Reliability-Based Evaluation of U.S. Design Provisions for Composite Steel Deck in Construction Stage
Publication: Journal of Structural Engineering
Volume 138, Issue 3
Abstract
This paper presents a reliability-based evaluation of the American National Standards Institute/Steel Deck Institute (ANSI/SDI) C1.0 and Structural Engineering Institute/American Society of Civil Engineers (SEI/ASCE) 37 design provisions for composite steel decks in the construction stage. Reliability of the allowable stress design (ASD) and load and resistance factor design (LRFD) methods at the strength and deflection limit states was evaluated in terms of reliability indices employing the first-order reliability method. A large number of composite slab configurations, which cover the range of slab parameters typically used in the U.S. construction practice, were investigated. Obtained results demonstrate that the current design provisions for steel decks in the construction stage are overconservative. Modifications of the ANSI/SDI C1.0 construction load requirements are proposed. The modified load requirements result in longer maximum unshored construction spans and acceptable reliability. Safety of the deck designed according to the modified load requirements is more uniform across the typical design parameters when compared with the current design provisions.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Iron and Steel Institute (AISI). (2007). “North American specification for the design of cold-formed steel structural members.” AISI S100-07, Washington, D.C.
American National Standard Institute (ANSI) and American Society of Civil Engineers (ASCE). (1992). “Standard for structural design of composite slabs.” ANSI/ASCE 3-91, NY.
American National Standard Institute (ANSI) and Steel Deck Institute (SDI). (2009). “Standard for composite steel floor deck.” ANSI/SDI C1.0-2006, Fox River Grove, IL.
Ayoub, H., and Karshenas, S. (1994). “Survey results for construction live loads on newly poured slabs.” J. Struct. Eng., 120(5), 1543–1562.
Ayyub, B. M., and Haldar, A. (1984). “Practical structural reliability techniques.” J. Struct. Eng., 110(8), 1707–1724.
Bleustein, J. L., and Gjelsvik, A. (1970). “Rational design of light gage beams.” J. Struct. Div., 96(7), 1535–1541.
Ellingwood, B. R., Galambos, T. V., MacGregor, J. G., and Cornell, C. A. (1980). “Development of a probability based load criteria for American national standard A58: Building code requirements for minimum design loads in buildings and other structures.” NBS Special Publication 577, National Bureau of Standards, U.S. Dept. of Commerce, Washington, D.C.
Ditlevsen, O., and Madsen, H. O. (1996). Structural reliability methods, Wiley, NY.
Epaarachchi, D. C., Stewart, M. G., and Rosowsky, D. V. (2002). “Structural reliability of multistory buildings during construction.” J. Struct. Eng., 128(2), 205–213.
Haldar, A. (2005). “Reliability-based structural design.” Handbook of structural engineering, 2nd Ed., W. F. Chen and E. M. Lui, eds., CRC Press, Boca Raton, FL, 12–1, 12–26.
Hsiao, L. E., Yu, W. W., and Galambos, T. V. (1990). “AISI LRFD method for cold-formed steel structural members.” J. Struct. Eng., 116(2), 500–517.
Karshenas, S., and Ayoub, H. (1994). “Analysis of concrete construction live loads on newly poured slabs.” J. Struct. Eng., 120(5), 1525–1542.
LaBoube, R. A., Schuster, R. M., and Wallace, J. (2002). “Web crippling and bending interaction of cold-formed steel members.” Research Rep. RP02-2, American Iron and Steel Institute, Washington, D.C.
Luttrell, L. D. (2009). “Standard deck section properties for SDI steel deck design handbooks.” Rep., Steel Deck Institute, Fox River Grove, IL.
McDowell, M. A., Fryar, C. D., Ogden, C. L., and Flegal, K. M. (2008). “Anthropometric reference data for children and adults: United states, 2003–2006.” National Health Statistics Rep. No. 10, National Center for Health Statistics, Hyattsville, MD.
Melchers, R. E. (1999). Structural reliability analysis and prediction, 2nd Ed., Wiley, NY.
Rackwitz, R. (1976). “Practical probabilistic approach to design.” Bulletin No. 112, Comite European du Beton, Paris.
Ravindra, M. K., and Galambos, T. V. (1978). “Load and resistance factor design for steel.” J. Struct. Div., 104(9), 1337–1353.
Rosowsky, D. V., and Stewart, M. G. (2001). “Probabilistic construction load model for multistory reinforced-concrete buildings.” J. Perform. Constr. Facil., 15(4), 145–152.
Structural Engineering Institute (SEI) and American Society of Civil Engineers (ASCE). (2002). “Design loads on structures during construction.” SEI/ASCE 37-02, Reston, VA.
Wallace, J. A., and Schuster, R. M. (2003). “Web crippling of cold formed steel multi-web deck sections subjected to end one-flange loading.” Research Rep. RP03-1, American Iron and Steel Institute, Washington, D.C.
Yu, W. W. (1970). “Discussion of ‘rational design of light gage beams’”. J. Struct. Div., 96(12), 2675–2677.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Jul 29, 2010
Accepted: May 20, 2011
Published online: Feb 15, 2012
Published in print: Mar 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.