Mechanical Behavior of Submarine Pipelines under Active Strike-Slip Fault Movement
Publication: Journal of Pipeline Systems Engineering and Practice
Volume 9, Issue 3
Abstract
This paper presents comprehensive results on the mechanical behavior of submarine steel pipelines subjected to various strike-slip fault displacement loads. The investigation uses strain-based criteria to estimate pipeline performance based on rigorous numerical modeling and simulation of a soil–pipe system, accounting for nonlinear material behavior and large strain of both pipeline and surrounding seabed soil. Equivalent boundary conditions are derived and applied at both ends of the pipeline to take the effect of pipeline segments far away from the fault into account. Parameters affecting the response of submarine pipelines subjected to active faults (including pipe diameter, diameter-to-thickness ratio, burial depth, soil stiffness, and intersection angles) are studied. A uniform design experiment is also carried out to predict the critical fault displacement. The results show that the segments of the pipe embedded in both blocks near the fault plane are critical locations where buckling or rupture is more likely to occur. The ability of the pipeline to withstand more fault displacements can be enhanced by increasing the diameter and wall thickness. In addition, the choice of proper burial depth and differential pressure can lead to an increase in flexural stiffness and weaker soil–pipeline interaction. Pipe diameter, crossing angles, and burial depth determine the pipeline’s failure modes. An accurate regression derived from finite uniform design experiments is proposed for the performance-based design of future submarine pipelines.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work is supported by the Key Project of Research Innovation Fund of Harbin Institute of Technology (HIT.NSRIF.201709), Shandong Province Science and Technology Development Plan Item (2014GSF122001), National Natural Science Foundation of China (51678208 and 51238012), and the Co-Operative Innovation Center of Engineering Construction and Safety in Shandong Peninsula Blue Economic Zone. These are gratefully acknowledged.
References
ABAQUS version 6.13 [Computer software]. Dassault Systemes, Providence, RI.
ALA (American Lifelines Alliance). (2005). “Guidelines for the design of buried steel pipe.” ASCE, New York.
Arifin, R. B., Zhao, P., and Bai, Y. (2010). “Seismic analysis for the subsea pipeline system.” ASME 29th Int. Conf. on Ocean, Offshore and Arctic Engineering, ASME, New York, 659–667.
Ariman, T., and Muleski, G. E. (1981). “A review of the response of buried pipelines under seismic excitations.” Earthquake Eng. Struct. Dyn., 9(2), 131–152.
ASCE. (1984). “Guidelines for the seismic design of oil and gaspipeline systems.” New York.
Canadian Standards Association. (2007). “Oil and gas pipeline systems.” CSA-Z662-2007, Mississauga, ON, Canada.
China Classification Society. (2010). “China classification society code for analysis of submarine pipeline structure.” China Communications, Beijing (in Chinese).
DNV (Det Norske Veritas). (2007). “Offshore standard-submarine pipeline systems.” DNV OS-F101:2007, Høvik, Norway.
DPS [Computer software]. Science Press, Beijing.
Duan, M., Mao, D., Yue, Z., Estefen, S., and Li, Z. (2011). “A seismic design method for subsea pipelines against earthquake fault movement.” China Ocean Eng., 25(2), 179–188.
Duan, M., Sun, Z., Gao, Z., Jia, X., and Su, J. (2004). “Ultimate stress analysis for subsea pipeline design against earthquakes.” 14th Int. Offshore and Polar Engineering Conf., International Society of Offshore and Polar Engineers, Mountain View, CA, 77–81.
Fang, K. T., Lin, D. K. J., Winker, P., and Zhang, Y. (2000). “Uniform design: Theory and application.” Technometrics, 42(3), 237–248.
Gu, X., and Zhang, H. (2009). “Research on aseismatic measures of gas pipeline crossing a fault for strain-based design.” ASME 2009 Pressure Vessels and Piping Conf., ASME, Vancouver, BC, Canada, 571–580.
Ha, D., Abdoun, T. H., O’Rourke, M. J., and Symans, M. D. (2008). “Centrifuge modeling of earthquake effects on buried high-density polyethylene (HDPE) pipelines crossing fault zones.” J. Geotech. Geoenviron. Eng., 1501–1515.
Huang, Q., Gardoni, P., and Hurlebaus, S. (2010). “Probabilistic seismic demand models and fragility estimates for reinforced concrete highway bridges with one single-column bent.” J. Eng. Mech., 1340–1353.
Joshi, S., Prashant, A., Deb, A., and Jain, S. K. (2011). “Analysis of buried pipelines subjected to reverse fault motion.” Soil Dyn. Earthquake Eng., 31(7), 930–940.
Kalliontzis, C. (1998). “Numerical simulation of submarine pipelines in dynamic contact with a moving seabed.” Earthquake Eng. Struct. Dyn., 27(5), 465–486.
Karamitros, D. K., Bouckovalas, G. D., and Kouretzis, G. P. (2007). “Stress analysis of buried steel pipelines at strike-slip fault crossings.” Soil Dyn. Earthquake Eng., 27(3), 200–211.
Kennedy, R. P., Chow, A. W., and Williamson, R. A. (1977). “Fault movement effects on buried oil pipeline.” J. Transp. Eng., 103(5), 617–633.
Kokavessis, N. K., and Anagnostidis, G. S. (2006). “Finite element modeling of buried pipelines subjected to seismic loads: Soil structure interaction using contact elements.” ASME 2006 Pressure Vessels and Piping/ICPVT-11 Conf., ASME, Vancouver, BC, Canada.
Li, P., Tao, Y. L., and Zhou, J. (2013). “A study of the ultimate compressive strain of local buckling in strain-based design of pipelines.” Nat. Gas Ind., 33(7), 101–107 (in Chinese).
Liang, J., and Sun, S. (2000). “Site effects on seismic behavior of pipelines: A review.” J. Pressure Vessel. Technol., 122(4), 469–475.
Liu, A., Takada, S., and Hu, Y. (2004). “A shell model with an equivalent boundary for buried pipelines under the fault movement.” 13th World Conf. on Earthquake Engineering, 13WCEE Secretariat, Vancouver, BC, Canada, 1–8.
Mokhtari, M., and Nia, A. A. (2015). “The influence of using CFRP wraps on performance of buried steel pipelines under permanent ground deformations.” Soil. Dyn. Earthquake Eng., 73, 29–41.
Naeini, S. A., Mahmoudi, E., Shojaedin, M. M., and Misaghian, M. (2016). “Mechanical response of buried high-density polyethylene pipelines under normal fault motions.” KSCE J. Civ. Eng., 20(6), 2253–2261.
Newmark, N. M., and Hall, W. J. (1975). “Pipeline design to resist large fault displacement.” Proc., U.S. Conf. on Earthquake Engineering, Earthquake Engineering Research Institute, Ann Arbor, MI.
Paolucci, R., Griffini, S., and Mariani, S. (2010). “Simplified modelling of continuous buried pipelines subject to earthquake fault rupture.” Earthquake Struct., 1(3), 253–267.
People’s Republic of China National Development and Reform Commission. (2004). “Code for seismic design of oil and gas steel pipeline.” SY/T0450-2004, Beijing (in Chinese).
Takada, S., Hassani, N., and Fukuda, K. (2001). “A new proposal for simplified design of buried steel pipes crossing active faults.” Earthquake Eng. Struct. Dyn., 30(8), 1243–1257.
Tang, Q. Y., and Zhang, C. X. (2013). “Data processing system (DPS) software with experimental design, statistical analysis and data mining developed for use in entomological research.” Insect. Sci., 20(2), 254–260.
Tarinejad, R., Mahdavi, A., and Jahangir, N. (2012). “Buried pipeline response analysis to reverse-slip fault displacements.” 15th World Conf. on Earthquake Engineering, Sociedade Portuguesa de Engenharia Sismica (SPES), Lisbon, Portugal.
Teh, T. C., Palmer, A. C., and Damgaard, J. S. (2003). “Experimental study of marine pipelines on unstable and liquefied seabed.” Coast. Eng., 50(1), 1–17.
Trifonov, O. V., and Cherniy, V. P. (2010). “A semi-analytical approach to a nonlinear stress-strain analysis of buried steel pipelines crossing active faults.” Soil. Dyn. Earthquake Eng., 30(11), 1298–1308.
Vazouras, P., Karamanos, S. A., and Dakoulas, P. (2010). “Finite element analysis of buried steel pipelines under strike-slip fault displacements.” Soil. Dyn. Earthquake Eng., 30(11), 1361–1376.
Wang, J. G., Karim, M. R., and Lin, P. Z. (2007). “Analysis of seabed instability using element free Galerkin method.” Ocean Eng., 34(2), 247–260.
Wang, L. R. L., and Wang, L. J. (1998). “Parametric study of buried pipelines due to large fault movements.” Proc., 3rd Trilateral China-Japan-U.S. Symp. on Lifeline Earthquake Engineering, Kobe Univ. of Japan, Kobe, Japan, 165–172.
Wang, L. R. L., and Yeh, Y. H. (1985). “A refined seismic analysis and design of buried pipeline for fault movement.” Earthquake Eng. Struct. Dyn., 13(1), 75–96.
Yuan, F., Li, L., Guo, Z., and Wang, L. (2015). “Landslide impact on submarine pipelines: Analytical and numerical analysis.” J. Eng. Mech., 04014109.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Mar 8, 2017
Accepted: Nov 2, 2017
Published online: Apr 11, 2018
Published in print: Aug 1, 2018
Discussion open until: Sep 11, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.