Vibration and Stress Analyses of Positive Displacement Pump Pipeline Systems in Oil Transportation Stations
Publication: Journal of Pipeline Systems Engineering and Practice
Volume 7, Issue 1
Abstract
In oil transportation stations, the plunger motion exhibited by positive displacement pumps can cause a great deal of vibration that can influence the secure operations of the equipment and pipelines. If resonance between the equipment and pipelines occurs, their integrity can be compromised, resulting in catastrophic damage. Therefore, both stress analysis and vibration analysis are necessary before a pipeline is formally put into operation. For this study, mechanical models of pipelines and constraints in positive displacement pump pipeline systems, based on theories of stress and vibration in pipelines, were created. Numerical simulations, including stress, modal, and vibration analyses were performed on-site at an oil transportation station in west China. The data were collected, reported, calibrated according to published standards, and then analyzed. The results revealed that the models created were reliable for stress and vibration analyses of pipelines in practical applications and that resonance between pipelines and equipment can be avoided by enhancing the pipeline’s support and increasing its natural frequency. This research also provides engineering design suggestions for positive displacement pump pipeline systems.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research is supported by Sichuan Provincial Key Disciplinary Development Project Fund (SZD0416). A special acknowledgement should be given to the project, Research on stress analysis of oil pipeline from Southwest Petroleum University.
References
ANSYS [Computer software]. Canonsburg, PA, ANSYS.
API (American Petroleum Institute). (2007). “Reciprocating compressors for petroleum, chemical, and gas industry services.” API 618, Washington, DC.
Ashley, H., and Haviland, G. (1950). “Bending vibrations of a pipe line containing flowing fluid.” J. Appl. Mech., 17(3), 229–232.
ASME. (2013a). “Gas transmission and distribution piping systems.” B31.8, New York.
ASME. (2013b). “Pipeline transportation systems for liquids and slurries.” B31.4, New York.
ASME. (2013c). “Process piping.” B31.3, New York.
AutoPIPE [Computer software]. Exton, PA, Bentley Systems.
CAESAR II [Computer software]. Huntsville, AL, Intergraph.
Chen, J. (2012). “Finite element analysis on stress intensity factors of piping branch junctions with cracks.” Master’s dissertation, East China Univ. of Science and Technology, Shanghai, China.
Chen, L. Q., Wu, S. J., Lu, H. F., Huang, K., Lv, Y. T., and Wu, J. L. (2014). “Stress analysis of buried gas pipeline traversing sliding mass.” Open Civ. Eng. J., 8(1), 239–243.
Fan, L. K. (2012). “Analysis of reciprocating compressor pipeline vibration and damping measures.” Master’s dissertation, East China Univ. of Science and Technology, Shanghai, China.
Fuller, C. R. (1981). “The effects of wall discontinuities on the propagation of flexural waves in cylindrical shells.” J. Sound Vib., 75(2), 207–228.
Fuller, C. R. (1984). “Monopole excitation of vibrations in an infinite cylindrical elastic shell filled with fluid.” J. Sound Vib., 96(1), 101–110.
Fuller, C. R., and Fahy, F. J. (1982). “Characteristics of wave propagation and energy distributions in cylindrical elastic shells filled with fluid.” J. Sound Vib., 81(4), 501–518.
George, M. (1998). “Pipe stress analysis theory guide.” COADE Inc., China Technical Service and Training Center, Beijing.
Gorman, D. G., Reese, J. M., and Zhang, Y. L. (2000). “Vibration of a flexible pipe conveying viscous pulsating fluid flow.” J. Sound Vib., 230(2), 379–392.
Guo, S. Q. (2014). “Random uncertainty modeling and vibration analysis of pipes conveying multi-phase fluid.” Masters dissertation,Zhejiang Univ., Hangzhou, China.
Harte, A. M., and McNamara, J. F. (1993). “Modeling procedures for the stress analysis of flexible pipe cross sections.” J. Offshore Mech. Archit., 115(1), 46–51.
Huang, K., Lu, H. F., Shen, K. R., Shu, H. W., and Wang, Y. J. (2013). “Study on buttresses distance of gas pipelines in the deviated well based on stress analysis method.” Adv. J. Food Sci. Technol., 5(9), 1249–1254.
Huang, K., Wu, S. J., Lu, H. F., Xian, Y., and Su, Q. W. (2012). “Stress analysis of the pipeline laid along the slope.” Nat. Gas Oil, 30(4), 1–4.
Huang, X. Y., and Weaver, D. S. (1991). “On the active control of shear layer oscillations across a cavity in the presence of pipeline acoustic resonance.” J. Fluid. Struct., 5(2), 207–219.
ISO. (1998). “Mechanical vibration-evaluation of machine vibration by measurements on non-rotating parts. Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min when measured in situ.” ISO 10816, Switzerland.
Jiang, X., Wang, T. Y., Sun, L., and Wu, X. (2013). “Stress analysis of unburied gas pipelines laid in high slopes.” Nat. Gas Oil, 31(6), 26–30.
Lavooij, C. S. W., and Tusseling, A. S. (1991). “Fluid-structure interaction in liquid-filled piping systems.” J. Fluid Struct., 5(5), 573–595.
Li, Y. P., Xian, G. D., Wang, W. B., Ma, Y. X., and Li, H. (2008). “Experiment specification research on pipeline stress and strain monitoring.” Oil Gas Storage Trans., 27(10), 21–23.
Liu, S. J., Jiang, N., and Zhen, L. (2008). “Study of stress measurement and explosion test of large thick wall 90° elbow.” Process Equip. Piping, 45(5), 47–50.
Niordson, F. I. (1953). Vibrations of a cylindrical tube containing flowing fluid, Kungliga Tekniska Hogskolans Handingar, Stockholm, Sweden, 73.
Ohtsubo, H., and Watanabe, O. (1977). “Flexibility and stress factors of pipe bends—An analysis by the finite ring method.” J. Pres. Ves. Technol., 99(2), 281–290.
Ohtsubo, H., and Watanabe, O. (1978). “Stress analysis of pipe bends by ring elements.” J. Pressure Vessel Technol., 100(1), 112–122.
Paidoussis, M. P., and Denise, J. P. (1971). “Flutter of cylindrical shells conveying fluid.” J. Sound Vib., 16(3), 459–461.
Paidoussis, M. P., and Denise, J. P. (1972). “Flutter of thin cylindrical shells conveying fluid.” J. Sound Vib., 20(1), 9–26.
Peng, L. C. (1978). “Stress analysis methods for underground pipelines.” Pipeline Industry, 47(5), 65–74.
Rajani, B. B., Robertson, P. K., and Morgenstern, N. R. (1995). “Simplified design methods for pipelines subject to transverse and longitudinal soil movements.” Can. Geotech. J., 32(2), 309–323.
Song, K. K. (2011). Industrial pipe stress analysis and engineering applications, Press of China Petrochemical, Beijing.
Sreejith, B., Jayaraj, K., Ganesan, N., Padmanabhan, C., Chellapandi, P., and Selvaraj, P. (2004). “Finite element analysis of fluid-structure interaction in pipeline systems.” Nucl. Eng. Des., 227(3), 313–322.
Wachel, J. C., Morton, S. J., and Atkins, K. E. (1990). “Piping vibration analysis.” Proc. 19th Turbomachinery Symp., Turbomachinery Laboratory, Dept. of Mechanical Engineering, Texas A&M Univ., College Station, TX, 119–134.
Wachel, J. C., Szenasi, F. R., and Denison, S. C. (1985). “Analysis of vibration and failure problems in reciprocating triplex pumps for oil pipelines.” Proc., Energy-Sources and Technology Conf. and Exhibition, Dallas, TX, 1–8.
Wang, L. Q., and He, Q. L. (2002). “Reciprocating compressor pipeline vibration analysis and engineering application.” Fluid Mach., 30(10), 28–31.
Watkins, R. K., and Anderson, L. R. (1999). Structural mechanics of buried pipes, CRC, London.
Wu, X. N., et al. (2014). “Stress analysis of gas pipelines at seismic belts based on the spectrum analysis.” J. Nat. Gas. Ind., 34(5), 152–157.
Wu, X. N., Shu, H. W., Zan, L. F., Jiang, X., Hu, D. H., and Xie, Z. (2013). “Stress analysis of a gas pipeline through shield tunnels under pressure test conditions.” J. Nat. Gas. Ind., 33(3), 1–5.
Wu, X. N., Xian, Y., Huang, K., Hu, M. L., and Shang, B. J. (2012). “The stress analysis of tunnel gas pipeline under operating situation.” Oil Gas Storage Trans., 31(12), 927–930.
Yang, H. T. (2007). “Stress research and application of large scale disk pistons in reciprocating compressors.” Master’s dissertation, Guangxi Univ., Nanning, China.
Yu, G. Q., and Lv, Z. H. (2008). “Load calculation and analysis of heating pipeline based on elastic center method.” Gas Heat, 28(12), 20–24.
Zhang, D. H., and Lv, Y. M. (1999). “Calculation of thermal stress intensity factor for semi-elliptical surface cracks of thin pipeline.” Oil Gas Storage Trans., 18(1), 13–17.
Zhang, H. J. (2000). “Vibration analysis and modification measures for piping of reciprocating pump.” Chem. Eng. Des., 10(4), 12–15.
Zhang, S. Y., and Ma, J. (2011). “The technical method for analyzing flow fluctuation and pipe vibration of reciprocating compressor.” Compressor Technol., (1), 22–25.
Zhang, Y. X., and Zhang, J. Z. (2006). “Development and trend of the reciprocating pump.” Mod. Manuf. Technol. Equip., (5), 19–20.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: May 19, 2014
Accepted: Feb 25, 2015
Published online: Jul 14, 2015
Discussion open until: Dec 14, 2015
Published in print: Feb 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.