Recommendations for Determining Debris Loads for Tainter Gates
Publication: Practice Periodical on Structural Design and Construction
Volume 23, Issue 2
Abstract
This article compares the current estimated debris line-load value of 6.78 kN/m (5 kips/ft) on Tainter gates within engineering manuals and technical letters to recent research findings on impact loads. The intent of this study was to investigate, modernize, and create a more defendable methodology for applying debris loads to Tainter gates. This study combined multiple references to create a range of loading values for use by designers in regions that see low, moderate, or severe concentrations of debris. Guidance and recommendations have also been provided for special debris-loading conditions sometimes encountered by design engineers. The findings of this study show that the current recommend debris load, although appropriate and conservative for certain types of debris, may lack flexibility.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The author thanks David Depolo, P.E., and Robert Haehnel, Ph.D., of the COE for encouragement and review of this article.
References
Abela, C. M. (2013). “Stainless steel armor plate design for protecting supercavitating baffle blocks against debris impacts in high-velocity stilling basins.” Pract. Period. Struct. Des. Constr., 177–186.
Abela, C. M. (2017). “Recommendations on building and evaluating three-dimensional finite-element models for Tainter gates.” Pract. Period. Struct. Des. Construct., 04016016.
ASCE. (2010). Minimum design loads for buildings and other structures, ASCE, Reston, VA.
ASCE. (2016). Minimum design loads for buildings and other structures, ASCE, Reston, VA.
FEMA. (2011). “Coastal construction manual.” FEMA P-55, Vol. II, Washington, DC.
Haehnel, R. B., and Daly, S. F. (2002). “Maximum impact force of woody debris on floodplain structures.” Rep. No. ERDC/CRREL TR-02-2, Cold Regions Research and Engineering Laboratory, U.S. Army Engineering Research and Development Center, Hanover, NH.
SAP2000 18 [Computer software]. Computers and Structures, Walnut Creek, CA.
USACE (United States Army Corps of Engineers). (1995). “Flood-proofing regulations.” Engineering Pamphlet No. 1165-2-314, Washington, DC.
USACE (United States Army Corps of Engineers). (1996). “Design of ice booms.” Cold Regions Technical Digest No. 96-1, Washington, DC.
USACE (United States Army Corps of Engineers). (2000). “Design of spillway Tainter gates.” EM 1110-2-2702, Washington, DC.
USACE (United States Army Corps of Engineers). (2002). “Ice engineering.” EM 1110-2-1612, Washington, DC.
USACE (United States Army Corps of Engineers). (2004). “Method to estimate river ice thickness based on meteorological data.” Technical Note 04-3, U.S. Army Engineer Research and Development Center, Hanover, NH.
USACE (United States Army Corps of Engineers). (2007). “Earthquake design and evaluation of concrete hydraulic structures.” EM 1110-2-6053, Washington, DC.
USACE (United States Army Corps of Engineers). (2014). “Engineering technical letter: Design of hydraulic steel structures.” ETL 1110-2-584, Washington, DC.
Information & Authors
Information
Published In
Copyright
© 2018 American Society of Civil Engineers.
History
Received: Aug 23, 2017
Accepted: Oct 25, 2017
Published online: Jan 30, 2018
Published in print: May 1, 2018
Discussion open until: Jun 30, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.