Probabilistic Capacity Models and Fragility Estimates for Steel Pedestals Used to Elevate Bridges
Publication: Journal of Structural Engineering
Volume 137, Issue 12
Abstract
Using steel pedestals has become an effective method for elevating simply supported bridges in the United States. However, a method is needed to estimate their lateral load capacity and probability of failure subjected to different levels of applied loads. This paper shows the development of probabilistic models for the lateral load capacity of steel pedestals. The capacity models consider the prevailing uncertainties, including statistical uncertainty and model errors due to inaccuracy in the model form or missing variables. The proposed capacity models are used to estimate the conditional failure probability (or fragility) of an example steel pedestal for given sets of lateral and vertical loads. Because of the discontinuity in the limit state function, Monte Carlo simulation is used to estimate the fragility. Results show that for the studied steel pedestal, increasing vertical load decreases the probability of failure subjected to lateral loads. To investigate the effect of different random variables on the results, a sensitivity analysis is also conducted for the example steel pedestal.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Concrete Institute (ACI). (2008). “Building code requirements for structural concrete.” Commentary Rep. 318R-08, Farmington Hills, MI.
Cook, R. A., and Klingner, R. E. (1989). “Behavior and design of ductile multiple anchor steel to concrete connections.” Rep. No. CTR1126-3, Univ. of Texas, Austin, TX.
Dewolf, J. T., and Sarisley, E. F. (1980). “Column base plates with axial loads and moments.” J. Struct. Div., 106(11), 2167–2184.
Ditlevsen, O., and Madsen, H. O. (1996). Structural reliability methods, Wiley, New York.
Eligehausen, R., and Fichtner, S. (2007). “Stiffness requirements for baseplates.” Proc. 6th Int. Conf. on Fracture Mechanics of Concrete and Concrete Structures, RILEM, Catania, Italy, 945–949.
Eligehausen, R., Mallee, R., and Silva, J. (2006). Anchorage in concrete construction, Ernst & Sohn, Berlin.
Farrow, C. B., Frigui, I., and Klingner, R. E. (1996). “Tensile capacity of single anchors in concrete: Evaluation of existing formulas on an LRFD basis.” ACI Struct. J., 93(1), 128–137.
Fuchs, W., Eligehausen, R., and Breen, J. (1995). “Concrete capacity design (CCD) Approach for fastening to concrete.” ACI Struct. J., 92(1), 73–94.
Gardoni, P., Der Kiureghian, A., and Mosalam, K. M. (2002). “Probabilistic capacity models and fragility estimates for reinforced concrete columns based on experimental observations.” J. Eng. Mech., 128(10), 1024–1038.
Gardoni, P., Mosalam, K., and Der Kiureghian, M. A. (2003). “Probabilistic seismic demand models and fragility estimates for RC bridges.” J. Earthquake Eng., 7(Sp. Issue 1), 79–106.
Hite, M., DesRoches, R., and Leon, R. T. (2006). “Evaluation of the performance of bridge steel pedestals under seismic loads.” Structural Engineering and Public Safety—Proc., ASCE 2006 Structures Congress, ASCE, Reston, VA, 171.
Hite, M., DesRoches, R., and Leon, R. T. (2008). “Full-scale tests of bridge steel pedestals.” J. Bridge Eng., 13(5), 483–491.
Huer, T., and Eligehausen, R. (2007). “Splitting failure mode of bonded anchors.” Proc., 6th Int. Conf. on Fracture Mechanics of Concrete and Concrete Structures, RILEM, Catania, Italy, 753–760.
McMackin, P. J., Slutter, R. G., and Fisher, J. W. (1973). “Headed steel anchor under combined loading.” AISC Eng. J., 10(2), 43–52.
Meinheit, D. F., and Heidbrink, F. D. (1985). “Behavior of drilled-in expansion anchors.” Concr. Int., 7(4), 62–66.
Melchers, R. E. (1992). “Steel baseplate-footing-soil behaviour.” Connections in steel structures II: Behaviour, strength and design, R. Bjorhovde et al., eds., AISC, Chicago, 132–139.
Muratli, H., Klingner, R. E., and Graves, H. L., III. (2004). “Breakout capacity of anchors in concrete—Part 2: Shear.” ACI Struct. J., 101(6), 821–829.
Penserini, P., and Colson, A. (1989). “Ultimate limit strength of column-base connections.” J. Constr. Steel Res., 14, 301–320.
Shaikh, A. F., and Whayong, Y. (1985). “In-place strength of welded headed studs.” J. Prestressed Concr. Inst., 30(2), 56–81.
Stamatopoulos, G. N., and Ermopoulos, J. C. (1997). “Interaction curves for column base-plate connections.” J. Constr. Steel Res., 44(1–2), 69–89.
Subramanian, N., and Cook, R. A. (2004). “Behavior of grouted anchors.” Ind. Concrete J., 78(4), 14–21.
Thambiratnam, D. P., and Paramasivam, P. (1986). “Base plates under axial load and moment.” J. Struct. Eng., 112(5), 1166–1181.
Zamora, N. A., Cook, R. A., Konz, R., and Consolazio, G. R. (2003). “Behaviour and design of single, headed and unheaded, grouted anchors under tensile load.” ACI Struct. J., 100(2), 222–230.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Sep 30, 2009
Accepted: Feb 17, 2011
Published online: Feb 19, 2011
Published in print: Dec 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.