Storm and Gust Duration Effects on Design Wind Loads for Glass
Publication: Journal of Structural Engineering
Volume 137, Issue 12
Abstract
Duration effects on the design wind loads for glass are examined with respect to ASCE 7-10. Pressure time histories are created by combining variations of wind speed and wind direction from a “design cyclone” with pressure coefficients obtained from wind tunnel tests of low-rise buildings. The results indicate that the assumption of a 3-s gust duration in ASCE 7-10 may underestimate appropriate values for design loads for glass, with the degree of underestimation varying, depending primarily on the probability of exceedence of the peak pressures. On the basis of these results, modifications to the peak pressures specified in ASCE 7-10 are suggested that maintain the time duration of 3-s, consistent with current glass-design provisions.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The Institute for Catastrophic Loss Reduction and the Natural Sciences and Engineering Research Council of Canada provided funding for this research. E. Gavanski gratefully acknowledges scholarship support from Ministry of Education, Culture, Sports, Science and Technology of Japan. G. A. Kopp gratefully acknowledges the support provided by the Canada Research Chairs Program. The authors are particularly grateful to Dr. Joseph Minor for many helpful discussions and his ongoing interest.
References
ASCE. (2010). “Minimum design loads for buildings and other structures.” ASCE 7-10, Reston, VA.
ASTM. (2009). “Standard practice for determining load resistance of glass in buildings.” ASTM E1300-09, West Conshohocken, PA.
Beason, W. L., and Morgan, J. R. (1984). “Glass failure prediction model.” J. Struct. Eng., 110(2), 197–212.
Brewick, P., Divel, L., Butler, K., Bashor, R., and Kareem, A. (2009). “Consequence of urban aerodynamics and debris impact in extreme wind events.” Proc., 11th Americas Conf. on Wind Engineering, San Juan, Puerto Rico.
Brown, W. G. (1974). “A practicable formulation for the strength of glass and its special application to large plates.” Pub. No. NRC 14372, National Research Council Canada, Ottawa, ON, Canada.
Canadian General Standard Board (CGSB). (1989). “Structural design of glass for buildings.” CAN/CGSB-12.20-M89, National Standard of Canada, Ottawa, Canada.
Dalgliesh, W. A. (1979). “Assessment of wind loads for glazing design.” IAHR/IUTAM Symp., on Practical Experiences with Flow-Induced Vibrations, Karlsruhe, Germany, Springer-Verlag, Berkub, 696–708.
Davenport, A. G. (1975). “Discussion of Peterka, J. A., and Cermak, J. E., ‘Wind pressures on buildings-probability densities’ (complete text).” Research Rep. BLWT-4-1975, Boundary Layer Wind Tunnel Laboratory, Univ. of Western Ontario, London, ON, Canada.
Davenport, A. G. (1983). “Notes on the reliability of glass under wind action.” Research Rep. BLWT-2-1983, Boundary Layer Wind Tunnel Laboratory, Univ. of Western Ontario, London, ON, Canada.
Engineering Sciences Data Unit (ESDU). (1982). “Strong winds in the atmospheric boundary layer. Part 1. Mean-hourly wind speeds.” Data Item 82026, London.
Gavanski, E. (2009). “Behaviour of glass plates under wind loads.” Ph.D. thesis, Univ. of Western Ontario, London, ON, Canada.
Gavanski, E., and Kopp, G. A. (2011a). “Glass breakage tests under fluctuating wind loads.” J. Archit. Eng., 17(1), 34–41.
Gavanski, E., and Kopp, G. A. (2011b). “Examination of load resistance in window glass design.” J. Archit. Eng., 17(1), 42–50.
Henderson, D. J., Ginger, J. D., Morrison, M. J., and Kopp, G. A. (2009). “Simulated tropical cyclonic winds for low cycle fatigue loading of steel roofing.” Wind Struct., 12(4), 381–398.
Ho, T. C. E., Surry, D., Morrish, D., and Kopp, G. A. (2005). “The UWO contribution to the NIST aerodynamic database for wind loads on low buildings: Part 1. Archiving format and basic aerodynamic data.” J. Wind Eng. Ind. Aerodyn., 93(1), 1–30.
Holmes, J. D. (1985). “Wind action on glass and Brown’s integral.” Eng. Struct., 7(4), 226–230.
Jancauskas, E. D., Mahendran, M., and Walker, G. R. (1994). “Computer simulation of the fatigue behaviour of roof cladding during the passage of a tropical cyclone.” J. Wind Eng. Ind. Aerodyn., 51(2), 215–227.
Kawabata, S. (1996). “Study of wind resistant design of glass plate for cladding.” Ph.D. thesis, Nippon Sheet Glass Co. Ltd., Tokyo, Japan (in Japanese).
Kopp, G. A., Oh, J. H., and Inculet, D. R. (2008). “Wind-induced internal pressures in houses.” J. Struct. Eng., 134(7), 1129–1138.
Kopp, G. A., Surry, D., and Mans, C. (2005). “Wind effects of parapets on low buildings: Part 1. Basic aerodynamics and local loads.” J. Wind Eng. Ind. Aerodyn., 93(11), 817–841.
Lieblein, J. (1974). “Efficient methods of extreme-value methodology.” Rep. No. NBSIR 74-602, National Bureau of Standards, Washington, DC.
Liu, Z., Prevatt, D. O., Aponte-Bermudez, L. D., Gurley, K. R., Reinhold, T. A., and Akins, R. E. (2009). “Field measurement and wind tunnel simulation of hurricane wind loads on a single family dwelling.” Eng. Struct., 31(10), 2265–2274.
Morrison, M. J., and Kopp, G. A. (2011). “Performance of toe-nail connections under realistic wind loading.” Eng. Struct., 33(1), 69–76.
Peterka, J. A., and Cermak, J. E. (1978). “Wind tunnel study of Atlanta office building.” Fluid Mechanics and Wind Engineering Program, Colorado State Univ., Fort Collins, CO.
Reed, D. A., and Simiu, E. (1984). “Wind loading and strength of cladding glass.” J. Struct. Eng., 110(4), 715–729.
Stathopoulos, T. (1979). “Turbulent wind action on low rise buildings.” Ph.D. thesis, Univ. of Western Ontario, London, ON, Canada.
St. Pierre, L. M., Kopp, G. A., Surry, D., and Ho, T. C. E. (2005). “The UWO contribution to the NIST aerodynamic database for wind loads on low buildings. Part 2. Comparison of data with wind load provisions.” J. Wind Eng. Ind. Aerodyn., 93(1), 31–59.
Vega, R. E., and Konz, R. C. (2009). “Cladding performance of high-rise buildings in the Houston Central Business District during Hurricane Ike.” Proc., 11th Americas Conf. on Wind Engineering, San Juan, Puerto Rico.
Vickery, P. J., Masters, F. J., Powell, M. D., and Wadhera, D. (2009a). “Hurricane hazard modeling: The past, present, and future.” J. Wind Eng. Ind. Aerodyn., 97(7–8), 392–405.
Vickery, P. J., Wadhera, D., Powell, M. D., and Chen, Y. (2009b). “A hurricane boundary layer and wind field model for use in engineering applications.” J. Appl. Meteorol., 48, 381–405.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Nov 11, 2010
Accepted: Feb 16, 2011
Published online: Nov 15, 2011
Published in print: Dec 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.