Abstract
This paper reviews the suitability and use of post-tensioned grouted anchors to replace and/or retrofit existing Tainter gate anchorage systems. A thorough historical and theoretical review on both unbonded and bonded anchor systems was performed, a discussion is presented on the structural mechanisms by which the anchorage systems resist forces and maintain equilibrium. A review of bond mechanics is provided along with an example problem in which the two staggered anchorage patterns (Condition 1 and Condition 2) were inputted into multiple finite-element analysis (FEA) models with an assumed effective bond length and subjected to jacking load conditions. An elastic analysis was conducted for all models showcasing the peak principal stresses that developed between adjacent anchors, along with observations and comparisons between the two anchorage patterns. In addition, theoretical design concepts and example projects to retrofit existing anchorage systems are discussed along with recommendations for corrosion protection, drilling, and drilling tolerances.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The author thanks David DePolo, P.E.; Mike McCray, P.G.; and Nicolas Jeung, F.E. of the COE for their encouragement and review of this paper.
References
AASHTO. 2014. AASHTO LRFD bridge design specifications. 7th Ed. Washington, DC: AASHTO.
Abela, C. M. 2014. “Comparison of retrofits for three strut-arm Tainter gates using a longevity corrosion maintenance factor.” Pract. Period. Struct. Des. Constr. 19 (4): 04014017. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000215.
Abela, C. M. 2018. “Evaluating existing passive anchorage systems for Tainter gates.” Pract. Period. Struct. Des. Constr. 23 (1): 04017032. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000351.
Abela, C. M., and A. A. Abela. 2015. “Evaluation of an existing steel box trunnion girder and its posttensioned anchors before liftoff testing: Case study.” Pract. Period. Struct. Des. Constr. 20 (4): 04014052. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000252.
ACI (American Concrete Institute). 2003. Bond and development of straight reinforcing bars in tension. ACI 408R. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2014. Building code requirements for structural concrete. ACI 318-14. Farmington Hills, MI: ACI.
ASTM (American Society for Testing and Materials). 1989. Standard Specification for Steel Bars, Alloy, Standard Grades. ASTM A322. West Conshohocken, PA: ASTM.
ASTM (American Society for Testing and Materials). 2009. Standard Specification for Deformed and Plan Carbon-Steel Bars for Concrete Reinforcement. ASTM A615. West Conshohocken, PA: ASTM.
ASTM (American Society for Testing and Materials). 2012. Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete. ASTM A416. West Conshohocken, PA: ASTM.
ASTM (American Society for Testing and Materials). 2015. Standard Specification for High-Strength Steel Bars for Prestressed Concrete. ASTM A722. West Conshohocken, PA: ASTM.
Cesare, M. A., and J. D. Holt. 2012. “Inspection of trunnion rods at Greenup Dam.” In Proc., 32nd Annual USSD Conf.: Innovative Dam and Levee Design and Construction for Sustainable Water Management, 1237–1248. Denver: US Society on Dams (USSD).
Cesare, M. A., J. D. Holt, and L. J. Guy. 2010. “Integrity testing of post-tensioned steel trunnion rods.” In Proc., 30th Annual USSD Conf.: Innovative Damand Levee Design and Construction for Sustainable Water Management, 391–403. Denver: US Society on Dams (USSD).
Choi, O. C., H. Hadje-Ghaffari, D. Darwin, and S. L. McCabe. 1990. Bond of epoxy-coated reinforcement to concrete: Bar parameters. SM Rep. No. 25. Lawrence, KS: Univ. of Kansas Center for Research.
Clark, A. P. 1946. “Comparative bond efficiency of deformed concrete reinforcing bars.” ACI J. Proc. 43 (11): 381–400. https://doi.org/10.14359/8754.
Clark, A. P. 1949. “Bond of concrete to reinforcing bars.” ACI J. Proc. 46 (11): 161–184. https://doi.org/10.14359/12050.
Cook, R. A., J. L. Burtz, and M. H. Ansley. 2003. Design guidelines and specifications for engineered grouts. Rep. No. BC354 RPWP #48. Tallahassee, FL: Florida DOT.
Curtis, D. D., B. J. Davis, S. Rahman, and R. C. Powell. 2005. “Updated assessment of concrete growth effects on a TVA dam.” 25th Annual USSD Conf., June 6–10.
Krumm, P. 2016. “Wanapum dam repaired using post-tensioning.” Foundation Drilling, January 15–18.
Park, R., and T. Paulay. 1975. Reinforced concrete structures. New York: John Wiley & Sons Inc.
Poiroux, G. V. 2011. “Post-tensioned trunnion anchor rod testing, West Point Dam and R.F. Henry Dam.” In Proc., 31st Annual USSD Conf. on 21st Century Dam Design—Advances and Adaptations, 459–476. Denver: US Society on Dams.
PTI (Post-Tensioning Institute). 2014. Recommendations for prestressed rock and soil anchors. PTI DC35.1-14. Farmington Hills, MI: PTI.
Rehm, G. 1968. The basic principles of the bond between steel and concrete. Translation No. 134. London: Cement and Concrete Association.
Schaaf, D. M. 2012. “Tainter gate trunnion anchorage database of inspections, testing, and incidents.” In Proc., USACE 2012 Locks Maintenance Workshop, US Army COE (USACE), 1–42. Washington, DC: Risk Management Center, Eastern Div.
Steuck, K. P., J. B. K. Pank, M. O. Eberhard, and J. F. Stanton. 2007. Anchorage of large-diameter reinforcing bars grouted into ducts. Rep. No. WA-RD 684.1. Olympia, WA: Washington State DOT.
Subramanian, N., and R. A. Cook. 2004. “Behavior of grouted anchors.” Indian Concr. J. 78 (4): 14–21.
Thompson, M. K., J. O. Jirsa, J. E. Breen, and R. E. Klinger. 2002. Anchorage behavior of headed reinforcement: Literature review. Research Rep. 1855-1. Austin, TX: Texas DOT.
USACE. 1961. Red Rock Reservoir Dam Tainter gate anchorage installation and details. Sheet 76. Washington, DC: USACE.
USACE. 1969. Blue River Reservoir concrete spillway – Tainter gate trunnion anchorage. Sheet 49. Washington, DC: USACE.
USACE. 1994. Rock foundations. EM 1110-2-2908. Washington, DC: USACE.
USACE. 2005. Stability analysis of concrete structures. EM 1110-2-2100. Washington, DC: USACE.
Wight, J. K., and J. G. MacGregor. 2012. Reinforced concrete mechanics and design 6E. Upper Saddle River, NJ: Pearson Education Inc.
Information & Authors
Information
Published In
Copyright
© 2018 American Society of Civil Engineers.
History
Received: Feb 12, 2018
Accepted: Mar 21, 2018
Published online: Jul 12, 2018
Published in print: Nov 1, 2018
Discussion open until: Dec 12, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.