Evaluation of Low-Temperature Performance of SBS/CR Composite Modified-Asphalt Mixture under Aging and Freeze–Thaw Cycles
Publication: Journal of Materials in Civil Engineering
Volume 34, Issue 10
Abstract
To study the effects of aging and freeze–thaw cycles on the low-temperature performance of styrene–butadiene–styrene (SBS)/crumb rubber (CR) composite modified asphalt mixtures. Digital image correlation (DIC) technology was combined with the three-point bending test to compare the strain field changes of SBS/crumb rubber composite modified asphalt mixture (SBS/CRMA) and SBS-modified asphalt mixture (SBSMA) during loading. A new index, linear strain density (), is proposed to evaluate the crack resistance of asphalt mixtures; is the cumulative value of linear strain from loading to failure. In addition, using the bending beam rheometer (BBR) test and asphalt–aggregate contact angle test, the cracking characteristics of two kinds of asphalt mixtures under different conditions were analyzed from two aspects: low-temperature rheological properties, and adhesion and bond failure. The results indicated that the new index () and the macroscopic index () for evaluating the cracking characteristics of asphalt mixtures have a good correlation with BBR and contact angle test results. After aging and freeze–thaw cycles, the crack resistance and adhesion of the two modified asphalts decreased, decreasing the crack resistance of SBS/CRMA and SBSMA. Under the same conditions, the cracking resistance, aging resistance, and freeze–thaw resistance of SBS/CRMA were better than those of SBSMA. SBS/CRMA could better meet the demands of pavement materials in cold regions.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This work was supported by a Grant (No. 2019GG031) from the Inner Mongolia Autonomous Region Foundation of China.
References
ASTM. 2013. Standard test method for measurement of the surface tension of solid coatings, substrates and pigments using contact angle measurements. ASTM D7490-13. West Conshohocken, PA: ASTM.
ASTM. 2016. Test method for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR). ASTM D6648-16. West Conshohocken, PA: ASTM.
Birgisson, B., A. Montepara, E. Romeo, R. Roncella, J. A. L. Napier, and G. Tebaldi. 2007. “Determination and prediction of crack patterns in hot mix asphalt (HMA) mixtures.” Eng. Fract. Mech. 75 (3–4): 664–673. https://doi.org/10.1016/j.engfracmech.2007.02.003.
Birgisson, B., A. Montepara, E. Romeo, R. Roque, and G. Tebaldi. 2010. “Influence of mixture properties on fracture mechanisms in asphalt mixtures.” Supplement, Road Mater. Pavement Des. 11 (S1): 61–88. https://doi.org/10.1080/14680629.2010.9690327.
Chinese Standard. 2004. Technical specifications for construction of highway asphalt pavements. JTG F40-2004. Beijing: Chinese Standard.
Cuciniello, G., P. Leandri, S. Filippi, D. Lo Presti, M. Losa, and G. Airey. 2018. “Effect of aging on the morphology and creep and recovery of polymer-modified bitumens.” Mater. Struct. 51 (5): 1–2. https://doi.org/10.1617/s11527-018-1263-3.
Dong, F. Q., X. Yu, S. J. Liu, and J. M. Wei. 2016. “Rheological behaviors and microstructure of SBS/CR composite modified hard asphalt.” Constr. Build. Mater. 115 (Jul): 285–293. https://doi.org/10.1016/j.conbuildmat.2016.04.057.
Feng, D. C., J. Y. Yi, D. S. Wang, and L. L. Chen. 2010. “Impact of salt and freeze–thaw cycles on performance of asphalt mixtures in coastal frozen region of China.” Cold Reg. Sci. Technol. 62 (1): 34–41. https://doi.org/10.1016/j.coldregions.2010.02.002.
Hernández Noguera, J. A., H. A. Rondón Quintana, and W. D. Fernández Gómez. 2014. “The influence of water on the oxidation of asphalt cements.” Constr. Build. Mater. 71 (Nov): 451–455. https://doi.org/10.1016/j.conbuildmat.2014.08.064.
Hill, B., and W. G. Buttlar. 2016. “Evaluation of polymer modification in asphalt mixtures through digital image correlation and performance space diagrams.” Constr. Build. Mater. 122 (Sep): 667–673. https://doi.org/10.1016/j.conbuildmat.2016.06.108.
Hill, B., and W. G. Buttlar. 2017. “Evaluation of the temperature properties of asphalt mixtures using a digital image correlation approach.” J. Test. Eval. 45 (6): 1904–1919. https://doi.org/10.1520/JTE20160621.
Li, H. B., W. B. Li, Y. P. Sheng, and H. L. Lv. 2021. “Influence of compound action of rubber powder and SBS on high-temperature performance of asphalt pavement surface.” J. Mater. Civ. Eng. 33 (6): 04021126. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003718.
Liu, H. Y., P. W. Hao, H. N. Wang, and S. J. Adhikair. 2014. “Effects of physio-chemical factors on asphalt aging behavior.” J. Mater. Civ. Eng. 26 (1): 190–197. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000786.
Liu, J., S. Zhao, L. Li, P. Li, and S. Saboundjian. 2017. “Low temperature cracking -analysis of asphalt binders and mixtures.” Cold Reg. Sci. Technol. 141 (9): 78–85. https://doi.org/10.1016/j.coldregions.2017.06.001.
Masri, Z. B., A. Alarab, G. Chehab, and A. Tehrani-Bagha. 2019. “Assessing moisture damage of asphalt-aggregate systems using principles of thermodynamics: Effects of recycled materials and binder aging.” J. Mater. Civ. Eng. 31 (9): 04019190. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002846.
Mishra, V., and D. Singh. 2019. “Impact of short-term aging temperatures of asphalt binder and aggregate roughness levels on bond strength.” Constr. Build. Mater. 218 (Sep): 295–307. https://doi.org/10.1016/j.conbuildmat.2019.05.125.
Pang, L., X. Zhang, S. Wu, Y. Ye, and Y. Li. 2018. “Influence of water solute exposure on the chemical evolution and rheological properties of asphalt.” Materials (Basel) 11 (6): 983. https://doi.org/10.3390/ma11060983.
Qian, C., W. Fan, G. Yang, L. Han, B. Xing, and X. Lv. 2020. “Influence of crumb rubber particle size and SBS structure on properties of CR/SBS composite modified asphalt.” Constr. Build. Mater. 235 (Feb): 117517. https://doi.org/10.1016/j.conbuildmat.2019.117517.
Rossi, C. O., A. Spadafora, B. Teltayev, G. Izmailova, Y. Amerbayev, and V. Bortolotti. 2015. “Polymer modified bitumen: Rheological properties and structural characterization.” Colloids Surf., A 480 (Sep): 390–397. https://doi.org/10.1016/j.colsurfa.2015.02.048.
Tan, Y., M. Guo, L. Cao, and L. Zhang. 2013. “Performance optimization of composite modified asphalt sealant based on rheological behavior.” Constr. Build. Mater. 47 (Oct): 799–805. https://doi.org/10.1016/j.conbuildmat.2013.05.015.
Wang, C., L. Zhao, W. Cao, D. Cao, and B. Tian. 2017. “Development of paving performance index system for selection of modified asphalt binder.” Constr. Build. Mater. 153 (Oct): 695–703. https://doi.org/10.1016/j.conbuildmat.2017.07.151.
Wang, L., M. Shan, C. Chang, and X. Zhou. 2020a. “The macro-and meso-cracking characteristics of warm mix crumb rubber asphalt mastics before and after aging.” Constr. Build. Mater. 262 (Nov): 120724. https://doi.org/10.1016/j.conbuildmat.2020.120724.
Wang, L., M. Shan, and C. Li. 2020b. “The cracking characteristics of the polymer-modified asphalt mixture before and after aging based on the digital image correlation technology.” Constr. Build. Mater. 260 (Nov): 119802. https://doi.org/10.1016/j.conbuildmat.2020.119802.
Wang, L., Y. M. Xing, and C. Q. Chang. 2012. “Experamental study on temperature characteristic of compound crumb rubber modified asphalt and mixture.” Adv. Mater. Res. 446–449 (10): 3647. https://doi.org/10.4028/www.scientific.net/AMR.446-449.3647.
Wang, S. F., D. X. Cheng, and F. P. Xiao. 2016. “Recent developments in the application of chemical approaches to rubberized asphalt.” Constr. Build. Mater. 131 (Jan): 101–113. https://doi.org/10.1016/j.conbuildmat.2016.11.077.
Wang, S. Y., C. Y. Guo, and F. Peng. 2010. “Research on modified mechanism of asphalt with crumb tire rubber.” J. Chang’an Univ. (Nat. Sci. Ed.) 30 (4): 34–38. https://doi.org/10.19721/j.cnki.1671-8879.2010.04.007.
Xiang, L., J. Cheng, and S. Kang. 2015. “Thermal oxidative aging mechanism of crumb rubber/SBS composite modified asphalt.” Constr. Build. Mater. 75 (Jan): 169–175. https://doi.org/10.1016/j.conbuildmat.2014.08.035.
Xiong, R., C. Chu, N. Qiao, L. Wang, F. Wang, Y. Sheng, B. Guan, D. Niu, J. Geng, and H. Chen. 2019a. “Performance evaluation of asphalt mixture exposed to dynamic water and chlorine salt erosion.” Constr. Build. Mater. 201 (Mar): 121–126. https://doi.org/10.1016/j.conbuildmat.2018.12.190.
Xiong, R., N. Qiao, F. Yang, C. Chu, L. Li, J. Wu, W. Jiang, K. Li, and H. Chen. 2019b. “Performance damage characteristics of asphalt binder suffered from the action of sulfate.” Adv. Mater. Sci. Eng. 2019 (4): 5465687. https://doi.org/10.1155/2019/5465687.
Yang, G., A. Q. Shen, Z. G. Chen, L. M. Yu, and Y. C. Guo. 2015. “Pavement performance and modified mechanism of rubber powder and SBS compound modified asphalt mixture in seasonal freezing region.” J. Chang’an Univ. (Nat. Sci. Ed.) 35 (6): 6–15. https://doi.org/10.19721/j.cnki.1671-8879.2015.06.002.
Ye, Y., G. Xu, L. Lou, X. Chen, D. Cai, and Y. Shi. 2019. “Evolution of rheological behaviors of styrene-butadiene-styrene/crumb rubber composite modified bitumen after different long-term aging processes.” Materials (Basel) 12 (15): 2345. https://doi.org/10.3390/ma12152345.
Young, T. 1805. “An essay on the cohesion of fluids.” Philos. Trans. R. Soc. 95 (1): 65–87. https://doi.org/10.1007/s10853-005-1889-8.
Zhang, F., and C. Hu. 2015. “The research for structural characteristics and modification mechanism of crumb rubber compound modified asphalts.” Constr. Build. Mater. 76 (Feb): 330–342. https://doi.org/10.1016/j.conbuildmat.2014.12.013.
Zhang, H., G. Xu, X. Chen, R. Wang, and K. Shen. 2019. “Effect of long-term laboratory aging on rheological properties and cracking resistance of polymer-modified asphalt binders at intermediate and low temperature range.” Constr. Build. Mater. 226 (Nov): 767–777. https://doi.org/10.1016/j.conbuildmat.2019.07.206.
Zhang, H., C. Zhu, B. Tan, and C. Shi. 2014. “Effect of organic layered silicate on microstructures and aging properties of styrene–butadiene–styrene copolymer modified bitumen.” Constr. Build. Mater. 68 (Oct): 31–38. https://doi.org/10.1016/j.conbuildmat.2014.06.038.
Zhang, K., Y. F. Luo, W. Xie, and J. J. Wu. 2020. “Evaluation of road performance and adhesive characteristic of asphalt binder in salt erosion environment.” Mater. Today Commun. 25 (Dec): 101593. https://doi.org/10.1016/j.mtcomm.2020.101593.
Zhao, W. H., X. B. Xie, G. H. Li, J. G. Geng, M. Bao, and M. W. Wang. 2020. “Research on the influence of nanocarbon/copolymer SBS/rubber powder composite modification on the properties of asphalt and mixtures.” Adv. Mater. Sci. Eng. 2020 (Dec): 8820202. https://doi.org/10.1155/2020/8820202.
Zhou, J., X. Chen, G. Xu, and Q. Fu. 2019. “Evaluation of low temperature performance for SBS/CR compound modified asphalt binders based on fractional viscoelastic model.” Constr. Build. Mater. 214 (Jul): 326–336. https://doi.org/10.1016/j.conbuildmat.2019.04.064.
Zhu, C., J. Tang, H. Zhang, and H. Duan. 2019. “Effect of liquid anti-stripping agents on moisture sensitivity of crumb rubber modified asphalt binders and mixtures.” Constr. Build. Mater. 225 (Nov): 112–119. https://doi.org/10.1016/j.conbuildmat.2019.07.173.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Oct 29, 2021
Accepted: Jan 26, 2022
Published online: Jul 18, 2022
Published in print: Oct 1, 2022
Discussion open until: Dec 18, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Lan Wang, Wei Wang, Hanfeng Guan, Yaxin Li, Ke Pei, Baiyinshuang Chen, Effect of Salt Freeze–Thaw Cycle on Crack Resistance of Steel Slag Rubber Powder Modified Asphalt Mixture, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-16563, 36, 3, (2024).
- Yuanyuan Li, Jun Li, Tao Bai, Anqi Chen, Dengjun Gu, Yangming Gao, Mechanism and Performance of SBS Polymer Dry-Modified Asphalt Mixture with PCB and TPO from Waste Tires, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-16018, 36, 6, (2024).