Nonlinear Finite Element Analysis for Cyclic Behavior of Thin-Walled Stiffened Rectangular Steel Columns with In-Filled Concrete
Publication: Journal of Structural Engineering
Volume 138, Issue 5
Abstract
The strength, ductility, and energy dissipation capacity of thin-walled, stiffened rectangular concrete-filled steel columns (thin-walled stiffened RCFT columns) subjected to cyclic loads are significantly upgraded by filling with concrete the internal hollow space of rectangular steel tube with longitudinal stiffeners and diaphragms. However, because of the accumulation of plastic strains and the high tensile stress concentration in thin-walled steel columns, metal fracture sometimes occurs before the columns develop their high strength and ductility. To elucidate the behavior of CFT columns and prevent the premature failure resulting from metal fracture, it is necessary to develop some geometrically and materially nonlinear finite element (FE) models that can accurately take into account important factors such as cyclic local buckling, stress and strain concentrations in the steel tube, confinement of the in-filled concrete, and interface action between steel tube and in-filled concrete. In this paper an accurate and yet, numerically stable FE model, which fully includes these important factors, is proposed. The accuracy of the proposed model is confirmed by comparison with the existing cyclic-loading tests on thin-walled stiffened RCFT columns. By utilizing the numerical results obtained by the proposed FE model, the upgrading mechanism and metal fracture of thin-walled stiffened RCFT columns are discussed in detail.
Get full access to this article
View all available purchase options and get full access to this article.
References
ABAQUS/Standard 6.6 User’s Manual. (2006). Hibbit, Karlson & Sorensen, Paris.
American Concrete Institute (ACI). (1999). “Building code requirement for structural concrete and commentary.” ACI318-99, Detroit.
American Concrete Institute (ACI). (2001). “ACI Code issues-coefficient of friction: Concrete to concrete.” 〈http://www.eng-tips.com/viewthread.cfm?qid=11539〉 (Sep. 2001).
Balan, T. A., Spacone, E., and Kwon, M. (2001). “A 3D hypoelastic model for cyclic analysis of concrete structures.”Eng. Struct., 23(4), 333–342.
Bridge, R. Q., O’Shea, M. D., Gardner, A. P., Grigson, R., and Tyrrell, J. (1995). “Local buckling of square thin-walled steel tubes with concrete infill.” Proc., Int. Conf. on Struct. Stability and Design, A. A. Balkema, Rotterdam, Netherlands, 307–314.
Chen, F. W. (1982). Plasticity in reinforced concrete, McGraw-Hill, NewYork.
Ge, H., and Usami, T. (1996). “Cyclic test of concrete-filled steel box columns.” J. Struct. Eng.JSENDH, 122(10), 1169–1177.
Goto, Y., Ghosh, P. K., and Kawanishi, N. (2009). “FEM analysis for hysteretic behavior of CFT bridge piers considering interaction between steel tube and in-filled concrete.” J. Struct. Mech. Earthquake Eng., 65(2), 487–504 (in Japanese).
Goto, Y., Ghosh, P. K., and Kawanishi, N. (2010). “Nonlinear finite-element analysis for hysteretic behavior of thin-walled circular columns with in-filled concrete.” J. Struct. Eng.JSENDH, 136(11), 1413–1422.
Goto, Y., Jiang, K., and Obata, M. (2006). “Stability and ductility of thin-walled circular steel columns under cyclic bidirectional loading.” J. Struct. Eng., 132(10), 1621–1631.
Goto, Y., Jiang, K., and Obata, M. (2007). “Hysteretic behavior of thin-walled stiffened rectangular steel columns under cyclic bi-directional loading.” J. Struct. Mech. Earthquake Eng., 63(1), 122–141 (in Japanese).
Goto, Y, Wang, Q. Y., and Obata, M. (1998). “FEM analysis for hysteretic behavior of thin-walled columns.” J. Struct. Eng., 124(11), 1290–1301.
Hajjar, J. F., Molodan, A., and Schiller, P. H. (1998). “A distributed plasticity model for cyclic analysis of concrete-filled steel tube beam columns and composite frames.” Eng. Struct., 20, (4–6), 398–412.ENSTDF
Ishikawa, N., Kobayashi, Y., Kurihara, M., Osawa, K., and Toyoda, M. (1999). “Ductile crack initiation behavior of structural steel under cyclic loading.” Tetsu-to-Hagane, 85(1) 71–77 (in Japanese).
Japan Society of Civil Engineers (JSCE). (2002). “Standard specifications for concrete structures-2002.” Seismic performance verification, Tokyo (in Japanese).
Japan Society of Civil Engineers (JSCE) Committee on Steel Structure. (1996). Seismic design guideline proposal and new technology for steel bridges, Tokyo (in Japanese).
Johansson, M., and Gylltoft, K. (2001). “Structural behavior of slender circular steel-concrete composite columns under various means of load application.” Steel Compos. Struct., 1(4), 393–410.
Lee, J., and Fenves, G. L. (1998). “Plastic-Damage Model for Cyclic Loading of Concrete Structures” J. Eng. Mech.JENMDT, 124(8), 892–900.
Liu, J., Zhou, X., and Zhang, S. (2008). “Seismic behavior of square CFT beam-columns under biaxial bending moment.” J. Constr. Steel Res., 64, 1473–1482.JCSRDL
Lue, D. M., Liu, J., and Yen, T. (2007). “Experimental study on rectangular CFT columns with high-strength concrete.” J. Constr. Steel Res., 63, 37–44.JCSRDL
Matsumura, T., and Mizuno, E. (2007). “3-D FEM analyses on internal state inside the concrete filled steel tubular columns subjected to flexural deformation under axial loading.” J. Struct. Eng., 53A, 75–83 (in Japanese).
Public Work Research Institute. (1997-2000). Report of cooperative research on limit state seismic design for bridge piers, I-VIII and summary. Ibaraki, Japan (in Japanese).
Sakino, K., Nakahara, H., Morino, S., and Nishiyama, I. (2004). “Behavior of centrally loaded concrete-filled steel-tube short columns.” J. Struct. Eng., 130(2), 180–188.
Shen, X., Shen, G., and Zhou, L. (2005). “Parameter identification of a triaxiality-dependent plastic damage model for concrete.” Proc., 18th Int. Conf. on Structural Mechanics in Reactor Technology (CD-ROM), (SMiRT 18-C08-1) Beijing, China, 2151–2157.
Susantha, K. A. S., Ge, H., and Usami, T. (2002). “Cyclic analysis and capacity prediction of concrete-filled steel box columns.” Earthquake Eng. Struct. Dyn.IJEEBG, 31(2), 195–216.
Tort, C., and Hajjar, J. F. (2010). “Mixed finite-element modeling of rectangular concrete-filled steel tube members and frames under static and dynamic loads.” J. Struct. Eng., 136(6), 654–664.
Uy, B. (1998). “Local and post-local buckling of concrete filled steel welded box columns.” J. Constr. Steel Res., 47(1–2), 47–72.JCSRDL
Varma, H. A., Ricles, J. M., Sause, R., and Lu, L-W. (2002). “Seismic behavior and modeling of high-strength composite concrete-filled steel tube (CFT) beam-columns.” J. Constr. Steel Res., 58(5-8), 725–758.JCSRDL
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Nov 29, 2010
Accepted: Sep 22, 2011
Published online: Sep 26, 2011
Published in print: May 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.