Structural System Parameter Selection Based on Collapse Potential of Buildings in Earthquakes
Publication: Journal of Structural Engineering
Volume 136, Issue 8
Abstract
This paper attempts to provide insight into the sensitivity of the collapse capacity of moment-resisting frame and shear wall structures to variation in basic structural parameters, and the choice of an appropriate ground motion intensity measure, based on probabilistic estimation of the collapse capacity of a structural system. The effects of fundamental period and base shear strength and of deformation and deterioration properties of structural components on the collapse capacity of frame and wall structures are quantified. It is shown that the collapse potential of moment-resisting frames is highly sensitive to the ratio of column to beam strength; increasing this parameter from 1.2 to 2.4 will increase the median of collapse capacity by up to 90%. Using a scalar ground motion intensity measure for estimating the collapse capacity can lead to underestimation of median collapse capacity by up to 50%, compared to using a vector-valued intensity measure. The provided information can be used to assist in the selection of a suitable structural system and associated parameters in design for collapse safety. Closed-form solutions are formulated using a database of collapse fragility curves developed for the sensitivity study. Application of these closed-form solutions for design decision making is illustrated through a comprehensive example.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported by the NSF sponsored Pacific Earthquake Engineering Research (PEER) Center, and was carried out at Stanford University’s John A. Blume Earthquake Engineering Center as part of a comprehensive effort to develop basic concepts for PBEE and supporting data on seismic demands and capacities. The support is gratefully acknowledged. Any opinions, findings, and conclusions or recommendations expressed in this paper are those of the writers and do not necessarily reflect the views of the sponsors. This publication is dedicated to Professor Franz Ziegler of the Technical University of Vienna, Austria, at the occasion of his 70th birthday. Professor Ziegler has been a good friend of the second writer since the latter spent three months at the Technical University of Vienna in Spring 1995. It was a great pleasure and rewarding experience to have spent a sabbatical leave at Professor Ziegler’s institute and have had the opportunity to discuss then, and many times since, structural dynamics with such an eminent leader in applied mechanics. Beste Glückwünsche zum Geburtstag, lieber Franz.NSF
References
Abrahamson, N. A., and Silva, W. J. (1997). “Empirical response spectral attenuation relations for shallow crystal earthquakes.” Seismol. Res. Lett., 68, 94–126.
ASCE. (2005). “Minimum design loads for buildings and other structures.” ASCE 7-05, Reston, Va.
Baker, J. W., and Cornell, C. A. (2005). “Vector-valued ground motion intensity measure consisting of spectral acceleration and epsilon.” Earthquake Eng. Struct. Dyn., 34(10), 1193–1217.
Cornell, C. A., Jalayer, F., Hamburger, R. O., and Foutch, D. A. (2002). “Probabilistic basis for 2000 SAC/FEMA steel moment frame guidelines.” J. Struct. Eng., 128(4), 526–533.
FEMA. (2009). “Quantification of building seismic performance factors,” Rep. FEMA P695, Federal Emergency Management Agency, Washington, D.C.
Haselton, C. B., and Deierlein, G. G. (2007). “Assessing seismic collapse safety of modern reinforced concrete frame.” PEER Rep. 2007/08, Pacific Engineering Research Center, Univ. of California, Berkeley, Calif.
Haselton, C. B., Liel, A. B., Taylor Lange, S., and Deierlein, G. G. (2007). “Beam-column element model calibrated for predicting flexural response leading to global collapse of RC frame buildings.” PEER Rep. 2007/12, Pacific Engineering Research Center, Univ. of California, Berkeley, Calif.
Ibarra, L. F., and Krawinkler, H. (2005). “Global collapse of frame structures under seismic excitations.” PEER Rep. 2005/06, Pacific Earthquake Engineering Research Center, Univ. of California, Berkeley, Calif.
Ibarra, L. F., Medina, R. A., and Krawinkler, H. (2005). “Hysteretic models that incorporate strength and stiffness deterioration.” Earthquake Eng. Struct. Dyn., 34(12), 1489–1511.
Krawinkler, H., and Zareian, F. (2007). “Prediction of collapse—How realistic and practical is it, and what can we learn from it?” Struct. Des. Tall Spec. Build., 16(5), 633–653.
Lignos, D., and Krawinkler, H. (2009). “Sidesway collapse of deteriorating structural systems under seismic excitations.” Rep. No. TR 172, John A. Blume Earthquake Engineering Center, Dept. of Civil and Environmental Engineering, Stanford Univ., Calif.
Medina, R. A., and Krawinkler, H. (2003). “Seismic demands for nondeteriorating frame structures and their dependence on ground motions.” Rep. No. 144, John A. Blume Earthquake Engineering Center, Dept. of Civil Engineering, Stanford Univ., Stanford, Calif.
Neter, J., Kutner, M., Nachtsheim, C. J., and Wasserman, W. (1996). Applied linear statistical models, 4th Ed., McGraw-Hill, Boston.
Prakash, V., Powell, G., and Campbell, S. (1993). “DRAIN-2DX: Basic program description and user guide.” Rep. No. UCB/SEMM-93/17, Univ. California at Berkeley, Berkeley, Calif.
Vamvatsikos, D., and Cornell, C. A. (2002). “Incremental dynamic analysis.” Earthquake Eng. Struct. Dyn., 31(3), 491–514.
Zareian, F., and Krawinkler, H. (2007). “Assessment of probability of collapse and design for collapse safety.” Earthquake Eng. Struct. Dynam., 36(13), 1901–1914.
Zareian, F., and Krawinkler, H. (2009). “Simplified performance-based earthquake engineering.” Rep. No. 169, John A. Blume Earthquake Engineering Center, Dept. of Civil Engineering, Stanford Univ., Stanford, Calif.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Apr 9, 2009
Accepted: Feb 1, 2010
Published online: Jul 15, 2010
Published in print: Aug 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.