Global Interventions for Seismic Upgrading of Substandard RC Buildings
Publication: Journal of Structural Engineering
Volume 138, Issue 3
Abstract
A methodology is developed in this paper for the design and proportioning of interventions for seismic upgrading of substandard reinforced-concrete (RC) buildings. The retrofit approach is presented in the form of a simple design tool that aims toward both demand reduction and enhancement of force and deformation supply through controlled modification of stiffness along the height of the building. This objective is achieved by engineering the translational mode-shape of the structure, so as to optimize the distribution of interstory drift. Results from the proposed approach are summarized in a spectrum format in which demand, expressed in terms of interstory drift, is related to stiffness. Design charts, which relate the characteristics of commonly used global intervention procedures to influence drift demands, are developed to facilitate the retrofit design. The intervention procedures considered in this paper are reinforced-concrete jacketing, the addition of reinforced-concrete walls, and the addition of masonry infills. The proposed methodology is also amenable to adaptation to other strengthening methods, such as the addition of cross-bracing.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aschheim, M. A., and Black, E. F. (2000). “Yield point spectra for seismic design and rehabilitation.” EERI Earthquake Spectra, 16(2), 317–336.
Clough, R. W., and Penzien, J. (1993). Dynamics of Structures, 2nd Ed., McGraw-Hill International Editions, New York, NY, 738.
Deutsches Institut für Normung (DIN). (1972). “Beton un stahlbetonbau: bemessung und ausführung.” DIN 1045, Berlin.
Elnashai, A. S., Papanikolaou, V., and Lee, D.-H. (2002). “ZEUS-NL user manual.” Mid-America Earthquake Center Report, Univ. of IL at Urbana-Champaign, 〈http://mae.cee.illinois.edu/software_and_tools/zeus_nl.html〉 (Feb. 2012).
Eurocode 8. (2004). Design of structures for earthquake resistance—Part 1: General rules, seismic actions and rules for buildings, EN1998-1-2004:E, European Committee for Standardization (CEN), Brussels, Belgium.
Eurocode 8. (2005). Design of structures for earthquake resistance. Part 3: Assessment and retrofitting of buildings, EN 1998-3:2005(E), European Committee for Standardization (CEN), Brussels, Belgium.
Gülkan, P., and Sozen, M. A. (1999). “Procedure for determining seismic vulnerability of building structures.” ACI Struct. J., 96(3), 336–342.
KANEPE. (2012). “Interventions code.” Final draft, Earthquake Planning and Protection Organization (EPPO), Athens, Greece, (in Greek).
Pardalopoulos, P., and Pantazopoulou, S. J. (2011). “Spatial component analysis of 3-D displacement and story drift in RC buildings under seismic loads.” Proc., Computational Methods in Earthquake Engineering, M. Papadrakakis et al., ed., Springer, New York.
Paulay, T., and Priestley, M. J. N. (1992). Seismic design of reinforced concrete and masonry buildings, Wiley, New York, 744.
Pinto, A., Verzeletti, G., Molina, J., Varum, H., Pinho, R., and Coehlo, E. (2002). “Pseudo-dynamic tests on non-seismic resisting RC frames (bare and selective retrofit frames).” EUR Report 20244EN, Joint Research Institute, Ispra, Italy.
Thermou, G. E., Pantazopoulou, S. J., and Elnashai, A. S. (2009). “Design and assessment models and spectra for repaired reinforced concrete structures.” Mid-America Earthquake Center Report, CD release 09-01.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Feb 22, 2011
Accepted: Aug 2, 2011
Published online: Aug 5, 2011
Published in print: Mar 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.