Probabilistic Seismic Loss Assessment of a Vancouver High-Rise Building
Publication: Journal of Structural Engineering
Volume 136, Issue 3
Abstract
A seismic loss curve of a real-world building is obtained by means of state-of-the-art models for the impending ground motion, the structure, the damage of structural and nonstructural components, and the ensuing losses. In particular, the seismic hazard at the building’s location (Vancouver, Canada) is described by a comprehensive probabilistic model. It is argued that this ground motion model is particularly appropriate in reliability analysis compared with the more common utilization of a limited set of scaled ground motions. In this paper the probabilistic integrals are carried out by means of a reliability formulation, in which a series of probabilistic models enter. This is referred to as unified reliability analysis to contrast the unified format of the probabilistic models with alternatives, such as suites of ground motions and fragility curves that themselves are created by reliability analysis. A key contribution in this paper is the comprehensive numerical example, which entails an inelastic dynamic analysis of a finite-element model of a building located in Vancouver.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was conducted under the support of the first writer’s Canada Graduate Scholarship from the Natural Sciences and Engineering Research Council of Canada, which is gratefully acknowledged. The writers thank Dr. Carlos Ventura for drawings and other information related to the high-rise building that was analyzed, and Dr. Gail Atkinson for enlightening discussions on ground motion simulation and the EXSIM program employed to simulate subduction ground motions based on finite-fault model.NSERC
References
Adams, J. (1990). “Paleoseismicity of the Cascadia subduction zone—Evidence from the turbidities off the Oregon-Washington margin.” Tectonics, 9(4), 569–583.
Adams, J., and Halchuk, S. (2003). Fourth generation seismic hazard maps of Canada: Values for over 650 Canadian localities intended for the 2005 National Building Code of Canada. Open File 4459, Geological Survey of Canada, Ottawa.
Amin, M., and Ang, A. H. S. (1968). “Nonstationary stochastic model of earthquake motions.” J. Engrg. Mech. Div., 94(EM2), 559–583.
Atkinson, G. M. (1995). “Attenuation and source parameters of earthquakes in the Cascadia region.” Bull. Seismol. Soc. Am., 85(5), 1327–1342.
Atkinson, G. M. (1996). “The high-frequency shape of the source spectrum for earthquakes in eastern and western Canada.” Bull. Seismol. Soc. Am., 86(1), 106–112.
Atkinson, G. M. (2005). “Ground motions for earthquakes in south-western British Columbia and north-western Washington: Crustal, In-slab, and offshore events.” Bull. Seismol. Soc. Am., 95(3), 1027–1044.
Atkinson, G. M., and Boore, D. M. (1997). “Stochastic point-source modeling of ground motions in the Cascadia region.” Seismol. Res. Lett., 68(1), 74–85.
Atkinson, G. M., and Boore, D. M. (2003). “Empirical ground-motion relations for subduction-zone earthquakes and their application to Cascadia and other regions.” Bull. Seismol. Soc. Am., 93(4), 1703–1729.
Atkinson, G. M., and Silva, W. (2000). “Stochastic modelling of California ground motions.” Bull. Seismol. Soc. Am., 90(2), 255–274.
Beresnev, I. A., and Atkinson, G. M. (1997). “Modeling finite-fault radiation from the omega-n spectrum.” Bull. Seismol. Soc. Am., 87(1), 67–84.
Beresnev, I. A., and Atkinson, G. M. (2002). “Source parameters of earthquakes in eastern and western North America based on finite-fault modeling.” Bull. Seismol. Soc. Am., 92(2), 695–710.
Boore, D. M. (1983). “Stochastic simulation of high-frequency ground motions based on seismological models of the radiated spectra.” Bull. Seismol. Soc. Am., 73(6), 1865–1894.
Boore, D. M. (2003). “Simulation of ground motion using stochastic method.” Pure Appl. Geophys., 160, 635–676.
Conte, J. P., and Peng, B. -F. (1997). “Fully nonstationary analytical earthquake ground motion model.” J. Eng. Mech., 123(1), 15–24.
Der Kiureghian, A., and Crempien, J. (1989). “Evolutionary model for earthquake ground motion.” Struct. Safety, 6(2–4), 235–246.
Ditlevsen, O., and Madsen, H. O. (1996). Structural reliability methods, Wiley, New York.
Fan, F. G., and Ahmadi, G. (1990). “Nonstationary Kanai-Tajimi models for El Centro 1940 and Mexico City 1985 earthquakes.” Probab. Eng. Mech., 5(4), 171–181.
Ferritto, J. M. (1984). “Economics for seismic design for new buildings.” J. Struct. Eng., 110(12), 2925–2938.
Foschi, R. O., and Lo, R. C. (1988). “EQPROB: A PC-based, graphics-assisted program for seismic risk analysis.” Proc., 3rd Int. Conf. on Computing in Civil Engineering, Canadian Society of Civil Engineers, Vancouver, Canada.
Hanks, T. C., and Kanamori, H. (1979). “A moment magnitude scale.” J. Geophys. Res., 84(B5), 2348–2350.
Haukaas, T. (2008). “Unified reliability and design optimization for earthquake engineering.” Probab. Eng. Mech., 23(4), 471–481.
Hyndman, R. D., and Wang, K. (1995). “The rupture zone of Cascadia great earthquakes from current deformation and thermal regime.” J. Geophys. Res., 100(B11), 22133–22154.
Iyengar, R. N., and Iyengar, K. T. S. R. (1969). “A nonstationary random process model for earthquake accelerograms.” Bull. Seismol. Soc. Am., 59(3), 1163–1188.
Koduru, S. D. (2008). “Performance-based earthquake engineering with the first-order reliability method.” Ph.D. dissertation, Univ. of British Columbia, B.C., Canada.
Koduru, S. D., and Haukaas, T. (2007). “Seismic reliability analysis with probabilistic models for ground motion and structure.” Proc., COMPDYN ’07: ECCOMAS Thematic Conf. on Computational Methods in Structural Dynamics and Earthquake Engineering, European Community on Computational Methods in Applied Sciences (ECCOMAS), Rethymno, Crete, Greece.
Kramer, S. L. (1996). Geotechnical earthquake engineering, Prentice-Hall, Upper Saddle River, N.J.
Li, C. C., and Der Kiureghian, A. (1995). “Mean out crossing rate of nonlinear response to stochastic input.” Proc., 7th Int. Conf. on Applications of Statistics and Probability in Civil Engineering, Balkema, Rotterdam, The Netherlands.
Lin, Y. K., and Yong, Y. (1987). “Evolutionary Kanai-Tajimi earthquake models.” J. Eng. Mech., 113(8), 1119–1137.
McKenna, F., Fenves, G. L., and Scott, M. H. (2004). OpenSees: Open system for earthquake engineering simulation, Pacific Earthquake Engineering Research Center, University of California, Berkeley, Calif.
Mehanny, S. S., and Deierlein, G. G. (2000). “Modeling of assessment of seismic performance of composite frames with reinforced concrete columns and steel beams.” John A. Blume Earthquake Engineering Center Rep. No. 135, Dept. of Civil and Environmental Engineering, Stanford Univ., Stanford, Calif.
Moehle, J., Stojadinovic, B., Der Kiureghian, A., and Yang, T. Y. (2005). An application of PEER performance-based earthquake engineering methodology. Research digest No. 2005-1, Pacific Earthquake Engineering Research Center, University of California, Berkeley, Calif.
Motazedian, D., and Atkinson, G. M. (2005). “Stochastic finite-fault modeling based on a dynamic corner frequency.” Bull. Seismol. Soc. Am., 95, 995–1010.
NBCC. (2005). National building code of Canada, National Research Council of Canada, Ottawa.
Porter, K. A., Kiremidjian, A. S., and LeGrue, J. S. (2001). “Assembly-based vulnerability of buildings and its use in performance evaluation.” Earthquake Spectra, 17(2), 291–312.
Sabetta, F., and Pugliese, A. (1996). “Estimation of response spectra and simulation of nonstationary earthquake ground motions.” Bull. Seismol. Soc. Am., 86(2), 337–352.
Saragoni, G. R., and Hart, G. C. (1973). “Simulation of artificial earthquakes.” International Journal of Earthquake Engineering and Structural Dynamics, 2(3), 249–267.
Sexsmith, R. G. (1983). Bridge risk assessment and protective design for ship collision: Introductory report, IABSE, Zurich.
Thráinsson, H., and Kiremidjian, A. S. (2002). “Simulation of digital earthquake accelerograms using the inverse discrete Fourier transform.” Earthquake Eng. Struct. Dyn., 31, 2023–2048.
Ventura, C. E., Onur, T., and Hao, K. X.-S. (2004). “Site period estimations in the Fraser river delta using micrometer measurements—Experimental and analytical studies.” Proc., 13th World Conf. on Earthquake Engineering, Int'l Association of Earthquake Engineering, Vancouver, Canada.
Yang, T. Y. (2006). “Performance evaluation of innovative steel braced frames.” Ph.D. dissertation, Univ. of California, Berkeley, Calif.
Yeh, C. H., and Wen, Y. K. (1990). “Modeling of nonstationary ground motion and analysis of inelastic structural response.” Struct. Safety, 8(1–4), 281–298.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Apr 11, 2008
Accepted: Aug 31, 2009
Published online: Sep 2, 2009
Published in print: Mar 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.