TECHNICAL PAPERS
Aug 25, 2010

Dimensional Response Analysis of Bilinear Systems Subjected to Non-pulselike Earthquake Ground Motions

Publication: Journal of Structural Engineering
Volume 137, Issue 5

Abstract

The maximum inelastic response of bilinear single-degree-of-freedom (SDOF) systems when subjected to ground motions without distinguishable pulses is revisited with dimensional analysis by identifying timescales and length scales in the time histories of recorded ground motions. The characteristic length scale is used to normalize the peak inelastic displacement of the bilinear system. The paper adopts the mean period of the Fourier transform of the ground motion as an appropriate timescale and examines two different length scales that result from the peak ground acceleration and the peak ground velocity. When the normalized peak inelastic displacement is presented as a function of the normalized strength and normalized yield displacement, the response becomes self-similar, and a clear pattern emerges. Accordingly, the paper proposes two alternative predictive master curves for the response that solely involve the strength and yield displacement of the bilinear SDOF system in association with either the peak ground acceleration or the peak ground velocity, together with the mean period of the Fourier transform of the ground motion. The regression coefficients that control the shape of the predictive master curves are based on 484 ground motions recorded at rock and stiff soil sites and are applicable to bilinear SDOF systems with a postyield stiffness ratio equal to 2% and an inherent viscous damping ratio equal to 5%.

Get full access to this article

View all available purchase options and get full access to this article.

References

Akkar, S., and Kucukdogan, B. (2008). “Direct use of PGV for estimating peak nonlinear oscillator displacements.” Earthquake Eng. Struct. Dyn., 37, 1411–1433.
Akkar, S., and Ozen, O. (2005). “Effect of peak ground velocity on deformation demands for SDOF systems.” Earthquake Eng. Struct. Dyn., 34(13), 1551–1571.
Applied Technology Council (ATC). (1996). “Seismic evaluation and retrofit of concrete buildings.” Rep. No. ATC-40, Redwood City, CA.
Baker, J. (2007). “Quantitative classification of near-fault ground motions using wavelet analysis.” Bull. Seismol. Soc. Am., 97(5), 1486–1501.
Barenblatt, G. I. (1996). Scaling, self similarity, and intermediate asymptotics, Cambridge University Press, Cambridge, UK.
Boore, D. M., and Atkinson, G. M. (2008). “Ground-motion prediction equations for the average horizontal component of PGA, PGV, and 5%-damped PSA at spectral periods between 0.01 s and 10.0 s.” Earthquake Spectra, 24(1), 99–138.
Chopra, A. K., and Chintanapakdee, C. (2004). “Inelastic deformation ratios for design and evaluation of structures: Single-degree-of-freedom bilinear systems.” J. Struct. Eng., 130(9), 1309–1319.
Dimitrakopoulos, E. G., Kappos, A. J., and Makris, N. (2008). “Dimensional response analysis of structures for records without distinct pulses.” Modeling of Structures, Int. Scientific Symp., Bosnia, Monstar, 13–15.
FEMA. (1997). “NEHRP guidelines for the seismic rehabilitation of buildings.” Rep. No. FEMA-273 (Guidelines) and Rep. No. FEMA-274 (Commentary), Washington, DC.
FEMA. (2004). “Improvement of nonlinear static seismic analysis procedures.” FEMA-440 (ATC-55 Project), Washington, DC.
Iwan, W. D. (1980). “Estimating inelastic response spectra from elastic spectra.” Earthquake Eng. Struct. Dyn., 8, 375–388.
Karavasilis, T. L., Makris, N., Bazeos, N., and Beskos, D. E. (2010). “Dimensional response analysis of multistory regular steel MRF subjected to pulselike earthquake ground motions.” J. Struct. Eng., 136(8), 921–932.
Langhaar, H. L. (1951). Dimensional analysis and theory of models, Wiley, New York, NY.
Makris, N., and Black, C. J. (2004a). “Dimensional analysis of bilinear oscillators under pulse-type excitations.” J. Eng. Mech., 130(9), 1019–1031.
Makris, N., and Black, C. J. (2004b). “Dimensional analysis of rigid-plastic and elastoplastic structures under pulse-type excitations.” J. Eng. Mech., 130(9), 1006–1018.
Makris, N., and Black, C. J. (2004c). “Evaluation of peak ground velocity as a ‘good’ intensity measure for near-source ground motions.” J. Eng. Mech., 130(9), 1032–1044.
Makris, N., and Psychogios, T. (2006). “Dimensional response analysis of yielding structures with first-mode dominated response.” Earthquake Eng. Struct. Dyn., 35, 1203–1224.
MATLAB. (1997). The language of technical computing, Version 5.0, Mathworks Inc., Natick, MA.
Mavroeidis, G. P., and Papageorgiou, A. S. (2003). “A mathematical representation of near-fault ground motions.” Bull. Seismol. Soc. Am., 93(3), 1099–1131.
Mylonakis, G., and Voyagaki, E. (2006). “Yielding oscillator subjected to simple pulse waveforms: Numerical analysis and closed-form solutions.” Earthquake Eng. Struct. Dyn., 35, 1949–1974.
Pacific Earthquake Engineering Research Center (PEER). 〈http://peer.berkeley.edu/smcat〉 (Jan. 9, 2009).
Rathje, E. M., Faraj, F., Russell, S., and Bray, J. D. (2004). “Empirical relationships for frequency content parameters of earthquake ground motions.” Earthquake Spectra, 20(1), 119–144.
Riddell, R. (2007). “On ground motion intensity indices.” Earthquake Spectra, 23(1), 147–173.
Ruiz-Garcia, J., and Miranda, E. (2003). “Inelastic displacement ratios for evaluation of existing structures.” Earthquake Eng. Struct. Dyn., 32(8), 1237–1258.
Veletsos, A., and Newmark, N. M. (1960). “Effect of inelastic behaviour on response of simple systems to earthquake motions.” Proc., 2nd World Conf. on Earthquake Engineering Vol. II, Tokyo, 895–912.
Veletsos, A. S., Newmark, N. M., and Chelepati, C. V. (1965). “Deformation spectra for elastic and elastoplastic systems subjected to ground shock and earthquake motions.” Proc., 3rd World Conf. on Earthquake Engineering, Vol. II, Wellington, New Zealand, 663–682.

Information & Authors

Information

Published In

Go to Journal of Structural Engineering
Journal of Structural Engineering
Volume 137Issue 5May 2011
Pages: 600 - 606

History

Received: Jan 30, 2009
Accepted: Aug 20, 2010
Published online: Aug 25, 2010
Published in print: May 1, 2011

Permissions

Request permissions for this article.

Authors

Affiliations

Theodore L. Karavasilis [email protected]
Dept. Lecturer in Civil Engineering, Dept. of Engineering Science, Univ. of Oxford, Oxford OX1 3PJ, UK. E-mail: [email protected]
Choung-Yeol Seo [email protected]
Research Associate, ATLSS Center, Dept. of Civil and Environmental Engineering, Lehigh Univ., Bethlehem, PA 18015. E-mail: [email protected]
Nicos Makris, M.ASCE [email protected]
Professor of Structural Engineering and Applied Mechanics, Dept. of Civil Engineering, Univ. of Patras, 26500 Patras, Greece (corresponding author). E-mail: [email protected]

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

Cited by

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share