Relation between the Metallographic Structure and Mechanical Properties of a Bimetallic Steel Bar after Fire
Publication: Journal of Materials in Civil Engineering
Volume 34, Issue 8
Abstract
Bimetallic steel bar (BSB) consisting of S30408 stainless steel (cladding layer) and HRB400 carbon steel bar (substrate) has outstanding durability, indicating its suitability for RC structures in corrosive environments. The effects of fire on the mechanical properties of BSB in relation to its metallographic structure (MS) were investigated experimentally by exposing BSB specimens to different elevated temperatures and cooling methods. When the exposure temperature (ET) was lower than the austenite transformation temperature, the changes in the MS were relatively small. When the ET was higher than 700°C, lamellar pearlite and lath martensite were formed in the substrate of BSB specimens with cooling in air (CIA) and cooling in water (CIW), respectively, which led to changes in the mechanical properties. The hardness of the BSB specimens also was affected by the ET and cooling method. There always was a yield plateau in the stress–strain curve of the BSB specimens with CIA. When the ET ranged from 700°C to 900°C, the formation of granular pearlite improved the homogeneity of cementite in ferrite, which enhanced the ductility. For BSB specimens with CIW, when the ETs were 800°C and 900°C, the yield plateau in the stress–strain curve disappeared because of the lath martensite in the substrate. Ductile dimples were observed in the scanning electron microscope images of the BSB specimens with CIA. However, for BSB specimens exposed to 900°C with CIW, the ductile dimples were almost negligible.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
We acknowledge the support provided by the National Natural Science Foundation of China (Grant Nos. 51778087 and 51808071) and the Special Funding for the Research Projects of Postdoctoral Researchers in Chongqing (XmT20200011).
References
Al-Ameeri, A. S., M. I. Rafiq, O. Tsioulou, and O. Rybdylova. 2021. “Impact of climate change on the carbonation in concrete due to carbon dioxide ingress: Experimental investigation and modelling.” J. Build. Eng. 44 (Dec): 102594. https://doi.org/10.1016/j.jobe.2021.102594.
Apostolopoulos, C. A. 2007. “Mechanical behavior of corroded reinforcing steel bars S500s tempcore under low cycle fatigue.” Constr. Build. Mater. 21 (7): 1447–1456. https://doi.org/10.1016/j.conbuildmat.2006.07.008.
Ban, H., R. Bai, K. Chung, and Y. Bai. 2020. “Post-fire material properties of stainless-clad bimetallic steel.” Fire Saf. J. 112 (Mar): 102964. https://doi.org/10.1016/j.firesaf.2020.102964.
Cai, W.-Y., J. Jiang, Y.-B. Wang, and G.-Q. Li. 2020. “Fracture behavior of high-strength steels at elevated temperatures.” J. Constr. Steel Res. 175 (Dec): 106385. https://doi.org/10.1016/j.jcsr.2020.106385.
Chiew, S. P., M. S. Zhao, and C. K. Lee. 2014. “Mechanical properties of heat-treated high strength steel under fire/post-fire conditions.” J. Constr. Steel Res. 98 (Jul): 12–19. https://doi.org/10.1016/j.jcsr.2014.02.003.
Gao, X., X. Zhang, H. Liu, Z. Chen, and H. Li. 2018. “Residual mechanical properties of stainless steels S30408 and S31608 after fire exposure.” Constr. Build. Mater. 165 (Mar): 82–92. https://doi.org/10.1016/j.conbuildmat.2018.01.020.
Glassman, J. D., A. Gomez, M. E. M. Garlock, and J. Ricles. 2020. “Mechanical properties of weathering steels at elevated temperatures.” J. Constr. Steel Res. 168 (May): 105996. https://doi.org/10.1016/j.jcsr.2020.105996.
Heidarpour, A., N. S. Tofts, A. H. Korayem, X. L. Zhao, and C. R. Hutchinson. 2014. “Mechanical properties of very high strength steel at elevated temperatures.” Fire Saf. J. 64 (Feb): 27–35. https://doi.org/10.1016/j.firesaf.2014.01.006.
Hua, J., H. Fan, W. Yan, N. Wang, X. Xue, and L. Huang. 2022a. “Seismic resistance of the corroded bimetallic steel bar under different strain amplitudes.” Constr. Build. Mater. 319 (Feb): 126088. https://doi.org/10.1016/j.conbuildmat.2021.126088.
Hua, J., F. Wang, L. Huang, N. Wang, and X. Xue. 2021a. “Experimental study on mechanical properties of corroded stainless-clad bimetallic steel bars.” Constr. Build. Mater. 287 (Jun): 123019. https://doi.org/10.1016/j.conbuildmat.2021.123019.
Hua, J., F. Wang, N. Wang, L. Huang, L. Hai, Y. Li, X. Zhu, and X. Xue. 2021b. “Experimental and numerical investigations on corroded stainless-clad bimetallic steel bar with artificial damage.” J. Build. Eng. 44 (May): 102779. https://doi.org/10.1016/j.jobe.2021.102779.
Hua, J., F. Wang, Y. Xiang, Z. Yang, X. Xue, L. Huang, and N. Wang. 2022b. “Mechanical properties of stainless-clad bimetallic steel bars exposed to elevated temperatures.” Fire Saf. J. 127 (Jan): 103521. https://doi.org/10.1016/j.firesaf.2021.103521.
Hua, J., Z. Yang, X. Xue, L. Huang, N. Wang, and Z. Chen. 2022c. “Bond properties of bimetallic steel bar in seawater sea-sand concrete at different ages.” Constr. Build. Mater. 323 (Mar): 126539. https://doi.org/10.1016/j.conbuildmat.2022.126539.
Kashani, M. M., A. K. Barmi, and V. S. Malinova. 2015. “Influence of inelastic buckling on low-cycle fatigue degradation of reinforcing bars.” Constr. Build. Mater. 94 (Sep): 644–655. https://doi.org/10.1016/j.conbuildmat.2015.07.102.
Li, G. Q., H. Lyu, and C. Zhang. 2017. “Post-fire mechanical properties of high strength Q690 structural steel.” J. Constr. Steel Res. 132 (May): 108–116. https://doi.org/10.1016/j.jcsr.2016.12.027.
Li, G.-Q., X.-X. Wang, C. Zhang, and W. Y. Cai. 2020. “Creep behavior and model of high-strength steels over 500 MPa at elevated temperatures.” J. Constr. Steel Res. 168 (May): 105989. https://doi.org/10.1016/j.jcsr.2020.105989.
Li, H.-T., and B. Young. 2017. “Material properties of cold-formed high strength steel at elevated temperatures.” Thin-Walled Struct. 115 (Jun): 289–299. https://doi.org/10.1016/j.tws.2017.02.019.
Li, X., K. H. Lo, C. T. Kwok, Y. F. Sun, and K. K. Lai. 2018. “Post-fire mechanical and corrosion properties of duplex stainless steel: Comparison with ordinary reinforcing-bar steel.” Constr. Build. Mater. 174 (Jun): 150–158. https://doi.org/10.1016/j.conbuildmat.2018.04.110.
Lu, J., H. Liu, Z. Chen, and X. Liao. 2016. “Experimental investigation into the post-fire mechanical properties of hot-rolled and cold-formed steels.” J. Constr. Steel Res. 121 (Jun): 291–310. https://doi.org/10.1016/j.jcsr.2016.03.005.
Qiang, X., F. S. K. Bijlaard, and H. Kolstein. 2012. “Post-fire mechanical properties of high strength structural steels S460 and S690.” Eng. Struct. 35 (Feb): 1–10. https://doi.org/10.1016/j.engstruct.2011.11.005.
Raj, H., A. Saraf, S. Sangal, and S. Misra. 2016. “Residual properties of TMT steel bars after exposure to elevated temperatures.” J. Mater. Civ. Eng. 28 (2): 04015098. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001350.
Ren, C., H. Wang, Y. Huang, and Q.-Q. Yu. 2020. “Post-fire mechanical properties of corroded grade D36 marine steel.” Constr. Build. Mater. 263 (Dec): 120120. https://doi.org/10.1016/j.conbuildmat.2020.120120.
Saremi, M., and E. Mahallati. 2002. “A study on chloride-induced depassivation of mild steel in simulated concrete pore solution.” Cem. Concr. Res. 32 (12): 1915–1921. https://doi.org/10.1016/s0008-8846(02)00895-5.
Song, L.-X., and G.-Q. Li. 2021. “Processing and cooling effects on post-fire mechanical properties of high strength structural steels.” Fire Saf. J. 122 (Jun): 103346. https://doi.org/10.1016/j.firesaf.2021.103346.
Standardization Administration of China. 2009. Metallic materials—Vickers hardness test—Part 1: Test method. [In Chinese.] GB/T 4340.1-2009. Beijing, China: China Standard Press.
Standardization Administration of China. 2010. Metallic materials—Tensile testing—Part 1: Method of test at room temperature. [In Chinese.] GB/T 228-2010. Beijing, China: China Standard Press.
Standardization Administration of China. 2015. Inspection methods of microstructure for metals. [In Chinese.] GB/T 13298-2015. Beijing, China: China Standard Press.
Sun, F. F., X. Y. Xue, Y. Xiao, Y. M. Le, and G. Q. Li. 2018. “Effect of welding and complex loads on the high-strength steel T-stub connection.” J. Constr. Steel Res. 150 (Jun): 76–86. https://doi.org/10.1016/j.jcsr.2018.08.002.
Tao, Z., X.-Q. Wang, and B. Uy. 2013. “Stress-strain curves of structural and reinforcing steels after exposure to elevated temperatures.” J. Mater. Civ. Eng. 25 (9): 1306–1316. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000676.
Tariq, F., and P. Bhargava. 2018. “Residual mechanical behavior of (SD 500) hot rolled TMT reinforcing steel bars after elevated temperatures.” Constr. Build. Mater. 190 (Nov): 551–559. https://doi.org/10.1016/j.conbuildmat.2018.09.008.
Wang, W., T. Liu, and J. Liu. 2015. “Experimental study on post-fire mechanical properties of high strength Q460 steel.” J. Constr. Steel Res. 114 (Nov): 100–109. https://doi.org/10.1016/j.jcsr.2015.07.019.
Wang, W., Y. Zhang, L. Xu, and X. Li. 2020. “Mechanical properties of high-strength Q960 steel at elevated temperature.” Fire Saf. J. 114 (Jun): 103010. https://doi.org/10.1016/j.firesaf.2020.103010.
Xiao, Y., X. Y. Xue, F. F. Sun, and G. Q. Li. 2018. “Postbuckling shear capacity of high-strength steel plate girders.” J. Constr. Steel Res. 150 (Nov): 475–490. https://doi.org/10.1016/j.jcsr.2018.08.032.
Xiao, Y., X. Y. Xue, F. F. Sun, and G. Q. Li. 2019. “Intermediate transverse stiffener requirements of high-strength steel plate girders considering postbuckling capacity.” Eng. Struct. 196 (Oct): 109289. https://doi.org/10.1016/j.engstruct.2019.109289.
Xiong, M. X., and J. Y. R. Liew. 2016. “Mechanical properties of heat-treated high tensile structural steel at elevated temperatures.” Thin-Walled Struct. 98 (Part A): 169–176. https://doi.org/10.1016/j.tws.2015.04.010.
Xue, X. Y., X. Zhou, Y. Shi, and Y. Xiang. 2021. “Ultimate shear resistance of S600E high-strength stainless steel plate girders.” J. Constr. Steel Res. 179 (Apr): 106535. https://doi.org/10.1016/j.jcsr.2021.106535.
Zhou, X., X. Xue, Y. Shi, and J. Xu. 2021. “Post-fire mechanical properties of Q620 high-strength steel with different cooling methods.” J. Constr. Steel Res. 180 (May): 106608. https://doi.org/10.1016/j.jcsr.2021.106608.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Aug 4, 2021
Accepted: Dec 27, 2021
Published online: May 28, 2022
Published in print: Aug 1, 2022
Discussion open until: Oct 28, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Jianmin Hua, Fei Wang, Xuanyi Xue, Yingzhi Sun, Yuxin Gao, Post-fire ultra-low cycle fatigue properties of high-strength steel via different cooling methods, Thin-Walled Structures, 10.1016/j.tws.2022.110406, 183, (110406), (2023).
- Zeqiao Luo, Yu Shi, Xuanyi Xue, Xuhong Zhou, Xinmei Yao, Nonlinear patch resistance performance of hybrid titanium-clad bimetallic steel plate girder with web opening, Journal of Building Engineering, 10.1016/j.jobe.2022.105703, 65, (105703), (2023).
- Zeqiao Luo, Yu Shi, Xuanyi Xue, Lei Xu, Haibin Zhang, Design recommendations on longitudinally stiffened titanium-clad bimetallic steel plate girder, Journal of Constructional Steel Research, 10.1016/j.jcsr.2022.107748, 201, (107748), (2023).
- Yu Shi, Jie Wang, Xuhong Zhou, Xuanyi Xue, Post–fire properties of stainless–clad bimetallic steel produced by explosive welding process, Journal of Constructional Steel Research, 10.1016/j.jcsr.2022.107690, 201, (107690), (2023).
- Xuanyi Xue, Yu Shi, Xuhong Zhou, Jie Wang, Yunpeng Xu, Experimental study on the properties of Q960 ultra–high–strength steel after fire exposure, Structures, 10.1016/j.istruc.2022.12.034, 47, (2081-2098), (2023).
- Zeqiao Luo, Yu Shi, Xuanyi Xue, Tingting Gao, Experimental and numerical investigation on patch loading capacity of longitudinally stiffened hybrid titanium-clad bimetallic steel plate girder, Engineering Failure Analysis, 10.1016/j.engfailanal.2023.107117, 146, (107117), (2023).
- Xuanyi Xue, Fei Wang, Jianmin Hua, Neng Wang, Lepeng Huang, Zengshun Chen, Yunhang Yao, Effects of Polyoxymethylene Fiber on Fresh and Hardened Properties of Seawater Sea-Sand Concrete, Polymers, 10.3390/polym14224969, 14, 22, (4969), (2022).
- Lei Yan, Wenjie Deng, Neng Wang, Xuanyi Xue, Jianmin Hua, Zengshun Chen, Anti-Corrosion Reinforcements Using Coating Technologies—A Review, Polymers, 10.3390/polym14214782, 14, 21, (4782), (2022).
- Xuanyi Xue, Neng Wang, Lepeng Huang, Jianmin Hua, Fei Wang, Zengshun Chen, Ji Liao, Letian Hai, Design Suggestions on Resistance from Flange of Sorbite Stainless Steel Plate Girder under Shear, Materials, 10.3390/ma15228069, 15, 22, (8069), (2022).
- Xuanyi Xue, Jianmin Hua, Fei Wang, Neng Wang, Shuang Li, Mechanical Property Model of Q620 High-Strength Steel with Corrosion Effects, Buildings, 10.3390/buildings12101651, 12, 10, (1651), (2022).
- See more