. S., and Lee, Y. T. (2008). “Effects of fibre-reinforced cement composites' ductility on the seismic performance of short coupling beams.” Mag. Concr. Res., 60(3), 223–233.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Feb 4, 2011
Accepted: Jun 5, 2012
Published online: Aug 10, 2012
Published in print: Mar 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.