Finite-Element Analysis of Cantilever Slab Deflections with ANSYS SOLID65 3D Reinforced-Concrete Element with Cracking and Crushing Capabilities
Publication: Practice Periodical on Structural Design and Construction
Volume 24, Issue 1
Abstract
This paper presents a finite-element (FE) study conducted to investigate the deflections of newly constructed cantilevered slabs built for a medical facility expansion. From the beginning of the construction stage, the deflections of the newly built cantilevers caused disputes among the owner, contractor, and the structural engineer of record. The study presented here was performed to understand whether the cantilevers were designed and built to conform to the governing codes. The cantilever deflections at three levels and their relative displacements were studied in detail for comparison with the measured values at the job site and code limitations. The mainstream structural engineering software programs predominantly used in structural engineering offices are generally run to identify the most critical load combinations, critical forces, moments, and deflections of structural members; however, a deflection study such as the one described here requires an extensive FE model created with comprehensive software like ANSYS to investigate the sequential loading of cantilever deflections. In ANSYS, the reinforced concrete behavior can be simulated with SOLID65 elements, which provide an excellent fit for representing the true stress–strain diagram of reinforced concrete. The FE modeling with ANSYS SOLID65 elements for flat slab cantilever deflections have not been discussed in detail in a technical publication before: This study fills that gap. The study not only covers the detailed FE modeling with SOLID65 elements, but it also compares the results with the measured deflections and code requirements. In addition, the study provides recommendations for avoiding excessive deflections in cantilevered reinforced concrete construction.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aalami, B. O. 2005. “Structural modeling and analysis of concrete floor slabs.” Concr. Int. 27 (12): 39–43.
American Concrete Institute (ACI). 2008. Building code requirements for structural concrete and commentary. ACI 318-08. Farmington Hills, MI: ACI.
Al-Smadi, Y. M., A. Bhargava, O. Avci, and M. Elmorsi. 2012. “Design of experiments study to obtain a robust 3D computational bridge model.” In Vol. 1 of Proc., Conf. of Society for Experimental Mechanics Series: Topics on the Dynamics of Civil Structures, edited by B. Antoun, H. J. Qi, R. Hall, G. P. Tandon, H. Lu, C. Lu, J. Furmanski, and A. Amirkhizi, 287–297. New York: Springer.
ANSYS. 2013. ANSYS mechanical APDL theory reference. Canonsburg, PA: ANSYS.
Avci, O. 2005. “Effects of bottom chord extensions on the static and dynamic performance of steel joist supported floors.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Virginia Polytechnic Institute and State Univ.
Avci, O. 2012. “Retrofitting steel joist supported footbridges for improved vibration response.” In Structures Congress 2012, edited by J. Carrato, and J. Burns, 460–470. Reston, VA: ASCE.
Avci, O., and Y. M. Al-Smadi. 2019. “Unreinforced masonry façade assessment of a historic building for excessive displacements due to a nearby subway construction.” Pract. Period. Struct. Des. Constr. 24 (1): 05018005. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000399.
Avci, O., A. Bhargava, Y. Al-Smadi, and J. Isenberg. 2018. “Vibrations serviceability of a medical facility floor for sensitive equipment replacement: evaluation with sparse in-situ data.” Pract. Period. Struct. Des. Constr. 24 (1): 05018006. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000404.
Avci, O., D. B. Davis, and T. M. Murray. 2006. Effects of bottom chord extensions on the static stiffness of joists. Rep. No. CE/VPI-ST-06/01. Blacksburg, Virginia: Virginia Polytechnic Institute and State Univ.
Avci, O., and W. S. Easterling. 2002. “Web crippling strength of multi-web steel deck sections subjected to end one flange loading.” In Proc., 16th Int. Specialty Conf. on Cold-Formed Steel Structures: Recent Research and Developments in Cold-Formed Steel Design and Construction, edited by R. A. LaBoube, and W. W. Yu, 187–199. Rolla, MO: Dept. of Civil Engineering Center for Cold-Formed Steel Structures, Univ. of Missouri–Rolla.
Avci, O., and W. S. Easterling. 2003a. Metal Construction Association (MCA) diaphragm strength and stiffness. Rep. No. CE/VPI-ST 03/07. Blacksburg, Virginia: Virginia Polytechnic Institute and State Univ.
Avci, O., and W. S. Easterling. 2003b. Strength of welded weak position shear studs. Rep. No. CE/VPI-ST 03/08. Blacksburg, Virginia: Virginia Polytechnic Institute and State Univ.
Avci, O., and W. S. Easterling. 2004. “Web crippling strength of steel deck subjected to end one flange loading.” J. Struct. Eng. 130 (5): 697–707. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:5(697).
Avci, O., L. D. Luttrell, J. Mattingly, and W. S. Easterling. 2016. “Diaphragm shear strength and stiffness of aluminum roof panel assemblies.” Thin Walled Struct. 106 (Sep): 51–60. https://doi.org/10.1016/j.tws.2016.04.019.
Avci, O., J. Mattingly, L. D. Luttrell, and S. W. Easterling, 2004a. “Roof diaphragm strength and stiffness.” In Proc., 17th Int. Specialty Conf. on Cold-Formed Steel Structures: Recent Research and Developments in Cold-Formed Steel Design and Construction, edited by R. A. LaBoube, and W. W. Yu, 679–693. Rolla, MO: Dept. of Civil Engineering Center for Cold-Formed Steel Structures, Univ. of Missouri–Rolla.
Avci, O., and T. M. Murray. 2012. “Effect of bottom chord extensions on the static flexural stiffness of open-web steel joists.” J. Perform. Constr. Facil. 26 (5): 620–632. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000262.
Avci, O., M. Seek, W. S. Easterling, and T. M. Murray. 2004b. ASTM E-1592 tests Package Industries, Inc. LSR Roof System with ½ in. and 1 ½ in. Standoff Clips. Rep. No. CE/VPI-ST 04/04. Blacksburg, VA: Virginia Polytechnic Institute and State Univ.
Bailey, C. G. 2001. “Membrane action of unrestrained lightly reinforced concrete slabs at large displacements.” Eng. Struct. 23 (5): 470–483. https://doi.org/10.1016/S0141-0296(00)00064-X.
Bailey, C. G., and W. S. Toh. 2007. “Behaviour of concrete floor slabs at ambient and elevated temperatures.” Fire Saf. J. 42 (6–7): 425–436. https://doi.org/10.1016/j.firesaf.2006.11.009.
Bhargava, A., J. Isenberg, P. H. Feenstra, Y. Al-Smadi, and O. Avci. 2013. “Vibrations assessment of a hospital floor for a magnetic resonance imaging unit (MRI) replacement.” In Structures Congress 2013: Bridging your passion with your profession, 2433–2444. Reston, VA: ASCE.
Choi, B. S., A. Scanlon, and P. A. Johnson. 2004. “Monte Carlo simulation of immediate and time-dependent deflections of reinforced concrete beams and slabs.” Struct. J. 101 (5): 633–641.
Canadian Standards Association (CSA). 2014. Design of concrete structures. CSA-A23.3-04. Mississauga, ON, Canada: CSA.
Dahmani, L., A. Khennane, and S. Kaci. 2010. “Crack identification in reinforced concrete beams using ANSYS software.” Strength of Materials. 42 (2): 232–240. https://doi.org/10.1007/s11223-010-9212-6.
Elstner, R., and E. Hognestad. 1956. “Shearing strength of reinforced concrete slabs.” ACI J. Proc. 53 (7): 29–58.
Filippou, F. C. 1990. “Finite element analysis of reinforced concrete structures.” Matrix 14 (Nov): 717–725.
Foster, S. J., C. G. Bailey, I. W. Burgess, and R. J. Plank. 2004. “Experimental behaviour of concrete floor slabs at large displacements.” Eng. Struct. 26 (9): 1231–1247. https://doi.org/10.1016/j.engstruct.2004.04.002.
Ge, J. P., and Z. H. Zong, 2004. “Nonlinear analysis of rectangular concrete-filled tubular column to steel beam connections with sided plates.” In Vols. 1 and 2 of Proc., 8th Int. Symp. on Structural Engineering for Young Experts. Xi’an, China: ISSEYE.
Gholamhoseini, A., I. Gilbert, and M. Bradford. 2014. “Time-dependent deflection of composite concrete slabs: A simplified design approach.” Aust. J. Struct. Eng. 15 (3): 287–298. https://doi.org/10.7158/13287982.2014.11465165.
Gilbert, R. I. 2013. “Time-dependent stiffness of cracked reinforced and composite concrete slabs.” Procedia Eng. 57: 19–34. https://doi.org/10.1016/j.proeng.2013.04.006.
Gilbert, R. I., and G. Ranzi. 2011. Time-dependent behaviour of concrete structures. London: CRC Press.
Gilbert, R. I., and R. F. Warner. 1978. “Tension-stiffening in reinforced concrete slabs.” J. Struct. Div. 104 (12): 1885–1900.
Gouverneur, D., R. Caspeele, and L. Taerwe. 2013. “Experimental investigation of the load–displacement behaviour under catenary action in a restrained reinforced concrete slab strip.” Eng. Struct. 49 (Apr): 1007–1016. https://doi.org/10.1016/j.engstruct.2012.12.045.
Guo, Z. 2014. Principles of reinforced concrete. Oxford, UK: Elsevier.
Hanna, A. S., and A. B. Senouci. 1995. “Design optimization of concrete-slab forms.” J. Constr. Eng. Manage. 121 (2): 215–221. https://doi.org/10.1061/(ASCE)0733-9364(1995)121:2(215).
Jendele, L., and J. Cervenka. 2006. “Finite element modelling of reinforcement with bond.” Comput. Struct. 84 (28): 1780–1791. https://doi.org/10.1016/j.compstruc.2006.04.010.
Jiang, J., and F. A. Mirza. 1997. “Nonlinear analysis of reinforced concrete slabs by a discrete finite element approach.” Comput. Struct. 65 (4): 585–592. https://doi.org/10.1016/S0045-7949(94)E0269-8.
Jofriet, J. C., and G. M. McNeice. 1971. “Finite element analysis of reinforced concrete slabs.” J. Struct. Div. 97 (3): 785–806.
Kaewunruen, S., and A. M. Remennikov. 2008. “Effect of a large asymmetrical wheel burden on flexural response and failure of railway concrete sleepers in track systems.” Eng. Fail. Anal. 15 (8): 1065–1075. https://doi.org/10.1016/j.engfailanal.2007.11.013.
Kwak, H.-G., and F. C. Filippou. 1990. Finite element analysis of reinforced concrete structures under monotonic loads. Rep. No. UCB/SEMM-90/14. Berleley, CA: Dept. of Civil Engineering, Univ. of California.
Léger, P., and P. Paultre. 1993. “Microcomputer analysis of reinforced concrete slab systems.” Can. J. Civ. Eng. 20 (4): 587–601. https://doi.org/10.1139/l93-076.
Lewiński, P. M., and W. Wojewódzki. 1991. “Integrated finite element model for reinforced concrete slabs.” J. Struct. Eng. 117 (4): 1017–1038. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:4(1017).
Lin, Z., and Y. Zhang. 2011. “Nonlinear analysis on steel–concrete composite open-web plate.” In Proc., 2011 Int. Conf. on Electric Technology and Civil Engineering, ICETCE 2011, 2392–2395. Piscataway, NJ: IEEE.
Lu, X., and J. Jiang. 2003. “Analysis for concrete structure under complex stress condition with Solid 65 FEA element in ANSYS.” Build. Struct. 33 (6): 22–24.
Ma, T., H. Yu, Z. Zhou, W. Yang, Z. Zhang, and J. Min. 2017. “Finite element analysis on the concrete damage of cross-formation perforation upon ANSYS/LS-DYNA.” Key Eng. Mater. 723: 764–769. https://doi.org/10.4028/www.scientific.net/KEM.723.764.
Marzouk, H. M., and Z. W. Chen. 1993. “Finite element analysis of high-strength concrete slabs.” Struct. J. 90 (5): 505–513.
Musmar, M. A., M. I. Rjoub, and M. A. Abdel Hadi. 2014. “Nonlinear finite element analysis of shallow reinforced concrete beams using SOLID65 element.” ARPN J. Eng. Appl. Sci. 9 (2): 85–89.
National Research Council of Canada (NRC). 1995. National building code of Canada. Ottawa, ON: NRC.
Phuvoravan, K., and E. D. Sotelino. 2005. “Nonlinear finite element for reinforced concrete slabs.” J. Struct. Eng. 131 (4): 643–649. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:4(643).
Qinghua, S. B. S. Z. A. 2007. “Application of SOLID65 element in the finite element analysis of concrete structures.” Ind. Constr. 1 (23): 87–92.
Radnić, J., and D. Matešan. 2008. “Experimental testing of reinforced concrete slab behaviour under long-term load.” Materialwiss. Werkstofftech. 39 (2): 157–161. https://doi.org/10.1002/mawe.200700261.
Scanlon, A., and B. Suprenant. 2011. “Estimating Two-Way Slab Deflections.” Concr. Int. 33 (7): 29–34.
Seek, M., O. Avci, and T. M. Murray. 2003. Gravity loading base tests using whirlwind standing super seam II roof system with 8 in by 2.5 in. Z-Purlins. Blacksburg, VA: Virginia Polytechnic Institute and State Univ.
Shayanfar, M. A., and A. Safiey. 2008. “A new approach for nonlinear finite element analysis of reinforced concrete structures with corroded reinforcements.” Comput. Concr. 5 (2): 155–174. https://doi.org/10.12989/cac.2008.5.2.155.
Song, H.-W., S.-H. Shim, K.-J. Byun, and K. Maekawa. 2002. “Failure analysis of reinforced concrete shell structures using layered shell element with pressure node.” J. Struct. Eng. 128 (5): 655–664. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:5(655).
Tavio, T., and A. Tata. 2009. “Predicting nonlinear behavior and stress-strain relationship of rectangular confined reinforced concrete columns with ANSYS.” Civil Eng. 11 (1): 23–31. https://doi.org/10.9744/ced.11.1.pp.%2023-31.
Thomas, J., and Ramaswamy, A. 2006. “Nonlinear analysis of shear dominant prestressed concrete beams using ANSYS.” In Proc., Int. ANSYS Conf.
Vollum, R. L., and N. Afshar. 2009. “Influence of construction loading on deflections in reinforced concrete slabs.” Mag. Concr. Res. 61 (1): 3–14. https://doi.org/10.1680/macr.2009.61.1.3.
Wang, T., and T. T. C. Hsu. 2001. “Nonlinear finite element analysis of concrete structures using new constitutive models.” Comput. Struct. 79 (32): 2781–2791. https://doi.org/10.1016/S0045-7949(01)00157-2.
Wang, W., and S. Teng. 2008. “Finite-element analysis of reinforced concrete flat plate structures by layered shell element.” J. Struct. Eng. 134 (12): 1862–1872. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:12(1862).
Xu, G., and B. R. Ellingwood. 2011. “An energy-based partial pushdown analysis procedure for assessment of disproportionate collapse potential.” J. Constr. Steel Res. 67 (3): 547–555. https://doi.org/10.1016/j.jcsr.2010.09.001.
Yitzhaki, D. 1966. “Punching strength of reinforced concrete slabs.” ACI J. Proc. 63 (5): 527–542.
Zhang, H.-Z., X. Liu, W.-J. Yi, and X. Liu. 2014. “Reinforcement layout optimization of members under complex stress states and multiple loading cases.” Hunan Daxue Xuebao/J. Hunan Univ. Nat. Sci. 41 (9): 42–47.
Zhang, Y. X., M. A. Bradford, and R. I. Gilbert. 2007. “A layered shear-flexural plate/shell element using Timoshenko beam functions for nonlinear analysis of reinforced concrete plates.” Finite Elem. Anal. Des. 43 (11–12): 888–900. https://doi.org/10.1016/j.finel.2007.05.002.
Information & Authors
Information
Published In
Copyright
© 2018 American Society of Civil Engineers.
History
Received: Apr 11, 2018
Accepted: Sep 24, 2018
Published online: Dec 5, 2018
Published in print: Feb 1, 2019
Discussion open until: May 5, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.