Formulation of a Shear Resistance Mechanism for Inclined Cracks in RC Beams
Publication: Journal of Structural Engineering
Volume 137, Issue 12
Abstract
The shear capacity of reinforced concrete (RC) members is often associated with sliding across inclined planes often referred to as critical diagonal cracks. However, quantifying the shear capacity of the RC member in terms of the sliding resistance of an inclined plane as a result of shear-friction has been found to be a very complex problem. This is because these sliding planes transcend both initially cracked and uncracked planes, their capacity is also a function of the separation between these sliding planes, and invariably the shear-friction sliding capacity overestimates the shear capacity of the member. In this paper, a structural mechanics model that incorporates shear-friction is developed for quantifying the various components of the shear resistance across a critical diagonal crack because of both longitudinal reinforcement and stirrups. It is shown that the shear resistance is less than would be anticipated from the direct application of shear-friction theory because the compressive force in the uncracked region of concrete is less than can be anticipated and because the shear resistance must provide shear forces to maintain equilibrium prior to resisting the direct shear force.
Get full access to this article
View all available purchase options and get full access to this article.
References
Chen, J. F., and Teng, J. G. (2001). “Anchorage strength models for FRP and steel plates bonded to concrete.” J. Struct. Eng., 127(7), 784–791.
Haskett, M., Oehlers, D. J., and Mohamed Ali, M. S. (2008). “Local and global bond characteristics of steel reinforcing bars.” Eng. Struct., 30(2), 376–383.
Haskett, M., Oehlers, D. J., Mohamed Ali, M. S., and Wu, C. (2009). “Rigid body moment-rotation mechanism for reinforced concrete beam hinges.” Eng. Struct., 31(5), 1032–1041.
Hoang, L. C., and Nielsen, M. P. (1998). “Plasticity approach to shear design.” Cem. Concr. Compos., 20(6), 437–453.
Lucas, W. D. (2010). “The discrete rotation shear behaviour of RC beams.” Ph.D. thesis, Univ. of Adelaide, Submitted for examination.
Lucas, W., Oehlers, D. J., and Mohamed Ali, M. S. (2010). “Simulation of shear failure in RC beams without stirrups.” Submitted for publication.
Mattock, A. H., and Hawkins, N. M. (1972). “Shear transfer in reinforced concrete—Recent research.” J. Prestressed Concr. Inst., 17(2), 55–75.
Mohamed Ali, M. S., Oehlers, D. J., Griffith, M. C., and Seracino, R. (2008a). “Interfacial stress transfer of near surface mounted FRP-to-concrete joints.” Eng. Struct., 30(7), 1861–1868.
Mohamed Ali, M. S., Oehlers, D. J., and Griffith, M. C. (2008b). “Simulation of plastic hinges in FRP plated RC beams.” J. Compos. Constr., 12(6), 617–625.
Oehlers, D. J., Mohamed Ali, M. S., Griffith, M. C., Haskett, M., and Lucas, W. (2010). “A generic unified reinforced concrete model.” Proc. ICE Struct. Build., in press.
Oehlers, D. J., Mohamed Ali, M. S., Haskett, M., Lucas, W., Muhamad, R., and Visintin, P. (2011). “FRP reinforced concrete beams—a unified approach based on IC theory.” J. Compos. Constr., 15(3), 293–303.
Seracino, R., Raizal Saifulnaz, M. R., and Oehlers, D. J. (2007). “Generic debonding resistance of EB and NSM plate-to-concrete joints.” J. Compos. Constr., 11(1), 62–70.
Standards Australia. (2009). “AS 3600-2009 concrete structures.” Australian Standards, Standards Australia, Sydney, Australia.
Vecchio, F. J., and Collins, M. P. (1986). “The modified compression-field theory for reinforced concrete elements subjected to shear.” J. Am. Concr. Inst., 83(2), 219–231.
Walraven, J. C., and Reinhart, H. W. (1981). “Theory and Experiments on mechanical behaviour of cracks in plain and reinforced concrete subjected to shear loading.” Heron, 26(1A), 1–68.
Zhang, J. P. (1997). “Diagonal cracking and shear strength of reinforced concrete beams.” Mag. Concr. Res., 49(178), 55–65.
Zhang, N., Tan, K. H., and Leong, C. L. (2009). “Single span deep beams subjected to unsymmetrical loads.” J. Struct. Eng., 135(3), 239–252.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Jul 3, 2009
Accepted: Jan 7, 2011
Published online: Jan 10, 2011
Published in print: Dec 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.