Discussion of “Cyclic Behavior of Shear Links of Various Grades of Plate Steel” by Peter Dusicka, Ahmad M. Itani, and Ian G. Buckle
Publication: Journal of Structural Engineering
Volume 138, Issue 6
ST.1943-541X.0000356/asset/8d401209-a6b7-4a68-a29a-5cb20eae27f6/assets/(asce)st.1943-541x.0000356.fp.png)
Get full access to this article
View all available purchase options and get full access to this article.
References
Sabouri-Ghomi, S. (1989). “Quasi static and dynamic hysteretic behavior of unstiffened steel plate shear walls.” Doctoral dissertation, University of Cardiff, Cardiff, U.K.
Sabouri-Ghomi, S. (2002). Lateral load resisting systems: An introduction to steel shear walls, Anguizeh Publishing, Tehran, Iran.
Sabouri-Ghomi, S. (2004). Lateral load resisting systems: An innovative idea to application of easy-going steel, Anguizeh Publishing, Tehran, Iran.
Sabouri-Ghomi, S. (2007). “Applications of easy-going steel according to the tests.” Rep. 1503, K. N. Toosi Univ. Publication Bureau, Tehran, Iran.
Sabouri-Ghomi, S. (2009). “Energy absorption by braces in eccentrically -shape braced frames.” Rep. 2361, K. N. Toosi Univ. Publication Bureau, Tehran, Iran.
Sabouri-Ghomi, S., and Ebadi, P. (2008). “Concept improvement of behavior of -bracing systems by using easy-going steel.” Proc., 14th World Conf. on Earthquake Engineering, October 12–17, Beijing, China.
Sabouri-Ghomi, S., and Ebadi, P. (2010). “Laboratory evaluation of behavior of -braced frames and improvement behavior of them by employing easy-going steel (EGS).” Rep. 3-4938, Building and Housing Research Center, Tehran, Iran.
Sabouri-Ghomi, S., Ebadi, P., and Sajadi, R. A. (2007a). “The seismic benefits of using easy-going steel in -braced frames.” Alhosn Univ. J. Eng. Appl. Sci., 1(1), 103–111.
Sabouri-Ghomi, S., Ebadi, P., and Sajadi, R. A. (2007b). “The seismic benefits of using easy-going steel in -braced frames.” Proc., 8th Int. Conf. on Multi-Purpose High-Rise Towers and Tall Buildings, December 10–11, Abu Dhabi, UAE.
Sabouri-Ghomi, S., and Gholhaki, M. (2006a). “Cyclic tests on two specimens of three-story ductile steel plate shear wall.” Rep. 3-2446, Building and Housing Research Center, Tehran, Iran.
Sabouri-Ghomi, S., and Gholhaki, M. (2006b). “Effect of rigid and simple beam-to-column connection on energy dissipation of ductile steel plate shear walls.” J. Build. Eng. Housing Sci., 8(4), 31–44.
Sabouri-Ghomi, S., and Gholhaki, M. (2008a). “Discussion of ‘Framed steel plate wall behavior under cyclic lateral loading.’” J. Struct. Eng.JSENDH, 134(10), 1680–1681.
Sabouri-Ghomi, S., and Gholhaki, M. (2008b). ”Experimental study of two three-story ductile steel plate shear walls.” Amirkabir J. Civ. Eng., 19(68-C), 29–42.
Sabouri-Ghomi, S., and Gholhaki, M. (2008c). “Tests of two-story ductile steel plate shear walls.” Proc., 2008 Structures Cong.: Crossing Borders, April, Vancouver, Canada.
Sabouri-Ghomi, S., and Gholhaki, M. (2008d). “Ductility of thin steel plate shear walls.” Asian J. Civ. Eng. (Build. Hous.), 9(2), 153–166.
Sabouri-Ghomi, S., and Sajjadi, R. (2007a). “Comparing steel plate shear walls with structural steel plate and easy-going steel plate.” Proc., 3rd Nat. Cong. on Civil Engineering, May 1–3, Tabriz Univ., Tabriz, Iran.
Sabouri-Ghomi, S., and Sajjadi, R. (2007b). “Hysteresis and dynamic behavior of concentrically braced frames (CBF) with structural and easy-going steel.” Proc., 5th Int. Conf. on Seismology and Earthquake Engineering, May 13–16, Tehran, Iran.
Sabouri-Ghomi, S., and Sajjadi, R. A. (2008). “Experimental investigation of force modification factor and energy absorption of ductile steel plate shear walls with stiffener and without stiffener.” J. Struct. Steel, 3(Summer), 13–25.
Sabouri-Ghomi, S., and Saneipour, M. (2007a). “Hysteresis behavior of central yielding damped braced frames with structural and easy-going steel.” Proc., 3rd Nat. Cong. on Civil Engineering, Tabriz Univ., May 1–3, Tabriz, Iran.
Sabouri-Ghomi, S., and Saneipour, M. (2007b). “Nonlinear behavior of central yielding damped braced frames with different percentage of opening by using structural and easy-going steel.” Proc., 5th Int. Conf. on Seismology and Earthquake Engineering, May 13–16, Tehran, Iran.
Sabouri-Ghomi, S., Ventura, C. E., and Kharazi, M. H. K. (2005). “Shear analysis and design of ductile steel plate walls.” J. Struct. Eng.JSENDH, 131(6), 878–889.
Sabouri-Ghomi, S., and Ziaie, M. (2007). “Application of easy-going steel in link beams of EBF.” Proc., 2nd Conf. on Retrofitting of Structures, December 24–25, Kerman, Iran.
Sabouri-Ghomi, S., and Ziaei, M. (2008a). “Study on the feasibility of transferring the energy absorption from link beam to braces in eccentrically braced frames.” Proc., 14th World Conf. on Earthquake Engineering, October 12–17, Beijing, China.
Sabouri-Ghomi, S., and Ziaei, M. (2008b). “A study on the behavior of shear link beam made of easy-going steel in eccentrically braced frames.” Proc., 14th World Conf. on Earthquake Engineering, October 12–17, Beijing, China.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 138 • Issue 6 • June 2012
Pages: 835 - 837
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Oct 27, 2010
Accepted: Dec 15, 2010
Published online: May 15, 2012
Published in print: Jun 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.