Configuration Optimization of Drilled Shafts Supporting Bridge Structures: Three Case Studies
Publication: Practice Periodical on Structural Design and Construction
Volume 17, Issue 3
Abstract
A common approach to estimating the point of fixity is to utilize the results of a single pile lateral analysis. Although no universal agreement exists as to the definition of the location of the point of fixity, it is generally accepted that its location will affect the computed stresses and displacements of a bridge structure. This study summarizes a method to determine a cantilever’s equivalent length of drilled shaft foundation elements supporting a bridge. Results from an equivalent frame model are compared to those for bents modeled using the finite element method and nonlinear soil models for three bridges in North Carolina. Results indicated that the equivalent frame model provides responses that are comparable to those obtained from more rigorous finite element analyses. The study presents the results of the optimization of the support system by reducing the number, or size, of the shafts while maintaining an acceptable level of safety.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the efforts of the North Carolina Department of Transportation (NCDOT) Structures and Geotechnical Units for funding this research. The technical contributions of NCDOT engineers throughout the course of the work were invaluable. Their help and assistance are highly valued and appreciated.
References
AASHTO. (2004). AASHTO LRFD Bridge Design Specifications, 3rd Ed., Washington, DC.
Davisson, M. T., and Robinson, K. E. (1965). “Bending and buckling of partially embedded piles.” Proc., 6th Int. Conf. Soil Mechanics and Foundation Engineering, Univ. of Toronto Press, Montreal, 243–246.
FB-MultiPier Version 4 [Computer software]. Bridge Software Institute, Gainesville, FL.
LPILE [Computer software]. Ensoft, Austin, TX.
McVay, M. C., and Niraula, L. (2004). “Development of modified T-Z curves for large diameter piles/drilled shafts in limestone for FB-Pier.” Rep. No. 4910-4504-878-12, National Technical Information Service, Springfield, VA.
O’Neill, M. W., and Reese, L. C. (1999). “Drilled shafts: Construction procedures and design methods.” Publication No. FHWA-IF-99-025, U.S. Dept. of Transportation, Federal Highway Administration, Washington, DC, 535.
O’Neill, M. W., Townsend, F. C., Hassan, K. M., Buller, A., and Chan, P. S. (1996). “Load transfer for drilled shafts in intermediate geomaterials.” Rep. No. FHWA-RD-95-172, US Dept. of Transportation, Washington, DC.
Reese, L. C., Cox, W. R., and Koop, F. D. (1974). “Analysis of laterally loaded piles in sand.” Proc., 5th Annual Offshore Technology Conf. (GESA Rep. No. D-75-9).
Reese, L. C., and Welch, R. C. (1975). “Lateral loading of deep foundations in stiff clay.” J. Geotech. Engrg. Div.AJGEB6, 101(7), 633–649.
Robinson, B., Suarez, V., Robalino, P., Kowalsky, M., and Gabr, M. (2006). “Pile bent design criteria.” NCDOT Research Project 2005-19, North Carolina Dept. of Transportation, Raleigh, NC.
Robinson, B., Suarez, V., Robalino, P., Kowalsky, M., and Gabr, M. (2007). “A point of fixity model for pile and shaft bents.” Proc., Sessions of Geo-Denver 2007 Congress: Contemporary Issues in Deep Foundations (GSP 158), Geotechnical Special Publication No. 158, ASCE-Geo Institute, Reston, VA.
SAP 2000 Version 8.2.5 [Computer software]. Computers and Structures, Berkeley, CA.
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Sep 14, 2010
Accepted: Sep 12, 2011
Published online: Sep 14, 2011
Published in print: Aug 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.