Experiments on Cold-Formed Steel C-Section Joists with Unstiffened Web Holes
Publication: Journal of Structural Engineering
Volume 139, Issue 5
Abstract
Experiments were conducted on cold-formed steel C-section joists with rectangular unstiffened web holes. The presence of holes decreased joist capacity and amplified distortional buckling deformation. Distortional buckling was accompanied by unstiffened strip buckling of the compressed web. When hole depth approached the web depth, sudden buckling of the compressed flange and web above the hole was observed. Critical elastic buckling moments for local, distortional, and global buckling were calculated for each specimen including the influence of holes with recently introduced engineering expressions and finite strip analysis. Forthcoming direct strength method equations for cold-formed steel joists with holes were demonstrated to be viable predictors of flexural capacity for the specimens considered in the experimental program.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank ClarkDietrich Building Systems for donating the joist specimens and the reviewers for helpful comments.
References
ABAQUS Standard version 6.9-2 [Computer software]. Providence, RI, Simulia.
American Iron and Steel Institute (AISI). (2007). “North American specification for the design of cold-formed steel structural members.” AISI-S100, Washington, DC.
ASTM. (2009). “Standard test methods for tension testing of metallic materials.” E8-09/E8M- 09, West Conshohocken, PA.
Grey, C. N., and Moen, C. D. (2011). “Elastic buckling simplified methods for cold-formed steel columns and beams with edge-stiffened holes.” 2011 Annual Stability Conf., Structural Stability Research Council, Pittsburgh.
Hancock, G. (1997). “Design for distortional buckling of flexural members.” Thin-walled Struct., 27(1), 3–12.
Moen, C. D. (2008). “Direct strength design for cold-formed steel members with perforations.” Ph.D. thesis, Johns Hopkins Univ., Baltimore.
Moen, C. D., and Schafer, B. W. (2009a). “Elastic buckling of cold-formed steel columns and beams with holes.” Eng. Structures, 31(12), 2812–2824.
Moen, C. D., and Schafer, B. W. (2009b). “Elastic buckling of thin plates with holes in compression or bending.” Thin-walled Struct., 47(12), 1597–1607.
Schafer, B. W. (2002). “Local, distortional, and Euler buckling of thin-walled columns.” J. Struct. Eng., 128(3), 289–299.
Schafer, B. W., and Ádány, S. (2006). “Buckling analysis of cold-formed steel members using CUFSM: Conventional and constrained finite strip methods.” 18th Int. Specialty Conf. on Cold-Formed Steel Structures, Missouri Univ. of Science and Technology, Rolla, MO.
Schafer, B. W., Li, Z., and Moen, C. D. (2010). “Computational modeling of cold-formed steel.” Thin-walled Struct., 48(10–11), 752–762.
Schafer, B. W., and Peköz, T. (1999). “Laterally braced cold-formed steel flexural members with edge stiffened flanges.” J. Struct. Eng., 125(2), 118–127.
Schudlich, A. (2011). “Experiments on cold-formed steel joists with unstiffened holes.” Structural Engineering and Materials Report CE/VPI-ST-11/05, Virginia Tech, Blacksburg, VA.
Steel Stud Manufacturers Association (SSMA). (2010). Product technical information, Steel Stud Manufacturers Association, Chicago.
von der Heyden, A. (2011). “Elastic buckling of cold-formed steel joists with unstiffened holes.” Structural Engineering and Materials Report CE/VPI-ST-11/06, Virginia Tech, Blacksburg, VA.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Oct 9, 2011
Accepted: May 16, 2012
Published online: Jun 2, 2012
Published in print: May 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.