Integrated Bridge Load Rating Allowing Rational Assessment of Foundation Reuse
Publication: Practice Periodical on Structural Design and Construction
Volume 23, Issue 3
Abstract
Reuse of existing bridge foundations has been gaining momentum and acceptance among practitioners in the last few years. Proper characterization of the bridge foundation (embedment, load-carrying capacity, etc.) is necessary for bridge reuse when the original design conditions are changed because of scour, bridge widening, increased loading, or other changes to the structure. This paper presents rational means to analyze existing foundations using a hybrid analytical-numerical method so that reuse can be optimized. An integrated bridge load rating that considers the entire superstructure-substructure system can be established using the proposed method. Performing a quantitative integrated bridge load-rating analysis that considers geotechnical issues and soil-structure interaction for a substructure is essential to prevent functional or catastrophic failure under a live load. A reliable determination of the unknown pile embedment is also a prerequisite for a realistic integrated bridge load rating. The design criteria used when the bridge was originally constructed are important factors in the load rating process. Costly detours, repairs, replacement, or loss of life could be associated with inaccurate embedment estimates or use of criteria incongruous with the original design. The results of case histories show the importance of a realistic assessment of the pile embedment and of using appropriate geotechnical and structural design criteria when calculating the integrated load rating of bridges to advance the consideration of foundation reuse.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The work presented in this paper was based on consulting services performed by the authors for the FDOT. The authors thank the FDOT for their permission to publish the results. Thanks are also due to Scott Hayes and Sara Masters for their help during the preparation of the manuscript.
References
AASHTO. (2002). Standard specifications for highway bridges. 17th ed. Washington, DC: AASHTO.
AASHTO. (2008). Manual for bridge evaluation. Washington, DC: AASHTO.
AASHTO. (2010). LRFD bridge design specifications. 5th ed. Washington, DC: AASHTO.
Alipour, M., Harris, D. K., and Ozbulut, O. E. (2016). “Vibration testing for bridge load rating.” Chapter 18 in Vol. 2 of Dynamics of civil structures. Edited by S. Pakzad and J. Caicedo, 175–184. Wiesbaden, Germany: Springer Professional.
Ayres Associates and GCI. (2012). Phase III evaluation report for Bridge No. 730045, Flagler County, FL. Prepared for FDOT, District V. Tampa, FL: Ayres Associates and GCI.
Ayres Associates and GCI. (2015). Substructure load rating report for Bridge No. 730045, Flagler County, FL. Prepared for FDOT, District V. Tampa, FL: Ayres Associates and GCI.
Ayres Associates and GCI. (2016). Phase III evaluation report for Bridge No. 720366, Duval County, Florida. Prepared for FDOT, District II. Tampa, FL: Ayres Associates and GCI.
Ayres Associates and GCI. (2017). Phase IV evaluation report for Bridge No. 720366, Duval County, Florida. Report submitted to FDOT, District II. Tampa, FL: Ayres Associates and GCI.
Bozozuk, M. (1978). “Bridge foundations move.” In Tolerable movements of bridge foundations, sand drains, K-test, slopes, and culverts, 17–21. Washington, DC: Transportation Research Board.
Davisson, M. T. (1972). “High capacity piles.” Proc., Lecture Series on Innovations in Foundation Construction, 81–112. New York: ASCE.
Duncan, J. M., and Tan, C. K. (1991). “Engineering manual for estimating tolerable movement of bridges.” Part 5 in Manuals for the design of bridge foundations, NCHRP 343. Edited by R. M. Barker, J. M. Duncaî, K. B. Rojiani, P. S. K. Oot, C. K. Tan, and S. G. Kim, 219–228. Washington, DC: Transportation Research Board.
FB-Deep [Computer software]. Gainesville, FL: Bridge Software Institute.
FB-MultiPier [Computer software]. Gainesville, FL: Bridge Software Institute.
FDOT (Florida Dept. of Transportation). (2002). User’s manual for FB-Deep program. Gainesville, FL: Bridge Software Institute.
FHWA and FDOT (Federal Highway Administration and Florida Dept. of Transportation). (2009). Procedural manual: Reclassify unknown foundation bridges. Tallahassee, FL: FHWA and FDOT.
Grover, R. A. (1978). “Movements of bridge abutments and settlements of approach slabs in Ohio.” In Tolerable movements of bridge foundations, sand drains, K-test, slopes, and culverts, 12–17. Washington, DC: Transportation Research Board.
Hasançebi, O., and Dumlupinar, T. (2013). “Detailed load rating analyses of bridge populations using nonlinear finite element models and artificial neural networks.” Comput. Struct., 128, 48–63.
Khademi, F. (2015). “Load rating of railway bridges by analysis and testing.” M.Sc. thesis, Illinois Institute of Technology, Chicago. UMI (1595303).
Kim, K-H. E., and Andrawes, B. (2017). “Load rating of deteriorated and FRP-retrofitted bridge abutment timber piles.” J. Bridge Eng., 04017058.
Kimley-Horn and Associates and GCI. (2000). Phase III Evaluation Report for Bridge No. 12404, Lee County, Florida. Report submitted to FDOT, District I. West Palm Beach, FL: Kimley-Horn and Associates and GCI.
LEAP CONSPAN v8i. Exton, PA: Bentley.
Moulton, L. K., GangaRao, H. V. S., and Halvorsen, G. T. (1985). Tolerable movement criteria for highway bridges. FHWA-RD-85-107. Prepared for U.S. Dept. of Transportation, Federal Highway Administration. Morgantown, WV: Dept. of Civil Engineering, West Virginia University.
Olson, L. D., Jalinoos, F., and Aouad, M. F. (1998). Determination of unknown subsurface bridge foundations. Geotechnical Engineering Notebook, Guideline No. 16, NCHRP 21-5. Washington, DC: U.S. Dept. of Transportation, Federal Highway Administration.
PONTIS. Washington, DC: AASHTO.
Sayed, S. M., and Bakeer, R. M. (1992). “Efficiency formula for pile groups.” J. Geotech. Eng., 278–299.
Sayed, S. M., and Clemente, J. L. M. (1990). “Horizontal soil stress changes around displacement piles.” Int. J. Numer. Anal. Methods Geomech., 14(2), 131–138.
Sayed, S. M., Sunna, H. N., and Moore, P. R. (2010). “Re-classifying bridges with unknown foundations.” Scour and Erosion, Geotechnical special publication No. 210, edited by S. E. Burns, S. K. Bhatia, C. M. C. Avila, and B. E. Hunt, 903–913. Reston, VA: ASCE.
Sayed, S. M., Sunna, H. N., and Moore, P. R. (2012). “Rational alternative to positive discovery of pile-supported bridges with unknown foundation depth.” J. Bridge Eng., 173–181.
Sayed, S. M., Sunna, H. N., and Moore, P. R. (2013). “Load rating of pile-supported bridges susceptible to scour.” J. Bridge Eng., 440–449.
Vesić, A. S. (1969). “Load transfer, lateral loads and group action of deep foundation” Chapter 1 in Performance of deep foundations, STP444, edited by L. Raymond and D. Elio, 5–14. West Conshohocken, PA: ASTM.
Wahls, H. E. (1990). Design and construction of bridge approaches. Washington, DC: Transportation Research Board.
Walkinshaw, J. L. (1978). “Survey of bridge movements in the western United States.” In Tolerable movements of bridge foundations, sand drains, K-test, slopes, and culverts, 6–11. Washington, DC: Transportation Research Board.
Xanthakos, P. P. (1995). Bridge substructure and foundation design. Upper Saddle River, NJ: Prentice-Hall.
Information & Authors
Information
Published In
Copyright
© 2018 American Society of Civil Engineers.
History
Received: Oct 16, 2017
Accepted: Nov 9, 2017
Published online: Apr 23, 2018
Published in print: Aug 1, 2018
Discussion open until: Sep 23, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.