Moment-Carrying Capacity of Dovetailed Mortise and Tenon Joints with or without Beam Shoulder
Publication: Journal of Structural Engineering
Volume 137, Issue 7
Abstract
This study aimed to evaluate the influence of beam shoulder on the moment-carrying capacity of traditional post-beam joints, dovetailed mortise, and tenon joints. The specimens were manufactured by a computer numerical controlled (CNC) cutting machine with Japanese larch six-ply glulams (glued laminated timber), and moment-carrying capacity was investigated by static loading tests. The results of the tests indicated that the moment resistance, joint stiffness, and failure modes were different with or without beam shoulder. The results also indicated that all joints types underwent significant deformation without breaking and maintained after the yield point. The failure mode, which included post splitting, shear failure of mortise branches, or embedment failure of tenon, was dependent on the presence of the beam shoulder. The results indicated that the beam shoulder significantly affected the performance of the post-beam joint. It was concluded that the beam shoulder reinforced the dovetailed mortise and tenon joints. Hence, the beam shoulder must be considered as an important factor in the structural design of traditional post-beam joints.
Get full access to this article
View all available purchase options and get full access to this article.
References
Chang, G. I. (1988). Wooden structures, Bosungmoonhwasa, Seoul (in Korean).
Chang, W. S., Hsu, M. F., and Komatsu, K. (2006). “Rotational performance of traditional Nuki joints with gap I: Theory and verification.” J. Wood Sci., 52(1), 58–62.
Choi, J. W., and Hwang, J. E. (2005). “Kota view: Simulating traditional Korean architecture interactively and intelligently on the web.” Autom. Constr., 14(1), 1–14.
Eckelman, C. A., and Haviarova, E. (2008). “Rectangular mortise and tenon semirigid joint connection factors.” For. Prod. J., 58(12), 49–55.
Erdil, Y. Z., Kasal, A., and Eckelman, C. A. (2005). “Bending moment capacity of rectangular mortise and tenon furniture joints.” For. Prod. J., 55(12), 209–213.
Fang, D. P., Iwasaki, S., Yu, M. H., Shen, Q. P., Miyamoto, Y., and Hikosaka, H. (2001a). “Ancient Chinese timber architecture. I: Experimental study.” J. Struct. Eng., 127(11), 1348–1357.
Fang, D. P., Iwasaki, S., Yu, M. H., Shen, Q. P., Miyamoto, Y., and Hikosaka, H. (2001b). “Ancient Chinese timber architecture. II: Dynamic characteristics.” J. Struct. Eng., 127(11), 1358–1364.
Han, S. R. (2006). “Evaluation of the mechanical performance of column and girder joint by various types in traditional wooden building.” M.S. thesis, Seoul National Univ., Seoul.
Harada, M., Hayashi, Y., Hayashi, T., Karube, M., and Ohgama, T. (2005). “Effect of moisture content of members on mechanical properties of timber joints.” J. Wood Sci., 51(3), 282–285.
Hwang, J. K., and Hong, S. G. (2008). “Resisting capacity and fracture mode for tension load at column-connection beam of traditional wooden structure.” J. Architectural Inst. Korea (Struct. Const.), 24(11), 41–52 (in Korean).
Jung, Y. S. (2007). “A study on the connection methods of the upper parts of the pillars at wooden architecture in Joseon dynasty.” J. Architectural Inst. Korea (Plann. Des.), 23(6), 165–174 (in Korean).
Kim, Y. S., and Song, I. H. (2005). “A research on the construction method of the upper part of the post, traditional urban housing in Bukchon, Seoul.” J. Architectural Inst. Korea (Plann. Des.), 21(11), 171–178 (in Korean).
Lee, Y. W., Hong, S. G., Hwang, J. K., and Jung, S. J. (2008). “Experiments on the lateral load capacity of end lap joint of Dori-directional frame.” J. Architectural Inst. Korea (Struct. Const.), 24(7), 29–36 (in Korean).
Seo, J. M., Choi, I. K., and Lee, J. R. (1999). “Static and cyclic behavior of wooden frames with tenon joints under lateral load.” J. Struct. Eng., 125(3), 344–349.
Tankut, A. N., and Tankut, N. (2005). “The effects of joint forms (shape) and dimensions on the strengths of mortise and tenon joints.” Turk. J. Agric. For., 29(6), 493–498.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Nov 6, 2009
Accepted: Sep 20, 2010
Published online: Sep 24, 2010
Published in print: Jul 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.