Installation Aspects of Smart Grid
Publication: Practice Periodical on Structural Design and Construction
Volume 18, Issue 1
Abstract
Over the last few years, there has been the realization that the current electrical grid needs to undergo major upgrades. The government, utility companies, and several other stakeholders have proposed modernizing the electrical grid to make it efficient to meet predicted power demands. This modernized grid is generally termed as the smart grid. In addition to the grid capacity and reliability issues, the current electrical grid requires upgrades to resolve major challenges including the network of independently owned components, old and outdated parts, wastage from inefficiency, a design that did not consider renewable energy, and susceptibility to attacks from hackers and terrorists. It is evident that the growth of a smart grid will require substantial development and installation efforts. These efforts will present opportunities to the construction industry, especially electrical contractors. For electrical contractors to take advantage of these opportunities, they need to be conversant with technologies associated with a smart grid and their installation and construction management–related aspects. This research explored smart grid technologies both in the market and in research and development and developed the installation and construction management aspects of these technologies. The work scopes associated with these technologies for the electrical construction industry were also explored.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Funding for this research was provided by ELECTRI International, the research foundation of the National Electrical Contractors Association (NECA). In addition, industry task force members and several other industry and utility companies provided input and case studies. The authors gratefully acknowledge these contributions. The opinions and findings expressed here, however, are those of the authors alone and are not necessarily the views or positions of ELECTRI International and NECA.
References
Ahmad, A., et al. (2005). “A composite core conductor for low sag at high temperatures.” Temp. IEEE Trans. Power Deliv., 20(3), 2193–2199.
ANSI. (2005). “Standard for installing and maintaining liquid-filled transformers.” NECA 410-2005, Washington, DC.
ANSI. (2010). “Standard for certification of electrical testing technicians.” NETA ETT-2010, Washington, DC.
ASCE. (1997). Design of latticed steel transmission structures, Reston, VA.
ASCE. (2008). Substation structure design guide, Reston, VA.
ASCE. (2011). Design of steel transmission pole structures, Reston, VA.
ASTM. (2008). “Standard specification for carbon structural steel.” A36/A36M-08, West Conshohocken, PA.
Austin Energy. (2010). “Austin Energy smart grid program.” 〈http://www.austinenergy.com/About%20Us/Company%20Profile/smartGrid/index.htm〉 (Aug. 1, 2010).
Brown, F. D. (2006). “Brown University facilities design and construction requirements section 16461C—Dry type transformers.” 〈http://www.brown.edu/Facilities/Facilities_Management/docs/FDG/16/461/16461C.pdf〉 (Apr. 1, 2011).
California Public Utilities Commission (CPUC). (2010). “The California solar initiative research, development, demonstration and deployment (RDandD) plan.” 〈http://www.cpuc.ca.gov/PUC/energy/Solar/rdd.htm〉 (Mar. 1, 2010).
Department of Energy (DOE). (2009a). “Advanced vehicle testing activity plug-in hybrid electric vehicle charging infrastructure review.” 〈http://www1.eere.energy.gov/vehiclesandfuels/avta/pdfs/phev/phev_infrastructure_report_08.pdf〉 (Sep. 1, 2010).
Department of Energy (DOE). (2009b). “Smart grid system report” 〈http://www.oe.energy.gov/DocumentsandMedia/SGSRMain_090707_lowres.pdf〉 (Sep. 1, 2010).
Department of Energy (DOE). (2009c). “The smart grid: An introduction.” 〈http://www.oe.energy.gov/DocumentsandMedia/DOE_SG_Book_Single_Pages(1).pdf〉 (Sep. 1, 2010).
Electric Advisory Committee (EAC). (2008). “Bottling electricity: Storage as a strategic tool for managing variability and capacity concerns in the modern grid.” 〈http://energy.gov/sites/prod/files/oeprod/DocumentsandMedia/final-energy-storage_12-16-08.pdf〉 (Sep. 1, 2010).
Electric Power Research Institute. (2000). “Superconducting cable construction and testing.” 〈http://www.w2agz.com/Library/Superconductivity/Cable%20Archives/EPRI-Pirelli%20Final%20Report%201000160.pdf〉 (Nov. 1, 2010).
Electric Power Research Institute (EPRI). (2001). Smart substations: A preliminary assessment, Electric Power Research Institute, Palo Alto, CA.
Electric Power Research Institute (EPRI). (2003). Electricity sector framework for the future, volume 1: Achieving the 21st century transformation, Electric Power Research Institute, Washington, DC.
Electric Power Research Institute (EPRI). (2007a). Advanced metering infrastructure, Electric Power Research Institute, Palo Alto, CA.
Electric Power Research Institute (EPRI). (2007b). Energy storage for grid connected wind generation applications, Electric Power Research Institute, Palo Alto, CA.
Electric Power Research Institute (EPRI). (2009). “The electricity technology portfolio of the future.” 〈http://www.sais-jhu.edu/centers/geei/presentations/GEEINCAC2009/Tyran.pdf〉 (Aug. 1, 2010).
Energy Information Administration. (2010). “Electric power industry 2008: Year in review.” 〈http://www.eia.doe.gov/cneaf/electricity/epa/epa_sum.html〉 (Oct. 1, 2010).
Energy Storage Association (ESA). (2009). “Storage technologies–flywheels.” 〈http://www.electricitystorage.org/ESA/technologies/flywheels/〉 (Apr. 1, 2010).
EPA. (2010). “Spill prevention control, and countermeasure (SPCC) regulation 40 CFR part 112 A facility owner/operators guide to oil pollution prevention 2010.” 〈http://www.epa.gov/emergencies/docs/oil/spcc/spccbluebroch.pdf〉 (Aug. 2010).
Gale, R. W., and O’Driscoll, M. (2001). The case for new electricity transmission and siting new transmission lines, Edison Electric Institute, Washington, DC.
Gomez, M., et al. (2010). “New energetic scenario with renewable energy.” Int. Conf. on Renewable Energies and Power Quality, European Association for the Development of Renewable Energies Environment and Power Quality, Vigo, Spain.
Google. (2010). “Google Corp.—Plans for transmission lines.” 〈http://www.nytimes.com/2010/10/12/science/earth/12wind.html〉 (Apr. 2011).
Hart, D. (2008). “Using AMI to realize the smart grid.” Power and Energy Society General Meeting—Conversion and Delivery of the Electrical Energy in the 21st Century, IEEE, Pittsburgh, PA.
IEEE. (2006). “IEEE standard for standard general requirements for liquid-immersed distribution, power, and regulating transformers.” 〈http://www.techstreet.com/cgi-bin/pdf/preview/2378335/previews/IEEE_C57_12_00-2006_pre.pdf〉 (Feb. 2012).
International Energy Agency (IEA). (2008). World energy outlook, global trends 2008–2030, International Energy Agency, Paris.
ITC (International Transmission Company). (2010). “The Green Power Express—Plans for a new transmission line.” 〈http://www.thegreenpowerexpress.com〉 (Feb. 2012).
Jones, W. (2006). “More heat, less sag.” IEEE Spectr., 43(6), 16–18.
Kopsidas, K., and Rowland, S. (2009). “A performance analysis of reconductoring an overhead line structure.” IEEE Trans. Power Deliv., 24(4), 2248–2256.
Malozemoff, A., et al. (2008). “Progress in high temperature superconductor coated conductors and their applications.” Superconductor Sci. Technol., 21(3), 1–7.
McConnell, B. (2005). “Applications of high temperature superconductors to direct current electric power transmission and distribution.” IEEE Trans. Appl. Supercond., 15(2), 2142–2145.
McVeigh, J., et al. (1999). “Winner, loser or innocent victim? Has renewable energy performed as expected?” Solar Energy, 68(3), 237–255.
Meyer, D., and Sedano, R. (2002). “Transmission siting and permitting.” 〈http://www.certs.lbl.gov/ntgs/issue-5.pdf〉 (Oct. 2010).
Michgan Public Service Commission (MPSC). (2010). “State electric regulators assistance grant DE FOA 0000100 DE-FOA.” 〈http://www.dleg.state.mi.us/mpsc/electric/workgroups/smartgrid/doe_sera_grant_presentation.pdf〉 (Feb. 2012).
National Electrical Contractors Association (NECA). (2005). “Installing and maintaining liquid filled transformers.” Standard 410-2005. Bethesda, MD.
National Electrical Contractors Association (NECA). (2009). “Installing and maintaining dry-type transformers,” Standard 409-2009.
National Energy Technology Laboratory (NETL). (2007). Appendix B1: A systems view of the modern grid: Integrated communications, Department of Energy, Washington, DC.
National Energy Technology Laboratory (NETL). (2008). “Advanced metering infrastructure.” 〈http://www.netl.doe.gov/smartgrid/referenceshelf/whitepapers/AMI%20White%20paper%20final%20021108%20%282%29%20APPROVED_2008_02_12.pdf〉 (Apr. 2011).
National Energy Technology Laboratory (NETL). (2010). “Benefits of smart grid.” 〈http://www.netl.doe.gov/smartgrid/referenceshelf/whitepapers/06.18.2010_Understanding%20Smart%20Grid%20Benefits.pdf〉 (Dec. 2010).
National Electric Manufacturers Association (NEMA). (1998). “NEMA ST-1.” 〈http://www.brownbookshop.com/products/NEMA-ST-1%252d1988%3A-Specialty-Transformers-%28Except-General%252dPurpose-Type%29.html〉 (Apr. 2011).
National Electric Manufacturers Association (NEMA). (2002). “NEMA TP-1 guide for determining energy efficiency for distribution transformers.” 〈http://www.nema.org/stds/tp1.cfm#download〉 (Apr. 2011).
National Fire Protection Association (NFPA). (2011). “NFPA 70 national electric codes 2011.” 〈http://www.nfpa.org/catalog/product.asp?title=2011-NFPA-70-National-Electrical-Code-NEC-Handbookandcategory_name=andpid=70HB11andtarget_pid=70HB11andsrc_pid=andlink_type=searchandorder_src=〉. (Feb. 2012).
Ofei-Amoh, K. R., and Syal, M. (2011). “Installation and construction management aspects of smart grids.” M.S. thesis, Construction Management, School of Planning, Design and Construction, Michigan State Univ., East Lansing, MI.
Pacific Crest Transformers. (2009). “Testing of power transformers.” 〈http://www.pacificcresttrans.com/resource-center/12/Testing-of-Power-Transformers.html〉 (Sep. 2010).
Roncero, J. (2008). Integration is key to smart grid management, Institute of Engineering and Technology, International Conference on Electricity Distribution, Prague, Czech Republic.
Schwenterly, S. W., Zhang, Y., Pleva, E. F., and Rufer, M. (2010). “Vacuum studies of a prototype composite coil dewar for HTSC transformers” 〈http://scitation.aip.org.proxy2.cl.msu.edu/getpdf/servlet/GetPDFServlet?filetype=pdfandid=APCPCS001218000001000764000001andidtype=cvipsanddoi=10.1063/1.3422428andprog=normal〉 (Feb. 2012).
Spang. (2011). “Spang power electronics dry type transformer installation SPC-TD150-90.” 〈http://www.google.com/url?sa=tandsource=webandcd=1andved=0CBQQFjAAandurl=http%3A%2F%2Fspangpower.com%2FStreamFile.aspx%3Fid%3D1793357c-9941-42e1-b038-3d381c83711bandrct=jandq=%20Dry%20type%20Transformer%20Installation%20SPC-TD150-90%20andei=xEynTanpNe-F0QG6msH5CAandusg=AFQjCNFetD2qRS2MFU9i36s4MvuL-gv_mwandcad=rja〉 (Apr. 2011).
Thrash, F. (1999). “ACSS/TW—An improved conductor for upgrading existing lines or new construction.” IEEE Transmission and Distribution Conf., Vol. 2, Institute of Electrical and Electronics Engineers, Washington, DC., 852–857.
Underwriters Laboratories (UL). (2008). “UL standard 506.” 〈http://ulstandardsinfonet.ul.com/scopes/scopes.asp?fn=0506.html〉 (Feb. 2012).
Underwriters Laboratories (UL). (2010). “UL standard 1561.” 〈http://ulstandardsinfonet.ul.com/scopes/scopes.asp?fn=1561.html〉 (Apr. 2011).
Ulliman, J. (2009). “Gridtech solutions.” 〈http://www.amsc.com/gridtec/index.html〉 (Apr. 2011).
Vajjhala, S. (2006). “Siting renewable energy facilities: A special analysis of promise and pitfalls.” 〈http://www.rff.org/documents/rff-dp-06-34.pdf_〉 (Apr. 2011).
Vajjhala, S., and Fischbeck, P. S. (2006). “Quantifying siting difficulty: A case study of US transmission line siting.” 〈http://www.rff.org/documents/rff-dp-06-03.pdf_〉 (Apr. 2011).
World Economic Forum (WEF). (2009). “Accelerating smart grid investments WEF Geneva, Switzerland.” 〈http://www3.weforum.org/docs/WEF_EN_AcceleratingSmartGridInvestmentsReport_2009.pdf〉 (Oct. 2010).
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Feb 20, 2012
Accepted: May 29, 2012
Published online: Jul 14, 2012
Published in print: Feb 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.