Design of Retaining Walls Using Big Bang–Big Crunch Optimization
Publication: Journal of Structural Engineering
Volume 138, Issue 3
Abstract
A procedure is developed for designing low-cost or low-weight cantilever reinforced concrete retaining walls, with base shear keys, using big bang–big crunch (BB-BC) optimization. The objective of the optimization is to minimize the total cost or total weight per unit length of the retaining structure subjected to constraints on the basis of stability, bending moment, and shear force capacities and the requirements of the American Concrete Institute (ACI 318-05). An iterative population-based heuristic search method, BB-BC optimization has a numerically simple algorithm with relatively few control parameters as compared with other evolutionary methods. Low-cost and low-weight designs for two retaining walls are presented. In addition, results are presented on the effects of surcharge load, backfill slope, and internal friction angle of the retained soil on the values of low-cost and low-weight designs with and without a base shear key.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ahmadi-Nedushan, B., and Varaee, H. (2009). “Optimal design of reinforced concrete retaining walls using a swarm intelligence technique.” Proc., 1st Int. Conf. on Soft Computing Technology in Civil, Structural and Environmental Engineering, Civil-Comp Press, Stirlingshire, U.K.
Alshawi, F. A. N., Mohammed, A. I., and Farid, B. J. (1988). “Optimum design of tied-back retaining walls.” Struct. Eng. (London), 66(6), 97–105.
American Concrete Institute. (1989). Building code requirements for structural concrete and commentary (ACI 318-89), Detroit.
American Concrete Institute. (2005). Building code requirements for structural concrete and commentary (ACI 318-05), Detroit.
Babu, G. L. S., and Basha, B. M. (2008). “Optimal design of cantilever retaining walls using target reliability approach.” Int. J. Geomech., 8(4), 240–252.
Bhatti, M. A. (2006). “Retaining wall design optimization with MS excel solver.” Proc., 17th Analysis and Computation Specialty Conf., ASCE, Reston, VA.
Camp, C. (2007). “Design of space trusses using big bang–big crunch optimization.” J. Struct. Eng., 133(7), 999–1007.
Camp, C. V., and Bichon, B. J. (2004). “Design of space trusses using ant colony optimization.” J. Struct. Eng., 130(5), 741–751.
Camp, C. V., Pezeshk, S., and Hansson, H. (2003). “Flexural design of reinforced concrete frames using a genetic algorithm.” J. Struct. Eng., 129(1), 105–115.
Ceranic, B., Fryer, C., and Baines, R. W. (2001). “An application of simulated annealing to the optimum design of reinforced concrete retaining structures.” Comput. Struct., 79(17), 1569–1581.
Chau, K. W., and Albermani, F. (2003). “Knowledge-based system on optimum design of liquid retaining structures with genetic algorithms.” J. Struct. Eng., 129(10), 1312–1321.
Coello Coello, C., Christiansen, A. D., and Santos, F. (1997). “A simple genetic algorithm for the design of reinforced concrete beams.” Eng. Comput., 13(4), 185–196.
Das, B. M. (1994). Principles of geotechnical engineering, PWS Publishing, Boston.
Erol, O. K., and Eksin, I. (2006). “A new optimization method: Big bang-big crunch.” Adv. Eng. Software, 37(2), 106–111.
Fang, H. Y., Atsuta, T., and Chen, W. F. (1980). “Optimum design of retaining walls on sloping hillside.” Proc., 6th Southeast Asian Conf. on Soil Engineering, Southeast Asian Society of Soil Engineering (SEASSE), 391–406.
Galton, F. (1907). “Vox populi.” Nature, 75(1949), 450–451.
Govindaraj, V., and Ramasamy, J. V. (2005). “Optimum detailed design of reinforced concrete continuous beams using genetic algorithms.” Comput. Struct., 84(1–2), 34–48.
Kaveh, A., and Abadi, A. S. M. (2010). “Harmony search based algorithm for the optimum cost design of reinforced concrete cantilever retaining walls.” Int. J. Civ. Eng., 9(1), 1–8.
Kaveh, A., and Talatahari, S. (2009). “Size optimization of space trusses using Big bang-big crunch algorithm.” Comput. Struct., 87(17–18), 1129–1140.
Kaveh, A., and Talatahari, S. (2010). “A discrete big bang-big crunch algorithm for optimal design of skeletal structures.” Asian J. Civ. Eng. (Build. Hous.), 11(1), 103–122.
Keskar, A. V., and Adidam, S. R. (1989). “Minimum cost design of a cantilever retaining wall.” Indian Concr. J., 63(8), 401–405.
Kwak, H. G., and Kim, J. (2008). “Optimum design of reinforced concrete plane frames based on predetermined section database.” Comput. Aided Des., 40(3), 396–408.
Kwak, H. G., and Kim, J. (2009). “An integrated genetic algorithm complemented with direct search for optimum design of RC frames.” Comput. Aided Des., 41(7), 490–500.
Lee, C. L., and Ahn, J. (2003). “Flexural design of reinforced concrete frames by genetic algorithm.” J. Struct. Eng., 129(6), 762–774.
Lepš, M., and Šejnoha, M. (2003). “New approach to optimization of reinforced concrete beams.” Comput. Struct., 81(18–19), 1957–1966.
Low, B. K., Teh, C. I., and Tang, W. H. (2001). “Efficient reliability-based design using spreadsheet optimization.” Proc. 8th Int. Conf. on Structural Safety and Reliability, ICOSSAR 2001, A.A. Balkema Publishers, Rotterdam, The Netherlands.
Paya, I., Yepes, V., González-Vidosa, F., and Hospitaler, A. (2008). “Multiobjective optimization of concrete building frames by simulated annealing.” Comput. Aided Civ. Infrastruct. Eng., 23(8), 596–610.
Paya-Zaforteza, I., Yepes, V., Hospitaler, A., and González-Vidosa, F. (2009). “-optimization of reinforced concrete frames by simulated annealing.” Eng. Struct., 31(7), 1501–1508.
Perea, C., Alcala, J., Yepes, V., González-Vidosa, F., and Hospitaler, A. (2008). “Design of reinforced concrete bridge frames by heuristic optimization.” Adv. Eng. Software, 39(8), 676–688.
Rafiqa, M. Y., and Southcombea, C. (1998). “Genetic algorithms in optimal design and detailing of reinforced concrete biaxial columns supported by a declarative approach for capacity checking.” Comput. Struct., 69(4), 443–457.
Rajeev, S., and Krishnamoorthy, C. S. (1998). “Genetic algorithms-based methodology for design optimization of reinforced concrete frames.” Comput. Aided Civ. Infrastruct. Eng., 13(1), 63–74.
Rhomberg, E. J., and Street, W. M. (1981). “Optimal design of retaining walls.” J. Struct. Div., 107(5), 992–1002.
Sahab, M. G., Ashour, A. F., and Toropov, V. V. (2004). “Cost optimisation of reinforced concrete flat slab buildings.” Eng. Struct., 27(3), 313–322.
Saribaş, A., and Erbatur, F. (1996). “Optimization and sensitivity of retaining structures.” J. Geotech. Eng., 122(8), 649–656.
Yepes, V., Alcala, J., Perea, C., and González-Vidosa, F. (2008). “A parametric study of optimum earth-retaining walls by simulated annealing.” Eng. Struct., 30(3), 821–830.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Oct 19, 2010
Accepted: Jun 15, 2011
Published online: Jun 17, 2011
Published in print: Mar 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.