Cyclic Loading Test for Reinforced Concrete Frame with Thin Steel Infill Plate
Publication: Journal of Structural Engineering
Volume 137, Issue 6
Abstract
An experimental study was performed to investigate the cyclic behavior of walls that are composed of reinforced concrete boundary frames and thin steel infill plates. For this purpose, three-story steel plate infilled walls (SPIW) were tested. The parameters in this test were the reinforcement ratio of the columns and opening in the infill plates. A reinforced concrete infilled wall (RCIW) and a reinforced concrete frame (RCF) were also tested for comparison. The deformation capacity of the SPIW specimens was significantly greater than that of the RCIW specimen, though the specimens exhibited an identical load-carrying capacity. Similar to the steel plate walls with steel boundary frames, the SPIW specimens showed excellent strength, deformation capacity, and energy dissipation capacity. Furthermore, by using the steel infill plates, shear cracking and failure of the column-beam joints were prevented. By using the strip model, the strength and initial stiffness of the SPIW specimens were predicted. The prediction results were compared with the test results.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was financially supported by the Korean Ministry of Land, Transportation and Maritime Affairs (MLTM) through the High-tech Urban Development Program (HUDP) of the Korea Institute of Construction & Transportation Technology Evaluation and Planning (KICTEP); the authors are grateful to the authorities for their support.
References
American Concrete Institute (ACI). (2008). “Building code requirements for structural concrete and commentary.” ACI 318-08 and ACI 318R-08, Farmington Hills, MI.
Baldelli, J. A. (1983). “Steel shear walls for existing buildings.” Eng. J., 20(2), 70–77.
Berman, J., and Bruneau, M. (2003). “Plastic analysis of steel plate shear walls.” J. Struct. Eng., 129(11), 1448–1456.
Caccese, V., Elgaaly, M., and Chen, R. (1993). “Experimental study of thin steel-plate shear walls under cyclic load.” J. Struct. Eng., 119(2), 573–587.
Choi, I. R., and Park, H. G. (2008). “Ductility and energy dissipation capacity of shear-dominated steel plate walls.” J. Struct. Eng., 134(9), 1495–1507.
Choi, I. R., and Park, H. G. (2009). “Steel plate shear walls with various infill plate designs.” J. Struct. Eng., 135(7), 785–796.
Driver, R. G., Kulak, G. L., Kennedy, D. J. L., and Elwi, A. E. (1998). “Cyclic test of a four-storey steel plate shear wall.” J. Struct. Eng., 124(2), 111–120.
Elgaaly, M. (1998). “Thin steel plate shear walls behavior and analysis.” Thin-Walled Struct., 32, 151–180.
Lubell, A. S., Prion, H. G. L., Ventura, C. E., and Rezai, M. (2000). “Unstiffened steel plate shear wall performance under cyclic loading.” J. Struct. Eng., 126(4), 453–460.
Mazzoni, S., McKenna, F., Scott, M. H., and Fenves, G. L. (2006). “Open system for earthquake engineering simulation, user command-language manual, Version 1.7.3.” Pacific Earthquake Engineering Research Center, Univ. of California, Berkeley, CA 〈http://opensees.berkley.edu/OpenSees/manuals/usermanual/index.html〉.
Park, H. G., Kwack, J. H., Jeon, S. W., Kim, W. K., and Choi, I. R. (2007). “Framed steel plate wall behavior under cyclic lateral loading.” J. Struct. Eng., 133(3), 378–388.
Precast/Prestressed Concrete Institute (PCI). (1999). PCI design handbook: Precast and prestressed concrete, 5th Ed., Chicago.
Thorburn, L. J., Kulak, G. L., and Montgomery, C. J. (1983). “Analysis and design of steel shear wall system.” Structural Engineering Rep. No. 107, Dept. of Civil Engineering, Univ. of Alberta, Alberta, Canada.
Timler, P. A., and Kulak, G. L. (1983). “Experimental study of steel plate shear walls.” Structural Engineering Rep. No. 114, Dept. of Civil Engineering, Univ. of Alberta, Alberta, Canada.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Jul 7, 2009
Accepted: Sep 12, 2010
Published online: Sep 22, 2010
Published in print: Jun 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.