Comparative Energy Analysis and Life-Cycle Assessment of Innovative Residential Wall Systems in Cold Regions
Publication: Practice Periodical on Structural Design and Construction
Volume 24, Issue 3
Abstract
This research mainly focused on energy simulation for residential buildings with different types of wall systems in Boston. Building-envelope systems have a significant influence on the whole building’s energy performance, and therefore quantitative comparisons are of interest. In this study, several types of high-performance wall systems, including advanced framing, structural insulated panels, insulated concrete forms, and the exterior insulation and finish system, as well as the most common wood-stud wall system, were studied with the use of building energy simulation. The results show that all of these types of wall systems effectively reduce the annual energy consumption, and the insulated concrete form is the best-performing method and has annual energy savings of 8.94% compared with the standard 50.8 × 101.6 mm (2 × 4 in.) wood-frame wall in Boston. The results also validate the anti-insulation effect at Philadelphia and Syracuse, which means that in some cases, increasing the insulation beyond a certain level may actually increase the use of energy for cooling. A life-cycle assessment was also performed, and the results show that the insulated concrete form wall system with a 152.4-mm (6-in.) concrete core has the best long-term energy performance, with overall life-cycle savings of 8%.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported by the Pennsylvania Housing Research Center (PHRC).
References
ACME Panel. n.d. “Available size chart with pricing.” Accessed April 23, 2018. http://www.acmepanel.com/sip-prices.asp.
Aldawi, F., A. Date, F. Alam, I. Khan, and M. Alghamdi. 2013. “Energy efficient residential house wall system.” Appl. Therm. Eng. 58 (1–2): 400–410. https://doi.org/10.1016/j.applthermaleng.2013.02.023.
Amvic. n.d. “Amvic insulated concrete forms (ICF).” Accessed April 23, 2018. https://www.amvicsystem.com/insulated-concrete-forms/.
Building Science Corporation. n.d. “ETW: Wall-ICF wall construction.” Accessed April 22, 2018. https://buildingscience.com/documents/enclosures-that-work/high-r-value-wall-assemblies/high-r-wall-icf-wall-construction/.
Chasar, D., N. Moyer, A. F. Rudd, D. Parker, and S. Chandra. 2002. “Measured and simulated cooling performance comparison: Insulated concrete form versus frame construction.” In Proc., ACEEE 2002 Summer Study. Washington, DC: American Council for an Energy-Efficient Economy.
Chen, W., and H. Hao. 2015. “Performance of structural insulated panels with rigid skins subjected to windborne debris impacts—Experimental investigations.” Constr. Build. Mater. 77: 241–252. https://doi.org/10.1016/j.conbuildmat.2014.12.112.
Chinnayeluka, S. R. 2011. “Performance assessment of innovative framing systems through building information modeling based energy simulation.” M.S. thesis, Dept. of Construction Management, Louisiana State Univ. and Agricultural and Mechanical College.
Common Sense Home. n.d. “ICF construction—What you need to know about an ICF home.” Accessed April 23, 2018. https://commonsensehome.com/icf-construction/.
de Angelis, E., and E. Serra. 2014. “Light steel-frame walls: Thermal insulation performances and thermal bridges.” Energy Procedia 45: 362–371. https://doi.org/10.1016/j.egypro.2014.01.039.
Dixit, M. K., J. L. Fernández-Solís, S. Lavy, and C. H. Culp. 2012. “Need for an embodied energy measurement protocol for buildings: A review paper.” Renewable Sustainable Energy Rev. 16 (6): 3730–3743. https://doi.org/10.1016/j.rser.2012.03.021.
EIMA (EIFS Industry Members Association). n.d. “About EIFS.” Accessed April 22, 2018. http://www.eima.com/eifs/.
Gajda, J. 2001. Energy use of single-family houses with various exterior walls. Rep. No. PCA CD026. Skokie, IL: Portland Cement Association.
Hart, R., V. Mendon, and T. Taylor. 2014. Residential wall type energy impact analysis. Technical Rep. Prepared for Florida Masonry Apprentice & Educational Foundation. Richland, WA: Pacific Northwest National Laboratory.
Havel, G. 2008. “Construction concerns: Exterior insulation finishing system.” Fire Engineering. Accessed April 22, 2018. http://www.fireengineering.com/articles/2008/08/construction-concerns-exterior-insulation-finishing-system.html/.
Ibrahim, M., E. Wurtz, P. H. Biwole, and P. Achard. 2016. “Performance evaluation of buildings with advanced thermal insulation system: A numerical study.” J. Facade Des. Eng. 4 (1–2): 19–34. https://doi.org/10.3233/FDE-160048.
Idris, Y. M., and M. Mae. 2017. “Anti-insulation mitigation by altering the envelope layers’ configuration.” Energy Build. 141: 186–204. https://doi.org/10.1016/j.enbuild.2017.02.025.
Kosny, J., D. Yarbrough, P. Childs, and S. Mohiuddin. 2007. “How the same wall can have several different R-values: Relations between amount of framing and overall thermal performance in wood and steel-framed walls.” In Proc., Thermal Performance of the Exterior Envelopes of Buildings X. Atlanta: ASHRAE.
Lstiburek, J. 2010. “BSI-030: Advanced framing.” Building Science Corporation. Accessed April 10, 2018. https://buildingscience.com/documents/insights/bsi-030-advanced-framing/.
Mahattanatawe, P., C. Puvanant, and D. Mongkolsawat. 2006. “The energy performance of the cold-formed steel-frame and wood-frame houses developed for Thailand.” Accessed April 12, 2018. http://ibpsa-usa.org/index.php/ibpusa/article/view/208/.
Masoso, O. T., and L. J. Grobler. 2008. “A new and innovative look at anti-insulation behaviour in building energy consumption.” Energy Build. 40 (10): 1889–1894. https://doi.org/10.1016/j.enbuild.2008.04.013.
Moynihan, A. E. 2014. “Tools for designing with and evaluating the benefits of structural insulated panels.” M.S. thesis, Univ. of Massachusetts Amherst.
Mullens, M. A., and M. Arif. 2006. “Structural insulated panels: Impact on the residential construction process.” J. Constr. Eng. Manage. 132 (7): 786–794. https://doi.org/10.1061/(ASCE)0733-9364(2006)132:7(786).
NAHB (National Association of Home Builders). 2013. “Spaces in new homes.” Accessed April 22, 2018. https://www.nahb.org/en/research/housing-economics/special-studies/spaces-in-new-homes-2013.aspx/.
Pierquet, P., J. L. Bowyer, and P. H. Huelman. 1998. “Thermal performance and embodied energy of cold climate wall systems.” Forest Prod. J. 48 (6): 53–60.
Sartori, I., and A. G. Hestnes. 2007. “Energy use in the life cycle of conventional and low-energy buildings: A review article.” Energy Build. 39 (3): 249–257. https://doi.org/10.1016/j.enbuild.2006.07.001.
US Census Bureau. 2016. “Characteristics of new housing.” Accessed April 9, 2019. https://www.census.gov/construction/chars/.
US Energy Information Administration. 2012. “Annual energy review 2011.” Accessed April 11, 2018. https://www.eia.gov/totalenergy/data/annual/archive/038411.pdf/.
Information & Authors
Information
Published In
Copyright
© 2019 American Society of Civil Engineers.
History
Received: Oct 23, 2018
Accepted: Feb 19, 2019
Published online: May 7, 2019
Published in print: Aug 1, 2019
Discussion open until: Oct 7, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.