Effective Utilization of Chopped Basalt Fiber and Pozzolana Slurry TRCA for Sustainable Recycled Structural Concrete with Improved Fire Resistance
Publication: Journal of Materials in Civil Engineering
Volume 35, Issue 3
Abstract
In recent times, the employment of recycled aggregate concrete (RAC) for sustainable infrastructure development has enticed special interest from the research community owing to a greater emphasis on resource conservation and environmental protection. To apply such concrete in the modern-day construction industry, in-depth knowledge and thorough understanding of its fire resistance is imperative and an urgent need at the present time. Hence, this experimental study investigates the effect of elevated temperatures (25°C–800°C) on residual mechanical, physical, and microstructure performances of RAC strengthened via the coupling effect of chopped basalt fiber (BF) and pozzolana slurry treated recycled concrete aggregate (TRCA). To mimic real building fire conditions, concrete test specimens were heated to a specific target temperature in a controlled heating manner, and then their performance was assessed in terms of residual properties including compressive strength, splitting tensile strength, flexural strength, mass loss, physical appearance, and microstructure. Overall, the test findings revealed significant enhancement in residual properties of modified recycled concrete prepared by combined utilization of BF and TRCA. Moreover, in comparison with a reference sample, the BF-based recycled concrete demonstrated lower mass loss and surface degradation, especially beyond 400°C, that is attributed to the excellent thermal stability and reinforcing effect of BF. The microstructure observation evidenced improved matrix quality that contained better interfacial transition zones alongside added nucleation sites by BF. Lastly, based on the experimental data, simplified numerical relationships are established that will help predict the postfire performance of BF-reinforced sustainable concrete.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The work described in this paper was supported by the City University of Hong Kong (Project No. ARG 9667238) and the National Natural Science Foundation of China through a research grant awarded to the City University of Hong Kong Shenzhen Research Institute (Project No. 12072165).
References
Adesina, A., and S. Das. 2020. “Evaluation of the durability properties of engineered cementitious composites incorporating recycled concrete as aggregate.” J. Mater. Civ. Eng. 33 (2): 04020439. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003563.
Ahmed, W., and C. W. Lim. 2020. “Production of sustainable and structural fiber reinforced recycled aggregate concrete with improved fracture properties: A review.” J. Cleaner Prod. 279 (12): 1–42.
Ahmed, W., and C. W. Lim. 2021. “Coupling effect assessment of vacuum based pozzolana slurry encrusted recycled aggregate and basalt fiber on mechanical performance of fiber reinforced concrete.” Constr. Build. Mater. 300 (Jan): 124032. https://doi.org/10.1016/j.conbuildmat.2021.124032.
Aslani, F., and J. Kelin. 2018. “Assessment and development of high-performance fibre-reinforced lightweight self-compacting concrete including recycled crumb rubber aggregates exposed to elevated temperatures.” J. Cleaner Prod. 200 (Jan): 1009–1025. https://doi.org/10.1016/j.jclepro.2018.07.323.
ASTM. 2016. Standard specification for concrete aggregates. West Conshohocken, PA: ASTM.
Baloch, W. L., R. A. Khushnood, S. A. Memon, W. Ahmed, and S. Ahmad. 2018. “Effect of elevated temperatures on mechanical performance of normal and lightweight concretes reinforced with carbon nanotubes.” Fire Technol. 54 (5): 1331–1367.
Baloch, W. L., H. Siad, M. Lachemi, and M. Sahmaran. 2021. “A review on the durability of concrete-to-concrete bond in recent rehabilitated structures.” J. Build. Eng. 44 (Jun): 103315. https://doi.org/10.1016/j.jobe.2021.103315.
Beatriz da Silva, J., M. Pepe, and R. D. Toledo Filho. 2020. “High temperatures effect on mechanical and physical performance of normal and high strength recycled aggregate concrete.” Fire Saf. J. 117 (Aug): 20–25.
Bui, N. K., T. Satomi, and H. Takahashi. 2018. “Effect of mineral admixtures on properties of recycled aggregate concrete at high temperature.” Constr. Build. Mater. 184 (Dec): 361–373. https://doi.org/10.1016/j.conbuildmat.2018.06.237.
Deák, T., and T. Czigány. 2009. “Chemical composition and mechanical properties of basalt and glass fibers: A comparison.” Text. Res. J. 79 (7): 645–651. https://doi.org/10.1177/0040517508095597.
Ding, T., J. Xiao, and V. W. Y. Tam. 2016. “A closed-loop life cycle assessment of recycled aggregate concrete utilization in China.” Waste Manage. 56 (Oct): 367–375. https://doi.org/10.1016/j.wasman.2016.05.031.
Ebead, U., D. Lau, F. Lollini, A. Nanni, P. Suraneni, and T. Yu. 2022. “A review of recent advances in the science and technology of seawater-mixed concrete.” Cem. Concr. Res. 152 (Feb): 106666. https://doi.org/10.1016/j.cemconres.2021.106666.
Khaliq, W., and A. Taimur. 2018. “Mechanical and physical response of recycled aggregates high-strength concrete at elevated temperatures.” Fire Saf. J. 96 (May): 203–214.
Khushnood, R. A., Z. A. Qureshi, N. Shaheen, and S. Ali. 2020. “Bio-mineralized self-healing recycled aggregate concrete for sustainable infrastructure.” Sci. Total Environ. 703 (2): 135007.
Malik, M., S. K. Bhattacharyya, and S. V. Barai. 2020. “Microstructural changes in concrete: Postfire scenario.” J. Mater. Civ. Eng. 33 (2): 04020462. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003449.
Neville, A. M. 1995. Properties of concrete. 4th ed. London: Longman.
Novak, J., and A. Kohoutkova. 2018. “Mechanical properties of concrete composites subject to elevated temperature.” Fire Saf. J. 95 (Jan): 66–76.
Puthussery, J. V., R. Kumar, and A. Garg. 2017. “Evaluation of recycled concrete aggregates for their suitability in construction activities: An experimental study.” Waste Manage. 60 (Feb): 270–276. https://doi.org/10.1016/j.wasman.2016.06.008.
Saberian, M., L. Shi, A. Sidiq, J. Li, S. Setunge, and C. Q. Li. 2019. “Recycled concrete aggregate mixed with crumb rubber under elevated temperature.” Constr. Build. Mater. 222 (Oct): 119–129. https://doi.org/10.1016/j.conbuildmat.2019.06.133.
Sarhat, S. R., and E. G. Sherwood. 2013. “Residual mechanical response of recycled aggregate concrete after exposure to elevated temperatures.” J. Mater. Civ. Eng. 25 (11): 1721–1730. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000719.
Shi, C., Z. Wu, Z. Cao, T. C. Ling, and J. Zheng. 2018. “Performance of mortar prepared with recycled concrete aggregate enhanced by and pozzolan slurry.” Cem. Concr. Compos. 86 (Feb): 130–138. https://doi.org/10.1016/j.cemconcomp.2017.10.013.
Sim, J., C. Park, and D. Y. Moon. 2005. “Characteristics of basalt fiber as a strengthening material for concrete structures.” Composites, Part B 36 (6–7): 504–512. https://doi.org/10.1016/j.compositesb.2005.02.002.
Singh, R. B., and B. Singh. 2021. “Rheology of high-volume fly ash self-compacting recycled aggregate concrete.” J. Mater. Civ. Eng. 33 (10): 04021280. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003907.
Structural Fire Protection. 1992. Structural fire protection. Reston, VA: ASCE.
Tanyildizi, H. 2013. “Variance analysis of crack characteristics of structural lightweight concrete containing silica fume exposed to high temperature.” Constr. Build. Mater. 47 (Oct): 1154–1159. https://doi.org/10.1016/j.conbuildmat.2013.05.060.
Velardo, P., I. F. Sáez del Bosque, A. Matías, M. I. Sánchez de Rojas, and C. Medina. 2021. “Properties of concretes bearing mixed recycled aggregate with polymer-modified surfaces.” J. Build. Eng. 38 (Sep): 102211.
Verma, A., V. S. Babu, and A. Srinivasan. 2021. “Strength and durability properties of treated recycled aggregate concrete by soaking and mechanical grinding method: Influence of processing technique.” J. Mater. Civ. Eng. 33 (10): 04021286. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003908.
Vieira, J. P. B., J. R. Correia, and J. De Brito. 2011. “Post-fire residual mechanical properties of concrete made with recycled concrete coarse aggregates.” Cem. Concr. Res. 41 (5): 533–541. https://doi.org/10.1016/j.cemconres.2011.02.002.
Wang, D., Y. Ju, H. Shen, and L. Xu. 2019. “Mechanical properties of high performance concrete reinforced with basalt fiber and polypropylene fiber.” Constr. Build. Mater. 197 (Oct): 464–473. https://doi.org/10.1016/j.conbuildmat.2018.11.181.
Wang, J., J. Xie, J. He, M. Sun, J. Yang, and L. Li. 2020. “Combined use of silica fume and steel fibre to improve fracture properties of recycled aggregate concrete exposed to elevated temperature.” J. Mater. Cycles Waste Manage. 22 (3): 862–877. https://doi.org/10.1007/s10163-020-00990-y.
Wang, Y., J. Liu, P. Zhu, H. Liu, C. Wu, and J. Zhao. 2021. “Investigation of adhered mortar content on recycled aggregate using image analysis method.” J. Mater. Civ. Eng. 33 (9): 04021225. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003864.
Wei, W., Z. Shao, P. Zhang, H. Zhang, J. Cheng, and Y. Yuan. 2021. “Thermally assisted liberation of concrete and aggregate recycling: Comparison between microwave and conventional heating.” J. Mater. Civ. Eng. 33 (12): 04021370. https://doi.org/10.1061/(ASCE)MT.1943-5533.0004007.
Xie, J., Z. Zhang, Z. Lu, and M. Sun. 2018. “Coupling effects of silica fume and steel-fiber on the compressive behaviour of recycled aggregate concrete after exposure to elevated temperature.” Constr. Build. Mater. 184 (12): 752–764. https://doi.org/10.1016/j.conbuildmat.2018.07.035.
Xuan, D., B. Zhan, and C. S. Poon. 2018. “Thermal and residual mechanical profile of recycled aggregate concrete prepared with carbonated concrete aggregates after exposure to elevated temperatures.” Fire Mater. 42 (1): 134–142. https://doi.org/10.1002/fam.2465.
Zega, C. J., and A. A. Di Maio. 2006. “Recycled concrete exposed to high temperatures.” Mag. Concr. Res. 58 (10): 675–682. https://doi.org/10.1680/macr.2006.58.10.675.
Zegardło, B., M. Szeląg, and P. Ogrodnik. 2018. “Concrete resistant to spalling made with recycled aggregate from sanitary ceramic wastes—The effect of moisture and porosity on destructive processes occurring in fire conditions.” Constr. Build. Mater. 173 (Apr): 58–68. https://doi.org/10.1016/j.conbuildmat.2018.04.030.
Zhang, B. 2011. “Effects of moisture evaporation (weight loss) on fracture properties of high performance concrete subjected to high temperatures.” Fire Saf. J. 46 (8): 543–549.
Zhao, H., F. Liu, and H. Yang. 2020. “Residual compressive response of concrete produced with both coarse and fine recycled concrete aggregates after thermal exposure.” Constr. Build. Mater. 244 (12): 118397. https://doi.org/10.1016/j.conbuildmat.2020.118397.
Zhao, M., Y. Wang, D. E. Lehman, Y. Geng, and C. W. Roeder. 2021. Response and modeling of steel tubes filled with recycled fine and coarse aggregate concretes under long-term loading. Reston, VA: ASCE. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003128.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Dec 29, 2021
Accepted: Jun 2, 2022
Published online: Dec 16, 2022
Published in print: Mar 1, 2023
Discussion open until: May 16, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.