Buckling of Laminated Glass Elements in Compression
Publication: Journal of Structural Engineering
Volume 137, Issue 8
Abstract
Monolithic and laminated glass beams or panes are frequently adopted as structural elements in modern and innovative architectural applications. Several aspects related to the load-carrying behavior of these new construction elements are very complex to evaluate. For example, the degradation of mechanical properties of the interlayer, the amplitude of the imperfections affecting the beams, or the presence of added external loads represent only some aspects that contribute to the complexity of evaluating the buckling response of these innovative structural components, characterized by high slenderness ratios and brittle behavior in tension. For these reasons, the buckling of laminated glass beams in compression is investigated in this paper by using a simple analytical model developed on the basis of Newmark’s theory of composite beams with deformable connections. Buckling curves are presented to illustrate how a combination of simultaneous weathering variations, initial imperfections, or particular load conditions can affect the response of compressed laminated glass beams and cause their failure.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aşik, M. Z., and Tezcan, S. (2005). “Laminated glass beams: Strength factor and temperature effect.” Comput. Struct., 83, 1742–1753.
Belis, J., Vander Beken, J., Van Impe, R., and Callewaert, D. (2007). “Performance of glass-ionoplast laminates above room temperature.” Glass Performance Days, Tampere, Finland, 639–642.
Bennison, S. J., Quin, M. H. X., and Davies, P. S. (2008). “High-performance laminated glass for structurally efficient glazing.” HKIE/IStructE Joint Structural Division Annual Seminar: Innovative Light-Weight Structures and Sustainable Facades, Hong Kong.
Bennison, S. J., Smith, C. A., and Van Duser, A. (2002). “Structural performance of laminated glass made with a stiff interlayer.” Symp. on the Use of Glass in Buildings, Pittsburgh.
Blaauwendraad, J. (2007). “Buckling of laminated glass columns.” Heron, 52(1–2), 147–164.
Čas, B., Saje, M., and Planinc, I. (2007). “Buckling of layered wood columns.” Adv. Eng. Softw., 38, 586–597.
Ensslen, F. (2007). “Influences of laboratory and natural weathering on the durability of laminated safety glass.” Glass Performance Days, Tampere, Finland, 584–590.
European Committee for Standardisation (CEN). (2000). “Glass in building—Design of glass panes—Part 2: Design for uniformly distributed loads.” prEN 13474-2, Brussels, Belgium.
Haldimann, M., Luible, A., and Overend, M. (2008). Structural use of glass, International Association for Bridge and Structural Engineering, Zürich, Switzerland, 107–130.
Hibbit, Karlsson, and Sorensen. (2005). ABAQUS ver. 6.5 user manual, Pawtucket, RI.
Kasper, R., Sedlacek, G., and Feldmann, M. (2007). Das biegedrillknickverhalten von glasträgern aus verbundglas, Ernst & Sohn, Verlag für Architektur unf technische Wissenschaften, Berlin.
Kryžanowski, A., Schnabl, S., Turk, G., and Planinc, I. (2009). “Exact slip-buckling analysis of two-layer composite columns.” Int. J. Solids Struct., 46(14–15), 2929–2938.
Luible, A., and Crisinel, M. (2004). “Buckling strength of glass elements in compression.” Struct. Eng. Int., 14(2), 120–125.
Luible, A., and Crisinel, M. (2006). “Design of glass beams subjected to lateral torsional buckling.” Proc., IABSE Symp. Responding to Tomorrow’s Challenges in Structural Engineering, Budapest, Hungary.
Meissner, M., and Sackmann, V. (2006). On the effect of artificial weathering on the shear bond and the tear strength of two different interlayers of laminated glass, ISAAG, Munich, Germany.
Newmark, N. M., Siess, C. P., and Viest, I. M. (1951). “Tests and analysis of composite beams with incomplete interaction.” Proc. Soc. Exp. Stress Anal., 9(1), 75–92.
Schnabl, S., Saje, M., Turk, G., and Planinc, I. (2007). “Analytical solution of two-layer beam taking into account interlayer slip and shear deformation.” J. Struct. Eng., 133(6), 886–894.
Stamm, K., and Witte, H. (1974). Sandwichkonstruktionen—Berechnung, fertigung, ausführung, Springer Verlag, Germany.
Weller, B., Wünsch, J., and Härth, K. (2005). “Experimental study on different interlayer materials for laminated glass.” Glass Processing Days, Tampere, Finland, 120–123.
Xu, R., and Wu, Y. (2007). “Static, dynamic, and buckling analysis of partial interaction composite members using Timoshenko’s beam theory.” Int. J. Mech. Sci., 49(10), 1139–1155.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Apr 22, 2010
Accepted: Oct 6, 2010
Published online: Oct 20, 2010
Published in print: Aug 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.