Mineralogical and Microstructural Characterization of Cement-Stabilized Soft Soils Based on Quantitative Analyses
Publication: Journal of Materials in Civil Engineering
Volume 35, Issue 3
Abstract
The effects of cement dosage (percentage by dry soil weight) and initial moisture content () on cement stabilized soft estuarine clay were investigated by effective integration of multi-quantitative analyses, including quantitative X-ray diffraction (XRD), thermalgravimetric analysis (TGA), Brunauer-Emmett-Teller (BET) test and scanning electron microscopy (SEM) with image processing. These quantitative analyses are highly complementary, which greatly improved the scientificalness of this research. The results revealed that the strength development of cement stabilized soft estuarine clay with varying cement dosages, and initial moisture content was ascribed to the combined influence of both soil fabric improvement and cementation bonding enhancement. The increase of resulted in larger clay particle spaces, which can counteract the enhancement of soil structure due to the rising hydration products. The hydration degrees of samples with fixed cement dosage but different are quite similar, while clay particle spaces were enlarged with an increase of initial moisture content. Thus, the same quantity of hydration products may bind more soil particles when pores are small at lower , thus increasing unconfined compressive strength (UCS). Furthermore, BET and quantitative SEM results illustrate that hydration degree plays a dominant role in the development of intra-aggregate pores (), while affects inter-aggregate pores (0.2 μm–2 μm) more.
Practical Applications
Construction of buildings and infrastructure on marginal ground is becoming more common due to rapid urbanization and population growth. These phenomena has led to the utilization and development of coastal and estuarine plains surrounded by relatively softer and weaker soils that require improvement or strengthening before being constructed upon. One such ground improvement method is termed deep soil mixing (DSM), which involves mixing cement with the in situ weak soils to increase the soil strength so that the ground can sustain the weight of the buildings or infrastructure. This manuscript presents a novel interpretation based on the results from advanced laboratory tests to succinctly explain the complex chemical reactions that occur when cement is mixed with soft soils having varying characteristics. It is envisaged that this evidence-based explanation will help engineers and scientists bring to life land that was previously deemed unsuitable for construction.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The soft soil collection was supported by the Port of Brisbane Pty Ltd. The XRD, TGA, BET and SEM data were acquired from the Central Analytical Research Facility (CARF) at Queensland University of Technology (QUT). The authors would like to acknowledge Dr. Jess Wu, Ms. Elizabeth Graham, Dr. Tony Wang, Dr. Henry Spratt, Mr. Shane Russell, Ms. Karine Harumi Moromizato and Mr. Ashley Locke from CARF for their assistance in the characterizations.
References
Afrin, H. 2017. “A review on different types soil stabilization techniques.” Int. J. Transp. Eng. Technol. 3 (2): 19–24.
Alvarez, J. I., J. M. Fernández, I. Navarro-Blasco, A. Duran, and R. Sirera. 2013. “Microstructural consequences of nanosilica addition on aerial lime binding materials: Influence of different drying conditions.” Mater. Charact. 80 (Jun): 36–49. https://doi.org/10.1016/j.matchar.2013.03.006.
Amini, O., and M. Ghasemi. 2019. “Laboratory study of the effects of using magnesium slag on the geotechnical properties of cement stabilized soil.” Constr. Build. Mater. 223 (Oct): 409–420. https://doi.org/10.1016/j.conbuildmat.2019.07.011.
ASTM. 2016. Standard test method for unconfined compressive strength of cohesive soil. ASTM D2166/D2166M-16. West Conshohocken, PA: ASTM International.
ASTM. 2017. Standard practice for classification of soils for engineering purposes (unified soil classification system). ASTM D2487-17el. West Conshohocken, PA: ASTM.
Bai, X.-D., W.-C. Cheng, D. E. L. Ong, and G. Li. 2021. “Evaluation of geological conditions and clogging of tunneling using machine learning.” Geomech. Eng. 25 (1): 59–73. https://doi.org/10.12989/gae.2021.25.1.059.
Bell, F. G. 1996. “Lime stabilization of clay minerals and soils.” Eng. Geol. 42 (4): 223–237.
Bian, X., L. Zeng, X. Li, X. Shi, S. Zhou, and F. Li. 2021. “Fabric changes induced by super-absorbent polymer on cement–lime stabilized excavated clayey soil.” J. Rock Mech. Geotech. Eng. 13 (5): 1124–1135. https://doi.org/10.1016/j.jrmge.2021.03.006.
Bo, M. W., A. Arulrajah, and H. Nikraz. 2007. “Preloading and prefabricated vertical drains design for foreshore land reclamation projects: A case study.” Proc. Inst. Civ. Eng. Ground Improv. 11 (2): 67–76. https://doi.org/10.1680/grim.2007.11.2.67.
Bullard, J. W., H. M. Jennings, R. A. Livingston, A. Nonat, G. W. Scherer, J. S. Schweitzer, K. L. Scrivener, and J. J. Thomas. 2011. “Mechanisms of cement hydration.” Cem. Concr. Res. 41 (12): 1208–1223. https://doi.org/10.1016/j.cemconres.2010.09.011.
Cabrera, J., and M. F. Rojas. 2001. “Mechanism of hydration of the metakaolin–lime–water system.” Cem. Concr. Res. 31 (2): 177–182. https://doi.org/10.1016/S0008-8846(00)00456-7.
Chew, S. H., A. H. M. Kamruzzaman, and F. H. Lee. 2004. “Physicochemical and engineering behavior of cement treated clays.” J. Geotech. Geoenviron. Eng. 130 (7): 696–706. https://doi.org/10.1061/(ASCE)1090-0241(2004)130:7(696).
Choo, C. S., and D. E. L. Ong. 2020. “Assessment of non-linear rock strength parameters for the estimation of pipe-jacking forces. Part 2. Numerical modeling.” Eng. Geol. 265 (Feb): 105405. https://doi.org/10.1016/j.enggeo.2019.105405.
Choquette, M., M. A. Berube, and J. Locat. 1987. “Mineralogical and microtextural changes associated with lime stabilization of marine clays from eastern Canada.” Appl. Clay Sci. 2 (3): 215–232. https://doi.org/10.1016/0169-1317(87)90032-9.
Chrysochoou, M. 2014. “Investigation of the mineral dissolution rate and strength development in stabilized soils using quantitative X-ray diffraction.” J. Mater. Civ. Eng. 26 (2): 288–295. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000814.
Ciancio, D., C. T. S. Beckett, and J. A. H. Carraro. 2014. “Optimum lime content identification for lime-stabilised rammed earth.” Constr. Build. Mater. 53: 59–65.
De La Torre, A. G., S. Bruque, and M. A. Aranda. 2001. “Rietveld quantitative amorphous content analysis.” J. Appl. Crystallogr. 34 (2): 196–202. https://doi.org/10.1107/S0021889801002485.
Dinnebier, R. E., A. Leineweber, and J. S. Evans. 2018. Rietveld refinement. Berlin: de Gruyter.
Eisazadeh, A., and H. Eisazadeh. 2015. “N2-BET surface area and FESEM studies of lime-stabilized montmorillonitic and kaolinitic soils.” Environ. Earth Sci. 74 (1): 377–384. https://doi.org/10.1007/s12665-015-4044-0.
Eisazadeh, A., K. A. Kassim, and H. Nur. 2013. “Morphology and BET surface area of phosphoric acid stabilized tropical soils.” Eng. Geol. 154 (Feb): 36–41. https://doi.org/10.1016/j.enggeo.2012.12.011.
El-Jazairi, B., and J. M. Illston. 1980. “The hydration of cement paste using the semi-isothermal method of derivative thermogravimetry.” Cem. Concr. Res. 10 (3): 361–366. https://doi.org/10.1016/0008-8846(80)90111-8.
Goldschmidt, V. M., T. Barth, G. Lunde, and W. Zachariasen. 1926. Geochemische verteilungsgesetze der elemente VII. Skrifter der Norske Videnskaps Akademi Klasse 1. Matematisk Naurvidenskaplig Klasse. Stanford, CA: Stanford Univ.
Griffiths, F. J., and R. C. Joshi. 1989. “Change in pore size distribution due to consolidation of clays.” Geotechnique 39 (1): 159–167. https://doi.org/10.1680/geot.1989.39.1.159.
Horpibulsuk, S., N. Miura, and T. S. Nagaraj. 2003. “Assessment of strength development in cement-admixed high water content clays with Abrams’ law as a basis.” Geotechnique 53 (4): 439–444. https://doi.org/10.1680/geot.2003.53.4.439.
Horpibulsuk, S., N. Miura, and T. S. Nagaraj. 2005. “Clay-water/ cement ratio identity for cement admixed soft clays.” J. Geotech. Geoenviron. Eng. 131 (2): 187–192. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:2(187).
Horpibulsuk, S., R. Rachan, A. Chinkulkijniwat, Y. Raksachon, and A. Suddeepong. 2010. “Analysis of strength development in cement-stabilized silty clay from microstructural considerations.” Constr. Build. Mater. 24 (10): 2011–2021. https://doi.org/10.1016/j.conbuildmat.2010.03.011.
Horpibulsuk, S., R. Rachan, and A. Suddeepong. 2011. “Assessment of strength development in blended cement admixed Bangkok clay.” Constr. Build. Mater. 25 (4): 1521–1531. https://doi.org/10.1016/j.conbuildmat.2010.08.006.
Latifi, N., S. Horpibulsuk, C. L. Meehan, M. Z. Abd Majid, M. M. Tahir, and E. T. Mohamad. 2017. “Improvement of problematic soils with biopolymer—An environmentally friendly soil stabilizer.” J. Mater. Civ. Eng. 29 (2): 04016204. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001706.
Leong, H. Y., D. E. L. Ong, J. G. Sanjayan, and A. Nazari. 2015. “A genetic programming predictive model for parametric study of factors affecting strength of geopolymers.” RSC Adv. 5 (104): 85630–85639. https://doi.org/10.1039/C5RA16286F.
Leong, H. Y., D. E. L. Ong, J. G. Sanjayan, and A. Nazari. 2016a. “The effect of different Na2O and K2O ratios of alkali activator on compressive strength of fly ash based-geopolymer.” Constr. Build. Mater. 106 (Mar): 500–511. https://doi.org/10.1016/j.conbuildmat.2015.12.141.
Leong, H. Y., D. E. L. Ong, J. G. Sanjayan, and A. Nazari. 2016b. “Suitability of Sarawak and Gladstone fly ash to produce geopolymers: A physical, chemical, mechanical, mineralogical and microstructural analysis.” Ceram. Int. 42 (8): 9613–9620. https://doi.org/10.1016/j.ceramint.2016.03.046.
Leong, H. Y., D. E. L. Ong, J. G. Sanjayan, and A. Nazari. 2018a. “Strength development of soil-fly ash geopolymer: Assessment of soil, fly ash, alkali activators, and water.” J. Mater. Civ. Eng. 30 (8): 04018171. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002363.
Leong, H. Y., D. E. L. Ong, J. G. Sanjayan, A. Nazari, and S. M. Kueh. 2018b. “Effects of significant variables on compressive strength of soil-fly ash geopolymer: Variable analytical approach based on neural networks and genetic programming.” J. Mater. Civ. Eng. 30 (7): 04018129. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002246.
Liu, C., B. Shi, J. Zhou, and C. Tang. 2011. “Quantification and characterization of microporosity by image processing, geometric measurement and statistical methods: Application on SEM images of clay materials.” Appl. Clay Sci. 54 (1): 97–106. https://doi.org/10.1016/j.clay.2011.07.022.
Liu, Y., Y. J. Jiang, H. Xiao, and F. H. Lee. 2017. “Determination of representative strength of deep cement-mixed clay from core strength data.” Géotechnique 67 (4): 350–364. https://doi.org/10.1680/jgeot.16.P.105.
Liu, Y., Z. Liu, E. Oh, and D. E. L. Ong. 2021. “Strength and microstructural assessment of reconstituted and stabilised soft soils with varying silt contents.” Geosciences 11 (8): 302. https://doi.org/10.3390/geosciences11080302.
Liu, Y., D. E. L. Ong, E. Oh, Z. Liu, and R. Hughes. 2022. “Sustainable cementitious blends for strength enhancement of dredged mud in Queensland, Australia.” Geotech. Res. 9 (2): 65–82. https://doi.org/10.1680/jgere.21.00046.
Liu, Z., Y. Liu, M. Bolton, D. E. L. Ong, and E. Oh. 2020. “Effect of cement and bentonite mixture on the consolidation behavior of soft estuarine soils.” GEOMATE J. 18 (65): 49–54.
Matschei, T., B. Lothenbach, and F. P. Glasser. 2007. “The AFm phase in Portland cement.” Cem. Concr. Res. 37 (2): 118–130. https://doi.org/10.1016/j.cemconres.2006.10.010.
Nochaiya, T., W. Wongkeo, K. Pimraksa, and A. Chaipanich. 2010. “Microstructural, physical, and thermal analyses of Portland cement–fly ash–calcium hydroxide blended pastes.” J. Therm. Anal. Calorim. 100 (1): 101–108. https://doi.org/10.1007/s10973-009-0491-8.
Omoregie, A. I., G. Khoshdelnezamiha, N. Senian, D. E. L. Ong, and P. M. Nissom. 2017. “Experimental optimisation of various cultural conditions on urease activity for isolated Sporosarcina pasteurii strains and evaluation of their biocement potentials.” Ecol. Eng. 109 (Dec): 65–75. https://doi.org/10.1016/j.ecoleng.2017.09.012.
Omoregie, A. I., E. A. Palombo, D. E. L. Ong, and P. M. Nissom. 2019. “Biocementation of sand by Sporosarcina pasteurii strain and technical-grade cementation reagents through surface percolation treatment method.” Constr. Build. Mater. 228 (Dec): 116828. https://doi.org/10.1016/j.conbuildmat.2019.116828.
Omoregie, A. I., E. A. Palombo, D. E. L. Ong, and P. M. Nissom. 2020. “A feasible scale-up production of Sporosarcina pasteurii using custom-built stirred tank reactor for in-situ soil biocementation.” Biocatal. Agric. Biotechnol. 24 (Mar): 101544. https://doi.org/10.1016/j.bcab.2020.101544.
Omoregie, A. I., N. Senian, P. Y. Li, L. H. Ngu, D. E. L. Leong, I. R. H. Ginjom, and P. M. Nissom. 2016. “Ureolytic bacteria isolated from Sarawak limestone caves show high urease enzyme activity comparable to that of Sporosarcina pasteurii (DSM 33).” Malaysian J. Microbiol. 12 (6): 463–470.
Ong, D. E. L. 2008. “Benchmarking of FEM technique involving deep excavation, pile-soil interaction and embankment construction.” In Proc., 12th Int. Conf. of International Association for Computer Methods and Advanced in Geomechanics (IACMAG), 1–6. New York: Curran Associates.
Ong, D. E. L., and C. Choo. 2011. “Sustainable construction of a bored pile foundation system in erratic phyllite.” In Proc., 2011 ASEAN-Australian Engineering Congress, 50–65. Barton, Australia: Engineers Australia.
Ong, D. E. L., C. F. Leung, Y. K. Chow, and T. G. Ng. 2015. “Severe damage of a pile group due to slope failure.” J. Geotech. Geoenviron. Eng. 141 (5): 04015014. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001294.
Ong, D. E. L., Y. S. Sim, and C. F. Leung. 2018. “Performance of field and numerical back-analysis of floating stone columns in soft clay considering the influence of dilatancy.” Int. J. Geomech. 18 (10): 04018135. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001261.
Ong, D. E. L., D. Yang, and S. Phang. 2006. “Comparison of finite element modelling of a deep excavation using SAGE-CRISP and PLAXIS.” In Proc., 2006 Int. Conf. Deep Excavations, 50–63. Singapore: Land Transport Authority and Tunneling & Underground Construction Society.
Peerun, M. I., D. E. L. Ong, and C. S. Choo. 2019. “Interpretation of geomaterial behavior during shearing aided by PIV technology.” J. Mater. Civ. Eng. 31 (9): 04019195. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002834.
Peerun, M. I., D. E. L. Ong, C. S. Choo, and W. C. Cheng. 2020. “Effect of interparticle behavior on the development of soil arching in soil-structure interaction.” Tunnelling Underground Space Technol. 106 (Dec): 103610. https://doi.org/10.1016/j.tust.2020.103610.
Pham, V. N., H. D. Do, E. Oh, and D. E. L. Ong. 2021. “Prediction of unconfined compressive strength of cement-stabilized sandy soil in Vietnam using artificial neural networks (ANNs) model.” Int. J. Geotech. Eng. 15 (9): 1177–1187. https://doi.org/10.1080/19386362.2020.1862539.
Pu, S., Z. Zhu, L. Zhao, W. Song, Y. Wan, W. Huo, H. Wang, K. Yao, and L. Hu. 2020. “Microstructural properties and compressive strength of lime or/and cement solidified silt: A multi-scale study.” Bull. Eng. Geol. Environ. 79 (10): 5141–5159. https://doi.org/10.1007/s10064-020-01910-y.
Riqing, X., D. Weiwen, L. J. Xubo, Z. Xuegui, X. Liyang, and L. Jianyang. 2015. “Quantitative analysis of soft clay three-dimensional porsity based on SEM image information.” J. Earth Sci. Environ. 3: 104–110.
Sanjuán, M. A., and C. Argiz. 2012. “The new European standard on common cements specifications EN 197-1: 2011.” Materiales de Construcción 62 (307): 425–430. https://doi.org/10.3989/mc.2012.07711.
Sasanian, S., and T. A. Newson. 2014. “Basic parameters governing the behaviour of cement-treated clays.” Soils Found. 54 (2): 209–224. https://doi.org/10.1016/j.sandf.2014.02.011.
Snellings, R., L. Machiels, G. Mertens, and J. Elsen. 2010. “Rietveld Refinement strategy for quantitative phase analysis of partially amorphous zeolitized tuffaceous rocks.” Geol. Belgica 133 (3): 183–196.
Sukmak, P., S. Horpibulsuk, and S. L. Shen. 2013. “Strength development in clay-fly ash geopolymer.” Constr. Build. Mater. 40 (Mar): 566–574. https://doi.org/10.1016/j.conbuildmat.2012.11.015.
Sun, J., E. Oh, and D. E. L. Ong. 2021. “Influence of degree of saturation (DOS) on dynamic behavior of unbound granular materials.” Geosciences 11 (2): 89. https://doi.org/10.3390/geosciences11020089.
Tabet, W. E., A. B. Cerato, A. S. Elwood Madden, and R. E. Jentoft. 2018. “Characterization of hydration products’ formation and strength development in cement-stabilized kaolinite using TG and XRD.” J. Mater. Civ. Eng. 30 (10): 04018261. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002454.
Terzaghi, K. 1925. Erdbaumechanik auf bodenphysikalischer Grundlage. F. Deuticke. Wien: G. Gistel.
Tian, J., and Q. Guo. 2014. “Thermal decomposition of hydrocalumite over a temperature range of 400–1500°C and its structure reconstruction in water.” J. Chem. 2014 (Jan). https://doi.org/10.1155/2014/454098.
Wang, S., L. Gainey, D. Baxter, X. Wang, I. D. Mackinnon, and Y. Xi. 2021. “Thermal behaviours of clay mixtures during brick firing: A combined study of in-situ XRD, TGA and thermal dilatometry.” Constr. Build. Mater. 299 (Sep): 124319. https://doi.org/10.1016/j.conbuildmat.2021.124319.
Wang, Y., M. Duc, Y. J. Cui, A. M. Tang, N. Benahmed, W. J. Sun, and W. M. Ye. 2017. “Aggregate size effect on the development of cementitious compounds in a lime-treated soil during curing.” Appl. Clay Sci. 136 (Feb): 58–66. https://doi.org/10.1016/j.clay.2016.11.003.
Wu, Z., Y. Deng, S. Liu, Q. Liu, Y. Chen, and F. Zha. 2016. “Strength and micro-structure evolution of compacted soils modified by admixtures of cement and metakaolin.” Appl. Clay Sci. 127–128 (Jul): 44–51. https://doi.org/10.1016/j.clay.2016.03.040.
Xu, R. Q., L. Y. Xu, Y. W. Deng, and Y. H. Zhu. 2015. “Experimental study on soft clay contact area based on SEM and IPP.” J. Zhejiang Univ. Eng. Sci. 49 (8): 1417–1425.
Yao, K., Y. Pan, L. Jia, J. T. Yi, J. Hu, and C. Wu. 2020. “Strength evaluation of marine clay stabilized by cementitious binder.” Mar. Georesour. Geotechnol. 38 (6): 730–743. https://doi.org/10.1080/1064119X.2019.1615583.
Zhang, X., and Z. Zhu. 2018. “Study on the relationship between microstructure and strength of stabilized/solidified silt.” Int. J. Struct. Civ. Eng. Res 7 (1): 65–71. https://doi.org/10.18178/ijscer.7.1.65-71.
Zhao, Y., A. Taheri, A. Soltani, M. Karakus, and A. Deng. 2019. “Strength development and strain localization behavior of cemented paste backfills using Portland cement and fly ash.” Materials (Basel) 12 (20): 3282. https://doi.org/10.3390/ma12203282.
Zhou, C. Y., and C. M. Mu. 2005. “Relationship between micro-structural characters of fracture surface and strength of soft clay.” Chin. J. Geotech. Eng. 27 (10): 1136–1141.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Nov 5, 2021
Accepted: Jul 6, 2022
Published online: Dec 30, 2022
Published in print: Mar 1, 2023
Discussion open until: May 30, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.