Design of Mobile Facilities Used in Surface Mining Projects
Publication: Practice Periodical on Structural Design and Construction
Volume 21, Issue 1
Abstract
The surface-mining industry provides essential sources of energy in North America and has a major impact on the economy. Little information and few guidelines are available in current codes of practice to feed the engineering demands of the mining industry. Design of mobile mining facilities is a cost-effective concept that has recently evolved in the industry to increase production and meet market demands. This paper illustrates challenging issues that are encountered in the design of mobile structures that will be of interest to practicing engineers and construction contractors. A brief description is first provided to describe the major facilities used in surface mining plants. The economic aspects and cost savings that result from using mobile facilities are also highlighted. The transportation procedure and some of the major design requirements are briefly discussed. Recommendations are provided to compute the center of mass and the structural analysis procedure. The paper contains numerous industrial illustrations to aid the presentation and to describe the challenges encountered in the engineering and construction phases. Unfortunately, there are no design rules or guidelines available to practicing engineers for this type of heavy steel construction.
Get full access to this article
View all available purchase options and get full access to this article.
References
AISC. (2006). Steel construction manual, 14th Ed., Chicago.
Alarie, S., and Gamache, M. (2002). “Overview of solution strategies used in truck dispatching systems for open pit mines.” Int. J. Surf. Min., Reclam. Environ., 16(1), 59–76.
Alpha Natural Resources. (2014). The truth about surface mining: Coal in the American economy, 〈http://truthaboutsurfacemining.com/Impacts/Pages/CoalAmericanEconomy.aspx〉.
ASCE. (2010). “Minimum design loads and other structures.” ASCE/SEI 7-10, Reston, VA.
ASCE Task Committee on Wind-Induced Forces. (2011). Wind loads for petrochemical and other industrial facilities, ASCE, Reston, VA.
Bedair, O. (2009). “Analysis and limit state design of stiffened plates and shells: A world view.” J. Appl. Mech. Rev., 62(2), 1–16.
Bedair, O. (2010). “Dynamic analysis of box girders with tee-stiffening using unconstrained optimization techniques.” J. Struct. Multidiscip. Optim., 42(4), 547–558.
Bedair, O. (2011a). “Serviceability and ultimate limit states of channels under compression and bi-axial bending.” J. Constr. Steel Res., 67(10), 1415–1425.
Bedair, O. (2011b). “Stability limit state design of box sections supporting mining and process facilities.” Int. J. Struct. Eng. Mech., 39(5), 643–659.
Bedair, O. (2011c). “Stress analyses of deep plate girders used at oil and gas facilities with rectangular web penetrations.” Pract. Period. Struct. Des. Constr., 111–120.
Bedair, O. (2012). “Interaction of multiple pipe penetrations used in mining and petrochemical facilities.” J. Thin-Walled Struct., 52(1), 158–164
Bedair, O. (2013). “Engineering challenges in the design of Alberta’s oil-sands projects.” Pract. Period. Struct. Des. Constr., 247–260.
Bedair, O. (2014a). “Modern steel design and construction used in canada’s oil sands industry.” J. Steel Des. Constr. Res., 7(1), 32–40.
Bedair, O. (2014b). “Novel design procedures for rectangular hollow steel sections subject to compression, major & minor axes bending.” Pract. Period. Struct. Des. Constr., 04014051
Bedair, O. (2014c). “Rational design of pipe racks used for oil sands and petrochemical facilities.” Pract. Period. Struct. Des. Constr., 04014029
Bhat, V. (1996). “A model for the optimal allocation of trucks for solid waste management.” Waste Manage. Res., 14(1), 87–96.
Burt, C., and Caccetta, L. (2007). “Match factor for heterogeneous truck and loader fleets.” Int. J. Min. Reclam. Environ., 21(4), 262–270.
Carmichael, D. (1986). “Shovel-truck queues: A reconciliation of theory and practice.” Constr. Manage. Econ., 4(2), 161–177.
CERI (Canadian Energy Research Institute). (2013). Canadian oil sands supply costs and developments. Study No. 133, Calgary, AB, Canada.
CSA (Canadian Standards Association). (2004). “Design of concrete structures.” CAN/CSA-A23.3-04, Mississauga, ON, Canada.
CSA (Canadian Standards Association). (2007). “Limit states design of steel structures.” CAN/CSA-S16-01, Mississauga, ON, Canada.
EIA (U.S. Energy Information Administration). (2014). Short-term energy outlook, 〈http://www.eia.gov/forecasts/steo/report/coal.cfm?src=Coal-b1〉.
Li, Z. (1990). “A methodology for the optimum control of shovel and truck operations in open-pit mining.” Min. Sci. Technol., 10(3), 337–340.
Munirathinam, M., and Yingling, J. C. (1994). “A review of computer-based truck dispatching strategies for surface mining operations.” Int. J. Surf. Min. Reclam. Environ., 8(1), 1–15.
Newman, A. M., Rubio, E., Caro, R., Weintraub, A., and Eurek, K. (2010). “A review of operations research in mine planning.” Interfaces, 40(3), 222–245.
NRC (National Research Council of Canada). (2005). National building code, Ottawa, ON.
PIP (Process Industry Practices). (2004). “Structural design criteria.” PIP STC01015, Austin, TX.
Soumis, F., Ethier, J., and Elbrond, J. (1989). “Truck dispatching in an open pit mine.” J. Surf. Min. Reclam. Environ., 3(2), 115–119.
Information & Authors
Information
Published In
Practice Periodical on Structural Design and Construction
Volume 21 • Issue 1 • February 2016
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Mar 22, 2014
Accepted: Feb 3, 2015
Published online: Jun 11, 2015
Discussion open until: Nov 11, 2015
Published in print: Feb 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.