Verification of the Strength of the Anchor Point of Fall-Arresting and Positioning Systems for Reinforcing Steel Erectors
Publication: Practice Periodical on Structural Design and Construction
Volume 17, Issue 3
Abstract
For walls of great dimensions, fall protection is problematic. Reinforcing steel erectors have to climb on the reinforcement bars to anchor and position themselves to do their tasks and to protect themselves against falls. Two problems are identified: (1) the selection of a harness and positioning and fall-arrest equipment and (2) an anchor point sufficiently strong for the positioning and the personal fall-arrest systems. This paper describes the dynamic fall tests that have been carried out to verify the strength of tied reinforcement used as an anchor point for the fall-arresting and positioning systems of reinforcing steel erectors.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Society of Safety Engineers. (2007a). “Minimum requirements for a comprehensive managed fall protection program.” ANSI/ASSE Z359.2, Des Plaines, IL.
American Society of Safety Engineers. (2007b). “Safety requirements for personal fall arrest systems, subsystems, and components.” ANSI/ASSE Z359.1, Des Plaines, IL.
Canadian Standards Association (CSA). (2004). “Design of active fall protection.” CAN/CSA-Z259.16-04, National Standard of Canada, Mississisauga, Ontario, Canada.
Canadian Standards Association (CSA). (2005a). “Body belts and saddles for work positioning and travel restraint.” CAN/CSA-Z259.1-05, National Standard of Canada, Rexdale, Ontario, Canada.
Canadian Standards Association (CSA). (2005b). “Energy absorbers and lanyards.” CAN/CSA-Z259.11-05, National Standard of Canada, Mississauga, Ontario, Canada.
Canadian Standards Association (CSA). (2006). “Full body harnesses.” CAN/CSA-Z259.10-06, National Standard of Canada, Rexdale, Ontario, Canada.
Corbeil, J. F. (1995). “Ancrages déformables pour une ligne d’assurance horizontale.” Mémoire de Maîtrise ès Sciences Appliquées, Département de génie mécanique, École Polytechnique de Montréal (in French).
Éditeur official du Québec. (2001). “Quebec safety code for the construction industry.” S-2.1, r.6, Québec.
Lan, A., and Arteau, J. (1994). Système d’attaches pour afficheurs, Institut de recherche Robert-Sauvé en santé et en sécurité du travail (IRSST), Montréal, et appendices (in French).
Lan, A., and Arteau, J. (2000). “Développement et validation d′une méthode d′évaluation des garde-corps fabriqués et installés à pied d’œuvre sur les chantiers.” Projet # 99-030, Institut de recherche Robert-Sauvé en santé et en sécurité du travail (IRSST), Montreal (in French).
Occupational Safety and Health Administration (OSHA). (1995a). “Safety belts, lifelines and lanyards.” OSHA 1926.104, U.S. Dept. of Labor, Washington, DC.
Occupational Safety and Health Administration (OSHA). (1995b).“Fall protection systems criteria and practices.” OSHA 1926.502, U.S. Dept. of Labor, Washington, DC.
Oregon Occupational Safety and Health Administration. (2000). “Fall protection-rebar and concrete formwork.” Document 440-2824D (7/00), Occupational Safety and Health Division, Salem, OR.
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Jul 21, 2010
Accepted: Nov 14, 2011
Published online: Nov 16, 2011
Published in print: Aug 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.