Scaling Earthquake Ground Motions for Performance-Based Assessment of Buildings
Publication: Journal of Structural Engineering
Volume 137, Issue 3
Abstract
The impact of alternate ground-motion scaling procedures on the distribution of displacement responses in simplified structural systems is investigated. Recommendations are provided for selecting and scaling ground motions for performance-based assessment of buildings. Four scaling methods are studied, namely, (1) geometric-mean scaling of pairs of ground motions, (2) spectrum matching of ground motions, (3) first-mode-period scaling to a target spectral acceleration, and (4) scaling of ground motions per the distribution of spectral demands. Data were developed by nonlinear response-history analysis of a large family of nonlinear single degree-of-freedom (SDOF) oscillators that could represent fixed-base and base-isolated structures. The advantages and disadvantages of each scaling method are discussed. The relationship between spectral shape and a ground-motion randomness parameter, ε, is presented. A scaling procedure that explicitly considers spectral shape is proposed.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abrahamson, N. A. (1998). “Non-stationary spectral matching program RSPMATCH.” PG&E, Internal Rep.
American Society of Civil Engineers (ASCE). (2006). “Minimum design loads for buildings and other structures.” ASCE/SEI 7-05, ASCE, Reston, VA.
Applied Technology Council (ATC). (2008). “Guidelines for seismic performance assessment of buildings.” ATC-58 50% Draft, ATC, Redwood City, CA.
Baker, J. W., and Cornell, C. A. (2005). “A vector-valued ground motion intensity measure consisting of spectral acceleration and epsilon.” Earthquake Eng. Struct. Dyn., 34(10), 1193–1217.
Baker, J. W., and Cornell, C. A. (2006). “Spectral shape, epsilon and record selection.” Earthquake Eng. Struct. Dyn., 35(9), 1077–1095.
Bazzurro, P., and Luco, N. (2006). “Do scaled and spectrum-matched near-source records produce biased nonlinear structural responses?” Proc., 8th U.S. National Conf. on Earthquake Engineering, Earthquake Engineering Research Institute (EERI), Oakland, CA.
Boore, D. M., and Atkinson, G. M. (2008). “Ground-motion prediction equations for the average horizontal component of PGA, PGV, and 5%-Damped PSA at spectral periods between 0.01 s and 10.0 s.” Earthquake Spectra, 24(1), 99–138.
Campbell, K. W., and Bozorgnia, Y. (2008). “NGA ground motion model for the geometric mean horizontal component of PGA, PGV, PGD and 5% damped linear elastic response spectra for periods ranging from 0.01 to 10 s.” Earthquake Spectra, 24(1), 139–171.
Carballo, J. E., and Cornell, C. A. (2000). “Probabilistic seismic demand analysis: Spectrum matching and design.” Rep. No. RMS-41, Dept. of Civil and Environmental Engineering, Stanford Univ., Stanford, CA.
Chiou, B. S.-J., and Youngs, R. R. (2008). “A NGA model for the average horizontal component of peak ground motion and response spectra.” Earthquake Spectra, 24(1), 173–215.
Cornell, C. A. (2006). “Should uniform hazard spectra be used for design? How should design response spectra be determined considering uniform hazard spectra from design maps and hazard deaggregation data?” Workshop Handouts, 3rd ATC-35/USGS National Earthquake Ground-Motion Mapping Workshop, Applied Technology Council, San Mateo, CA.
Federal Emergency Management Agency (FEMA). (1997). “NEHRP recommended provisions for seismic regulations for new buildings and other structures.” Rep. No. 273/274, FEMA, Washington, DC.
Federal Emergency Management Agency (FEMA). (2000a). “Prestandard and commentary for the seismic rehabilitation of buildings.” Rep. No. 356, FEMA, Washington, DC.
Federal Emergency Management Agency (FEMA). (2000b). “Recommended seismic design criteria for new steel moment-frame buildings.” Rep. No. 350, FEMA, Washington, DC.
Federal Emergency Management Agency (FEMA). (2004). “NEHRP recommended provisions for seismic regulations for new buildings and other structures.” Rep. No. 450-1/450-2, FEMA, Washington, DC.
Hancock, J., et al. (2006). “An improved method of matching response spectra of recorded earthquake ground motion using wavelets.” J. Earthquake Eng., 10(Special Issue 1), 67–89.
Huang, Y.-N., Whittaker, A. S., and Luco, N. (2008). “Performance assessment of conventional and base-isolated nuclear power plants for earthquake and blast loadings.” MCEER-08-0029, Multidisciplinary Center for Earthquake Engineering Research, State Univ. of New York at Buffalo, NY.
Iervolino, I., and Cornell, C. A. (2005). “Record selection for nonlinear seismic analysis of structures.” Earthquake Spectra, 21(3), 685–713.
International Conference of Building Officials (ICBO). (1997). Uniform Building Code, ICBO, Whittier, CA.
Luco, N., and Bazzurro, P. (2007). “Does amplitude scaling of ground motion records result in biased nonlinear structural drift responses?” Earthquake Eng. Struct. Dyn., 36(13), 1813–1835.
McGuire, R. K. (1995). “Probabilistic seismic hazard analysis and design earthquakes: Closing the loop.” Bull. Seismol. Soc. Am., 85(5), 1275–1284.
Pacific Earthquake Engineering Research Center (PEER). (2008). “PEER NGA database flatfile.” 〈http://peer.berkeley.edu/nga/flatfile.html〉 (Sep. 16, 2008).
Shome, N., Cornell, C. A., Bazzurro, P., and Carballo, J. E. (1998). “Earthquakes, records, and nonlinear responses.” Earthquake Spectra, 14(3), 469–500.
Somerville, P., Smith, N., Punyamurthula, S., and Sun, J. (1997). “Development of ground motion time histories for phase 2 of the FEMA/SAC steel project.” Rep. SAC/BD-97/04, SAC Joint Venture, Sacramento, CA.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Sep 16, 2008
Accepted: Nov 4, 2009
Published online: Nov 13, 2009
Published in print: Mar 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.