Flexural Bracing Requirements in Axially Loaded Cold-Formed Steel-Framed Walls
Publication: Practice Periodical on Structural Design and Construction
Volume 20, Issue 4
Abstract
This paper explores an all-steel design philosophy for flexural bracing requirements in cold-formed steel stud walls that employ mechanical bridging alone without sheathing. The current cold-formed steel design specification requires the brace for a single compression member to have stiffness equal to twice the ideal brace stiffness, but related proposals for braces in multiple stud walls, including brace force accumulation and minimum brace stiffness, have not yet been adopted. Bracing strength and stiffness demands in cold-formed steel-framed walls must be adequate to ensure safety but not overly conservative so that the requirements cannot be practically met. Elastic critical load and second-order elastic analyses are conducted herein to determine an adequate level of stiffness for a single braced compression member and relationships between strength and stiffness for braced multiple studs to that of a single stud. Statistics of measured member imperfections are incorporated to provide an equivalent imperfection for multiple stud walls. Design by second-order analysis is utilized to determine how alternating the direction of studs affects strength and stiffness requirements. For a single-braced compression member, the impact of allowing a minimum of 1.33 times, instead of twice the ideal brace stiffness, is explored as an alternative to current requirements. New design expressions for brace stiffness and strength, incorporating the notion of a minimum brace stiffness, and the equivalent imperfection are provided. The new expressions provide the designer with greater flexibility in developing solutions that meet the necessary stiffness and strength requirements.
Get full access to this article
View all available purchase options and get full access to this article.
References
AISC. (2010). “Specification for structural steel buildings.” AISC-360, Chicago.
American Iron and Steel Institute (AISI). (2012a). “North American specification for the design of cold-formed steel structural members.” AISI-S100, Washington, DC.
American Iron and Steel Institute (AISI). (2012b). “North American standard for cold-formed steel framing: General provisions.” AISI-S200, Washington, DC.
Green, P. S., Sputo, T., and Urala, V. (2006). “Strength and stiffness of conventional bridging systems for cold-formed cee studs.” J. Struct. Eng., 550–557.
MASTAN2 3.3 [Computer software]. New York, Wiley.
Sputo, T., and Beery, K. (2008). “Bracing demand in axially loaded cold-formed steel stud walls.” J. Archit. Eng., 85–89.
Sputo, T., and Turner, J. L. (2006). Bracing cold-formed steel structures: A design guide, ASCE, Reston, VA.
Vieira, L. C. M., Jr., and Schafer, B. W. (2013). “Behavior and design of sheathed cold-formed steel stud walls under compression.” J. Struct. Eng., 772–786.
Winter, G. (1960). “Lateral bracing of columns and beams.” Trans. ASCE, 125(1), 807–826.
Zeinoddini, V. M. (2011). “Geometric imperfections in cold-formed steel members.” Ph.D. thesis, Dept. of Civil Engineering, Johns Hopkins Univ., Baltimore.
Ziemian, R. (2010). Guide to stability design criteria for metal structures, 5th Ed., Wiley, New York.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Mar 25, 2014
Accepted: Jul 15, 2014
Published online: Aug 7, 2014
Published in print: Nov 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.