Vector Form Intrinsic Finite-Element Analysis of Steel Frames with Semirigid Joints
Publication: Journal of Structural Engineering
Volume 138, Issue 3
Abstract
This study uses the vector form intrinsic finite-element (VFIFE) method to investigate the inelastic large deflection behavior of steel frames with semirigid joints. The structural connections are modeled by the two-node, multidegree-of-freedom spring system and dummy element with stiffness but without actual mass and length. The proposed model is first verified by comparing its numerical solutions with the published results. The various structural behaviors, such as the bifurcation instability, the snap-through buckling, and the inelastic structural response with beam element fracture, are then fully studied. The numerical results show that the semirigid joint reduces the global stiffness of structure. Therefore, as expected, the simplified rigid joint will over estimate the loading capacity of the structure. The fracture analysis of the multi span frame shows that when the beam fractures, the structure elements would absorb more energy and thus, the reduction ratio of loading capacity after beam fracture is smaller than that of single-span frame. In addition, the loss of loading capacity is more obvious when the beams fracture in the lower story.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study is supported by the National Science Council of the Republic of China under grant UNSPECIFIEDNSC98-2221-E-006-135-MY3.
References
Abdalla, K. M., and Chen, W. F. (1995). “Expanded database of semirigid steel connections.” Comput. Struct., 56(4), 553–564.
Brown, N. D., and Anderson, D. (2001). “Structural properties of composite major axis end plate connections.” J. Constr. Steel Res., 57(3), 327–349.
Chan, S. L., and Ho, G. W. M. (1994). “Nonlinear vibration analysis of steel frames with semirigid connections.” J. Struct. Eng., 120(4), 1075–1087.
Chui, P. P. T., and Chan, S. L. (1996). “Transient response of moment-resistant steel frames with flexible and hysteretic joints.” J. Constr. Steel Res., 39(3), 221–243.
Del Savio, A. A., Andrade, S. A. L., Vellasco, P. C. G. S., and Martha, L. F. (2004). “A nonlinear system for semirigid steel portal frame analysis.” Proc., 7th Int. Conf. on Computational Structures Technology, Vol. 1, Tecnologia em Computação Gráfica, Rio de Janeiro, Brazil, 1–12.
Del Savio, A. A., Vellasco, P. C. G. S., Andrade, S. A. L., and Martha, L. F. (2005). “Structural evaluation on semirigid steel portal frames.” Proc., Eurosteel 2005, 4th European Conf. on Steel and Composite Structures, Vol. A, Tecnologia em Computação Gráfica, Rio de Janeiro, Brazil, 4.49–4.56.
Dissanayake, U. I., Burgess, I. W., and Davison, J. B. (2000). “Modelling of plane composite frames in unpropped construction.” Eng. Struct., 22(4), 287–303.
Eurocode 3. (1998). “Design of steel structures—Joints in building frames.” ENV-1993-1-1:1992/A2, Annex J, CEN, European Committee for Standardization, Brussels, Belgium.
Green, T. P., Leon, R. T., and Rassati, G. A. (2004). “Bidirectional tests on partially restrained, composite beam-to-column connections.” J. Struct. Eng., 130(2), 320–327.
Huber, G., and Tschemmernegg, F. (1998). “Modelling of beam-to-column joints.” J. Constr. Steel Res., 45(2), 199–216.
Keulen, D. C., Nethercot, D. A., Snijder, H. H., and Bakker, M. C. M. (2003). “Frame analysis incorporating semirigid joint action: Applicability of the half initial secant stiffnes approach.” J. Constr. Steel Res., 59, 1083–1100.
Li, T. Q., Choo, B. S., and Nethercot, D. A. (1995). “Connection element method for the analysis of semirigid frames.” J. Constr. Steel Res., 32, 143–171.
Lien, K. H., Chiou, Y. J., Wang, R. Z., and Hsiao, P. A. (2009). “Nonlinear behavior of steel structures considering the cooling phase of a fire.” J. Constr. Steel Res., 65, 1776–1786.
Lien, K. H., Chiou, Y. J., Wang, R. Z., and Hsiao, P. A. (2010). “Vector form intrinsic finite element analysis of nonlinear behavior of steel structures exposed to fire.” Eng. Struct., 32, 80–92.
Lui, E. M., and Chen, W. F. (1988). “Behavior of braced and unbraced semirigid frames.” Int. J. Solids Struct., 24(9), 893–913.
Mageirou, G. E., and Gantes, C. J. (2006). “Buckling strength of multi-story sway, non-sway and partially-sway frames with semirigid connections.” J. Constr. Steel Res., 62, 893–905.
Mondkar, D. P., and Powell, G. H. (1977). “Finite element analysis of nonlinear static and dynamic response.” Int. J. Numer. Methods Eng., 11, 499–520.
Raftoyiannis, I. G. (2005). “The effect of semirigid joints and an elastic bracing system on the buckling load of simple rectangular steel frames.” J. Constr. Steel Res., 61, 1205–1225.
Rodrigues, F. C., Saldanha, A. C., and Pfeil, M. S. (1998). “nonlinear analysis of steel plane frames with semirigid connections.” J. Constr. Steel Res., 46, 94–97.
Shih, C., Wang, Y. K., and Ting, E. C. (2004). “Fundamentals of a vector form intrinsic fnite element: Part III. Convected material frame and examples.” J. Mech., 20(2), 133–143.
Sophianopoulos, D. S. (2003). “The effect of joint flexibility on the free elastic vibration characteristics of steel plane frames.” J. Constr. Steel Res., 59, 995–1008.
Tan, K. H., Ting, S. K., and Huang, Z. F. (2002). “Visco-elasto-plastic analysis of steel frames in fire.” J. Struct. Eng., 128(1), 105–114.
Ting, E. C., Shih, C., and Wang, Y. K. (2004a). “Fundamentals of a vector form intrinsic fnite element: Part I. Basic procedre and a plane frame element.” J. Mech., 20(2), 113–122.
Ting, E. C., Shih, C., and Wang, Y. K. (2004b). “Fundamentals of a vector form intrinsic fnite element: Part II. Plane solid elements.” J. Mech., 20(2), 123–132.
Wang, Y. K. (1996). “A general curved element for very flexible beam.” Ph.D. thesis, Purdue Univ., Richmond, IN.
Williams, F. W. (1964). “An approach to the nonlinear beaviour of the members of a rigid jointed plane framewok with finite deflections.” Q. J. Mech. Appl. Math., 17, 451–469.
Yang, Y. B., and Chiou, H. T. (1987). “Analysis with beam elements.” J. Eng. Mech., 113, 1404–1419.
Yang, T. Y., and Saigal, S. (1984). “A simple element for static and dynamic response of beams with material and geometric nonlinearities.” Int. J. Numer. Methods Eng., 20, 851–867.
Yau, C. Y., and Chan, S. L. (1994). “Inelastic and stability analysis of flexibly connected steel frames by springs-in-series model.” J. Struct. Eng., 120(10), 2803–2819.
Zhou, Z. H., and Chan, S. L. (1995). “Self-equilibrating element for second-order analysis of semirigid jointed frames.” J. Eng. Mech., 121(8), 896–902.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 138 • Issue 3 • March 2012
Pages: 327 - 336
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Jul 22, 2009
Accepted: Aug 3, 2011
Published online: Aug 5, 2011
Published in print: Mar 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.