Chemical-Bonded Anchor Bolts versus Traditional J and T Anchor Bolts Used in Machine Foundations
Publication: Practice Periodical on Structural Design and Construction
Volume 25, Issue 2
Abstract
Heavy machinery that undergoes significant impact in its lifetime requires support and a system that can resist dynamic forces and the resulting vibrations. In this context, this technical paper reports a case study on a machine featuring hydraulic steel sheet shears and two hammers. The machine foundation of the hydraulic steel sheet shears was fixed to a concrete foundation using chemically bonded anchor bolts of a certain length and diameter. A short time after the machine had begun operating, shear failure of the anchor bolts occurred. These chemically bonded anchor bolts were then replaced with T-shaped anchor bolts of the same length and diameter, which functioned well. Two hammers were fixed in cast using J-shaped anchor bolts. The J- and T-shaped anchor bolts functioned well in the machine for over 10 years. From field studies and years of successful construction practices, traditional J- and T-shaped anchor bolts fixed with reinforcement of concrete foundations are recommended for fixing machines with impact loads and are superior to chemically bonded anchor bolts.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This research was technically supported by the main workshops of Egyptian Copper Works.
References
ACI (American Concrete Institute). 2004. Foundations for dynamic equipment. ACI 351.3R. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2013. Code requirements for nuclear safety related concrete related concrete structures. ACI 349. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2014. Building code requirements for structural concrete and commentary. ACI 318-14. Farmington Hills, MI: ACI.
AISC. 2005. Specification for structural steel buildings. Chicago: AISC.
ASTM. 1981. Standard test method for resistance to degradation of small-size coarse aggregate by abrasion and impact in the Los Angeles machine. ASTM C131. West Conshohocken, PA: ASTM.
ASTM. 1982. Standard specification for chemical admixtures for concrete. ASTM C494. West Conshohocken, PA: ASTM.
ASTM. 1984. Standard specification for concrete aggregates. ASTM C33. West Conshohocken, PA: ASTM.
ASTM. 2007. Standard specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength. ASTM F1554. West Conshohocken, PA: ASTM.
Barkan, D. D. 1962. Dynamics of bases and foundations. New York: McGraw-Hill Book.
Genusu, T., C. Ruiseng, and Z. Lei. 2017. “GenModels to predict shear resistances of anchor bolts.” Adv. Struct. Eng. J. 20 (12): 1933–1947.
Hariyadi, S. Munemoto, and Y. Sonoda. 2017. “Experimental analysis of anchor bolt in concrete under the pull-out loading.” Procedia Eng. 171: 926–933. https://doi.org/10.1016/j.proeng.2017.01.391.
James, M., and A. Lawrence. 2006. Steel design guides: Base plate and anchor rod design. 2nd ed. Chicago: AISC.
Kim, M. K., and I. K. Choi. 2012. “Evaluate a failure capacity of an anchor foundation in the case of a seismic event by shaking table test.” In Proc., 15th World Conference on Earthquake Engineering (15WCEE). Lisbon, Portugal: Sociedade Portuguesa de Engenharia Sismica (SPES).
Mohamad, H. O., I. Luqmanalhakim, T. Hannifah, A. A. Nor, and S. Salman. 2016. “Anchor bolt position in base plate in terms of T and J anchor bolt.” In Vol. 97 of Proc., MATEC Web of Conf., Engineering Technology International Conference (ETIC). Les Ulis, France: EDP Sciences. https://doi.org/10.1051/matecconf/20179701110.
Nan-Ho, L., M. Hwan, and J. In-Soo. 2001. “Failure mechanism for large-sized grouted anchor bolt under tensile load.” In Proc., Transactions SMIRT 16. Washington, DC: International & American Associations for Structural Mechanics in Reactor Technology.
Srinivasulu, P., and C. V. Vadidyanathan. 1980. Machine foundations. New Delhi, India: TATA McGraw-Hill.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Apr 10, 2019
Accepted: Oct 30, 2019
Published online: Mar 9, 2020
Published in print: May 1, 2020
Discussion open until: Aug 9, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.