A Mixture Design of Microconcrete Containing Quartz and Discarded HDPE Particles: Case Study
Publication: Journal of Materials in Civil Engineering
Volume 35, Issue 3
Abstract
This work investigated the feasibility of replacing quartz aggregates with discarded high-density polyethylene (HDPE) particles in a cementitious matrix for secondary structural applications in civil construction. A mixture design technique was used to assess the effect of the constituents on the physical-mechanical properties of composites, such as density, water absorption, flexural strength, compressive strength, and dynamic modulus. The aggregate/cement ratio ranged from 3.76 to 5.25, and the water/cement ratio was kept constant at 0.5, whereas a minimum of 30 vol% HDPE particles was considered in the system. The optimized responses and fractions were determined by considering five different scenarios through the statistical method desirability. The gradual replacement of quartz aggregates by HDPE led to a more porous material, increasing water absorption and reducing mechanical properties. However, these composites exhibited a less rigid characteristic, revealing a less brittle failure mode. Whereas the optimized density was obtained for the minimum matrix and maximum HDPE fractions, the optimal response for the mechanical properties and water absorption presented an opposite behavior, that is, maximum cement matrix fraction and minimum HDPE fraction. Multiobjective optimization proved to be a promising technique for identifying the optimal mix of recycled microconcrete for a given application.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author on reasonable request.
Acknowledgments
The authors acknowledge the Brazilian Research Agencies, CNPq (PQ - 309885/2019-1) and FAPEMIG (PPM-00075-17), for the financial support provided.
References
Alfahdawi, I., S. A. Osman, R. Hamid, and A. I. Al-Hadithi. 2019. “Influence of PET wastes on the environment and high strength concrete properties exposed to high temperatures.” Constr. Build. Mater. 225 (Nov): 358–370. https://doi.org/10.1016/j.conbuildmat.2019.07.214.
Arulrajah, A., E. Yaghoubi, Y. C. Wong, and S. Horpibulsuk. 2017. “Recycled plastic granules and demolition wastes as construction materials: Resilient moduli and strength characteristics.” Constr. Build. Mater. 147 (Aug): 639–647. https://doi.org/10.1016/j.conbuildmat.2017.04.178.
ASTM. 2002. Standard test method for flexural strength of hydraulic-cement mortars. ASTM C348-02. West Conshohocken, PA: ASTM.
Badache, A., A. S. Benosman, Y. Senhadji, and M. Mouli. 2018. “Thermo-physical and mechanical characteristics of sand-based lightweight composite mortars with recycled high-density polyethylene (HDPE).” Constr. Build. Mater. 163 (Feb): 40–52. https://doi.org/10.1016/j.conbuildmat.2017.12.069.
Basha, S. I., M. R. Ali, S. U. Al-Dulaijan, and M. Maslehuddin. 2020. “Mechanical and thermal properties of lightweight recycled plastic aggregate concrete.” J. Build. Eng. 32 (Nov): 101710. https://doi.org/10.1016/j.jobe.2020.101710.
BEACH (Beach Environmental Awareness Campaign Hawaii). 2022. “Recycling plastic caps and lids.” Accessed February 17, 2022. http://www.b-e-a-c-h.org/recycling.html.
Belmokaddem, M., A. Mahi, Y. Senhadji, and B. Y. Pekmezci. 2020. “Mechanical and physical properties and morphology of concrete containing plastic waste as aggregate.” Constr. Build. Mater. 257 (Oct): 119559. https://doi.org/10.1016/j.conbuildmat.2020.119559.
Bhardwaj, B., and P. Kumar. 2017. “Waste foundry sand in concrete: A review.” Constr. Build. Mater. 156 (Dec): 661–674. https://doi.org/10.1016/j.conbuildmat.2017.09.010.
Bijaisoradat, O., M. Luttapreecha, and H. Manuspiya. 2020. “Eco composites with synergistic combinations of natural rubber latex and wood flour toughened recycled HDPE.” Mater. Today Commun. 25 (Dec): 101483. https://doi.org/10.1016/j.mtcomm.2020.101483.
BSI (British Standards Institution). 1986. Testing concrete. Recommendations for measurement of velocity of ultrasonic pulses in concrete. BS 1881-203. London: BSI.
BSI (British Standards Institution). 2012a. Ceramic tiles, determination of modulus of rupture and breaking strength. BS EN ISO 10545. London: BSI.
BSI (British Standards Institution). 2012b. Testing hardened concrete. Shape, dimensions and other requirements for specimens and moulds. BS EN 12390. London: BSI.
Chen, Y., L. Xu, W. Xuan, and Z. Zhou. 2019. “Experimental study on four-point cyclic bending behaviours of concrete with high density polyethylene granules.” Constr. Build. Mater. 201 (Mar): 691–701. https://doi.org/10.1016/j.conbuildmat.2018.12.191.
Cornell, J. A. 2011. A primer on experiments with mixtures. New York: Wiley.
Da Silva, T. R., A. De Azevedo, D. Cecchin, M. T. Marvila, M. Amran, R. Fediuk, N. Vatin, M. Karelina, S. Klyuev, and M. Szelag. 2021. “Application of plastic wastes in construction materials: A review using the concept of life-cycle assessment in the context of recent research for future perspectives.” Materials (Basel, Switzerland) 14 (13): 3549. https://doi.org/10.3390/ma14133549.
Dissanayake, D. M. K. W., C. Jayasinghe, and M. T. R. Jayasinghe. 2017. “A comparative embodied energy analysis of a house with recycled expanded polystyrene (EPS) based foam concrete wall panels.” Energy Build. 135 (Jan): 85–94. https://doi.org/10.1016/j.enbuild.2016.11.044.
Ersan, Y. C., S. Gulcimen, T. N. Imis, O. Saygin, and N. Uzal. 2020. “Life cycle assessment of lightweight concrete containing recycled plastics and fly ash.” Eur. J. Environ. Civ. Eng. 26 (7): 2722–2735. https://doi.org/10.1080/19648189.2020.1767216.
Faraj, R. H., A. F. H. Sherwani, and A. Daraei. 2019. “Mechanical, fracture and durability properties of self-compacting high strength concrete containing recycled polypropylene plastic particles.” J. Build. Eng. 25 (Sep): 100808. https://doi.org/10.1016/j.jobe.2019.100808.
Francioso, V., C. Moro, A. Castillo, and M. Velay-Lizancos. 2020. “Effect of elevated temperature on flexural behavior and fibers-matrix bonding of recycled PP fiber-reinforced cementitious composite.” Constr. Build. Mater. 269 (Feb): 121243. https://doi.org/10.1016/j.conbuildmat.2020.121243.
Geyer, R., J. R. Jambeck, and K. L. Law. 2017. “Production, use, and fate of all plastics ever made.” Sci. Adv. 3 (7): e1700782. https://doi.org/10.1126/sciadv.1700782.
Gu, L., and T. Ozbakkaloglu. 2016. “Use of recycled plastics in concrete: A critical review.” Waste Manage. (Oxford) 51 (May): 19–42. https://doi.org/10.1016/j.wasman.2016.03.005.
Hannawi, K., S. Kamali-Bernard, and W. Prince. 2010. “Physical and mechanical properties of mortars containing PET and PC waste aggregates.” Waste Manage. (Oxford) 30 (11): 2312–2320. https://doi.org/10.1016/j.wasman.2010.03.028.
Jassim, A. K. 2017. “Recycling of polyethylene waste to produce plastic cement.” Procedia Manuf. 8 (Jan): 635–642. https://doi.org/10.1016/j.promfg.2017.02.081.
Kumar, S., A. K. Panda, and R. K. Singh. 2011. “A review on tertiary recycling of high-density polyethylene to fuel.” Resour. Conserv. Recycl. 55 (11): 893–910. https://doi.org/10.1016/j.resconrec.2011.05.005.
Limami, H., I. Manssouri, K. Cherkaoui, M. Saadaoui, and A. Khaldoun. 2020. “Thermal performance of unfired lightweight clay bricks with HDPE & PET waste plastics additives.” J. Build. Eng. 30 (Jul): 101251. https://doi.org/10.1016/j.jobe.2020.101251.
Mañosa, J., J. Formosa, J. Giro-Paloma, A. Maldonado-Alameda, M. J. Quina, and J. M. Chimenos. 2020. “Valorisation of water treatment sludge for lightweight aggregate production.” Constr. Build. Mater. 269 (Feb): 121335. https://doi.org/10.1016/j.conbuildmat.2020.121335.
Martínez, A. L. C., G. M. Barrera, C. E. B. Díaz, L. I. A. Córdoba, F. U. Núñez, and D. J. D. Hernández. 2019. “Recycled polycarbonate from electronic waste and its use in concrete: Effect of irradiation.” Constr. Build. Mater. 201 (Mar): 778–785. https://doi.org/10.1016/j.conbuildmat.2018.12.147.
Merlo, A., L. Lavagna, D. Suarez-Riera, and M. Pavese. 2020. “Mechanical properties of mortar containing waste plastic (PVC) as aggregate partial replacement.” Case Stud. Constr. Mater. 13 (Dec): e00467. https://doi.org/10.1016/j.cscm.2020.e00467.
Mo, K. H., B. S. Thomas, S. P. Yap, F. Abutaha, and C. G. Tan. 2020. “Viability of agricultural wastes as substitute of natural aggregate in concrete: A review on the durability-related properties.” J. Cleaner Prod. 275 (Dec): 123062. https://doi.org/10.1016/j.jclepro.2020.123062.
Mohammadhosseini, H., F. Alrshoudi, M. M. Tahir, R. Alyousef, H. Alghamdi, Y. R. Alharbi, and A. Alsaif. 2020. “Durability and thermal properties of prepacked aggregate concrete reinforced with waste polypropylene fibers.” J. Build. Eng. 32 (Nov): 101723. https://doi.org/10.1016/j.jobe.2020.101723.
Mohammed, A. A., and A. A. F. Rahim. 2020. “Experimental behavior and analysis of high strength concrete beams reinforced with PET waste fiber.” Constr. Build. Mater. 244 (May): 118350. https://doi.org/10.1016/j.conbuildmat.2020.118350.
Mohammed, H. J., and O. K. Aayeel. 2020. “Flexural behavior of reinforced concrete beams containing recycled expandable polystyrene particles.” J. Build. Eng. 32 (Nov): 101805. https://doi.org/10.1016/j.jobe.2020.101805.
Nematzadeh, M., A. A. Shahmansouri, and M. Fakoor. 2020. “Post-fire compressive strength of recycled PET aggregate concrete reinforced with steel fibers: Optimisation and prediction via RSM and GEP.” Constr. Build. Mater. 252 (Aug): 119057. https://doi.org/10.1016/j.conbuildmat.2020.119057.
Oliveira, P. R., M. May, S. Kilchert, L. A. de Oliveira, T. H. Panzera, V. Placet, F. Scarpa, and S. Hiermaier. 2021. “Eco-friendly panels made of autoclaved flax composites and upcycled bottle caps core: Experimental and numerical analysis.” Composites, Part C: Open Access 4 (Nov): 100114. https://doi.org/10.1016/j.jcomc.2021.100114.
Ongpeng, J. M. C., J. Barra, K. Carampatana, C. Sebastian, J. J. Yu, K. B. Aviso, and R. R. Tan. 2021. “Strengthening rectangular columns using recycled PET bottle strips.” Eng. Sci. Technol. Int. J. 24 (2): 405–413. https://doi.org/10.1016/j.jestch.2020.07.006.
Pešic, N., S. Zivanovic, R. Garcia, and P. Papastergiou. 2016. “Mechanical properties of concrete reinforced with recycled HDPE plastic fibres.” Constr. Build. Mater. 115 (Jul): 362–370. https://doi.org/10.1016/j.conbuildmat.2016.04.050.
Qazi, M. I., M. Abas, R. Khan, W. Saleem, C. I. Pruncu, and M. Omair. 2021. “Experimental investigation and multi-response optimisation of machinability of AA5005H34 using composite desirability coupled with PCA.” Metals 11 (2): 235. https://doi.org/10.3390/met11020235.
Rahim, N. L., S. Salehuddin, N. M. Ibrahim, R. C. Amat, and M. F. A. Jalil. 2013. “Use of plastic waste (high density polyethylene) in concrete mixture as aggregate replacement.” Adv. Mater. Res. 701: 265–269. https://doi.org/10.4028/www.scientific.net/AMR.701.265.
Saikia, N., and J. Brito. 2014. “Mechanical properties and abrasion behaviour of concrete containing shredded PET bottle waste as a partial substitution of natural aggregate.” Constr. Build. Mater. 52 (Feb): 236–244. https://doi.org/10.1016/j.conbuildmat.2013.11.049.
Senhadji, Y., H. Siad, G. Escadeillas, A. S. Benosman, R. Chihaoui, M. Mouli, and M. Lachemi. 2019. “Physical, mechanical and thermal properties of lightweight composite mortars containing recycled polyvinyl chloride.” Constr. Build. Mater. 195 (Jan): 198–207. https://doi.org/10.1016/j.conbuildmat.2018.11.070.
Shahjalal, M., K. Islam, J. Rahman, K. S. Ahmed, M. R. Karim, and A. H. M. M. Billah. 2021. “Flexural response of fiber reinforced concrete beams with waste tires rubber and recycled aggregate.” J. Cleaner Prod. 278 (Jan): 123842. https://doi.org/10.1016/j.jclepro.2020.123842.
Soutsos, M., and P. Domone. 2018. Construction materials: Their nature and behaviour. Boca Raton, FL: CRC Press. https://doi.org/10.4324/9780203478981.
Sun, Y., K. Q. Wang, and H. S. Lee. 2021. “Prediction of compressive strength development for blended cement mortar considering fly ash fineness and replacement ratio.” Constr. Build. Mater. 271 (Feb): 121532. https://doi.org/10.1016/j.conbuildmat.2020.121532.
Tafheem, Z., R. I. Rakib, M. D. Esharuhullah, S. M. R. Alam, and M. M. Islam. 2018. “Experimental investigation on the properties of concrete containing post-consumer plastic waste as coarse aggregate replacement.” J. Mater. Eng. Struct. 5 (1): 23–31.
Wang, F.-C., and H.-Y. Zhao. 2020. “Experimental investigation on blast furnace slag aggregate concrete filled double skin tubular (CFDST) stub columns under sustained loading.” Structures 27 (Oct): 352–360. https://doi.org/10.1016/j.istruc.2020.05.046.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Aug 12, 2021
Accepted: May 24, 2022
Published online: Dec 26, 2022
Published in print: Mar 1, 2023
Discussion open until: May 26, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.