Lessons from Using BIM to Increase Design-Construction Integration
Publication: Practice Periodical on Structural Design and Construction
Volume 19, Issue 1
Abstract
Building information modeling (BIM) has started to become a common practice in the architectural, engineering, construction, and facilities management (AEC-FM) industry. The benefits of BIM have been recognized in the AEC-FM industry, and numerous design firms and contractors reported benefits of utilizing BIM in their projects. However, the potential of BIM technology to facilitate design-construction collaboration and to reduce the construction coordination costs, schedule, and request for information (RFI)s has not yet been achieved. In current practice, design and construction phases are not well integrated. Conventional practice is to produce a conceptual design based on no particular construction sequence, means, or methods. Construction knowledge must be deployed to support design. In doing so, BIM that is suitable for construction documentation at fabrication level of detail also can be exploited. The term high-definition building information modeling (HIDEF BIM) is used to describe BIM that is detailed and precise enough to create shop drawings directly from the model. Additionally, the use of HIDEF BIM offers the opportunity to examine construction sequence to produce a design that can be less expensive, save time, and be of a higher quality. This paper explores the benefits of utilizing HIDEF BIM and the lessons learned through a case study.
Get full access to this article
View all available purchase options and get full access to this article.
References
Akula, M., Lipman, R. R., Franaszek, M., Saidi, K. S., Cheok, G. S., and Kamat, V. R. (2012). “Augmenting BIM with 3D imaging data to control drilling for embeds into reinforced concrete bridge decks.” Proc., ASCE Construction Research Congress, ASCE, Reston, VA, 1145–1154.
American Institute of Architects (AIA). (2008). “Building information modeling protocol exhibit.” Document E202, Washington, DC.
Arayici, Y., Coates, P., Koskela, L., Kagioglou, M., Usher, C., and O'Reilly, K. (2011). “BIM adoption and implementation for architectural practices.” Struct. Surv., 29(1), 7–25.
Barlish, K., and Sullivan, K. (2012). “How to measure the benefits of BIM—A case study approach.” Autom. Construct., 24(July), 149–159.
Becerik-Gerber, B., and Rice, S. (2010). “The perceived value of building information modeling in the U.S. building industry.” ITcon, 15, 185–201.
Eastman, C. M., Teicholz, P., Sacks, R., and Liston, K. (2008). BIM handbook: A guide to building information modeling for owners, managers, architects, engineers, and contractors, Wiley, Hoboken, NJ.
Fischer, M., and Kunz, J. (2003). “Impact of information technology on facility engineering.” Leadership Manage. Eng., 100–103.
Hajian, H., and Becerik-Gerber, B. (2010). “Scan to BIM: Factors affecting operational and computational errors and productivity loss.” Proc., 27th Int. Symposium on Automation and Robotics in Construction (ISARC), International Association for Automation and Robotics in Construction, Bratislava, Slovakia, 265–272.
Hajian, H., and Brandow, G. (2012). “As-built documentation of structural components for reinforced concrete construction quality control with 3D laser scanning.” Proc., ASCE Computing in Civil Engineering, ASCE, Reston, VA, 253–260.
Imaginit Technologies. (2013). “Scan-to-BIM: Create a Revit model from your point cloud data.” 〈http://imaginit.com/software-solutions/building-architecture/scan-to-bim〉 (Aug. 4, 2013).
Ku, K., Pollalis, S., Fischer, M., and Shelden, D. (2008). “3D model-based collaboration in design development and construction of complex shaped buildings.” ITcon, 13(Special), 258–285.
Kvan, T. (2000). “Collaborative design: What is it?” Autom. Construct., 9(4), 409–415.
Leite, F., Akcamete, A., Akinci, B., Atasoy, G., and Kiziltas, S. (2011). “Analysis of modeling effort and impact of different levels of detail in building information models.” Autom. Construct., 20(5), 601–609.
National Institute of Building Sciences (NIBS). (2012). “National building information modeling standard.” NBIMS-US V2, Building Smart Alliance, Washington, DC.
Sacks, R., and Barak, R. (2008). “Impact of three-dimensional parametric modeling of buildings on productivity in structural engineering practice.” Autom. Construct., 17(4), 439–449.
Shen, Z., and Issa, R. R. A. (2010). “Quantitative evaluation of the BIM-assisted construction detailed cost estimates.” ITcon, 15, 234–257.
Soulé [Computer software]. Danville, CA, Soulé.
Staub-French, S., and Khanzode, A. (2007). “3D and 4D modeling for design and construction coordination: Issues and lessons learned.” ITcon, 12, 381–407.
Succar, B. (2009). “Building information modeling framework: A research and delivery foundation for industry stakeholders.” Autom. Construct., 18(3), 357–375.
Tekla Structures 17.0 [Computer software]. Espoo, Finland, Tekla.
Young, N., Jones, S. A., Bernstein, H. M., and Gudgel, J. E. (2009). The business value of BIM: Getting building information modeling to the bottom line, McGraw Hill, New York.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Mar 15, 2013
Accepted: Sep 16, 2013
Published online: Sep 18, 2013
Published in print: Feb 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.