Influence of the Content of Alkalis ( and ), MgO, and Present in the Granite Rock Fine in the Production of Portland Clinker
Publication: Journal of Materials in Civil Engineering
Volume 34, Issue 3
Abstract
This work analyzed the technical viability of the use of granite rock fines (GRF) for the manufacture of portland cement. The simultaneous influence of the contents of MgO, , and alkalis ( and ) present in the GRF in the formation of the mineralogical phases of the portland clinker was evaluated. Laboratory clinkers with replacement of clay by GRF at contents of 50% and 100% were characterized by X-ray diffraction and used to produce portland cement. Then, the physical–mechanical properties of this cement were evaluated. The addition of GRF replacing 25% and 50% clay increased the content of alite () in the clinkers and stabilized the and orthorhombic polymorphs due to the presence of MgO and in their composition. Cements made with replacement contents of 50% and 100% of clay by GRF showed higher compressive strength than reference cement.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and codes generated or used in the study appear in the published paper.
Acknowledgments
The authors would like to thank Carina Soares, a technician from the Federal Institute of Bahia (IFBA), for the postdoctoral fellow of the Graduate Program in Chemical Engineering (PPEQ) of the Federal University of Bahia (UFBA) Sirlene Lima, to the Fundação de Amparo a Pesquisa from the State of Bahia (FAPESB) for the scientific initiation scholarship granted to the undergraduate student André Gomes, to the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) for the doctoral scholarship granted to the student Tiago Assunção during the research period.
References
ABNT (Associação Brasileira de Normas Técnicas). 2016. Cimento portland: Determinação da expansibilidade Le Chatelier. NBR 11582. Rio de Janeiro, Brazil: ABNT.
ABNT (Associação Brasileira de Normas Técnicas). 2018. Cimento portland: Requisitos. NBR 16697. Rio de Janeiro, Brazil: ABNT.
Andrade Neto, J. S., B. B. Mariani, N. S. Amorim Junior, and D. V. Ribeiro. 2019. “Characterization of cements produced from clinker co-processed with waste (UOW).” Key Eng. Mater. 803: 278–283. https://doi.org/10.4028/www.scientific.net/KEM.803.278.
ANEPAC (Associação Nacional das Entidades de Produtores de Agregados para Construção). 2019. “Associação brasileira de normas técnicas NBR 16.697: Cimento portland—Requisitos.” Accessed March 23, 2020. https://www.anepac.org.br/agregados/areia-e-brita.
Aruntaş, H. Y., M. Gürü, M. Day, and I. Tekin. 2010. “Utilization of waste marble dust as an additive in cement production.” Mater. Des. 31 (8): 4039–4042. https://doi.org/10.1016/j.matdes.2010.03.036.
ASTM. 1997. Standard specification for Portland cement. ASTM C150-97. West Conshohocken, PA: ASTM.
Boughanmi, S., I. Labidi, A. Megriche, M. El Maaoui, and A. Nonat. 2018. “Natural fluorapatite as a raw material for portland clinker.” Cem. Concr. Res. 105 (Mar): 72–80. https://doi.org/10.1016/j.cemconres.2018.01.006.
Brandštetr, J., J. Havlica, and I. Odler. 1997. “Properties and use of solid residue from fluid-ized bed coal combustion.” In Waste materials used in concrete manufacturing. Westwood, NJ: Noyes Publications.
Buruberri, L. H., M. P. Seabra, and J. A. Labrincha. 2015. “Preparation of clinker from paper pulp industry wastes.” J. Hazard. Mater. 286 (Apr): 252–260. https://doi.org/10.1016/j.jhazmat.2014.12.053.
Cao, L., W. Shen, J. Huang, Y. Yang, D. Zhang, X. Huang, Z. Lv, and X. Ji. 2019. “Process to utilize crushed steel slag in cement industry directly: Multi-phased clinker sintering technology.” J. Cleaner Prod. 217 (Apr): 520–529. https://doi.org/10.1016/j.jclepro.2019.01.260.
CEN (European Committee for Standardization). 2016. Methods of testing cement. Determination of setting times and soundness. BS EN 196-3. Brussels, Belgium: CEN.
Chen, I. A., and M. C. G. Juenger. 2009. “Incorporation of waste materials into portland cement clinker synthesized from reagent-grade chemicals.” Int. J. Appl. Ceramic Technol. 6 (1): 2617–2627.
Choudhury, I., and S. Hashm. 2020. Encyclopedia of renewable and sustainable materials. 1st ed. Amsterdam, Netherlands: Elsevier.
Costa, F. N., and D. V. Ribeiro. 2021. “Reduction in emissions during production of cement, with partial replacement of traditional raw materials by civil construction waste (CCW).” J. Cleaner Prod. 276 (Dec): 123302. https://doi.org/10.1016/j.jclepro.2020.123302.
De La Torre, A. G., K. Morsli, M. Zahir, and M. A. G. Aranda. 2007. “In situ synchrotron powder diffraction study of active belite clinker.” J. Appl. Crystallogr. 40 (6): 999–1007. https://doi.org/10.1107/S0021889807042379.
Dubina, E., J. Plank, and L. Black. 2015. “Impact of water vapour and carbon dioxide on surface composition of C3A polymorphs studied by X-ray photoelectron spectroscopy.” Cem. Concr. Res. 73 (Jul): 36–41. https://doi.org/10.1016/j.cemconres.2015.02.026.
Felekoglu, B., K. Tosun, B. Baradan, A. Altun, and B. Uyulgan. 2006. “The effect of fly ash and limestone fillers on the viscosity and compressive strength of selfcompacting repair mortars.” Cem. Concr. Res. 36 (9): 1719–1726. https://doi.org/10.1016/j.cemconres.2006.04.002.
Gao, X., B. Yuan, Q. L. Yu, and H. J. H. Brouwers. 2017. “Characterization and application of municipal solid waste incineration (MSWI) bottom ash and waste granite powder in alkali activated slag.” J. Cleaner Prod. 164 (Oct): 410–419. https://doi.org/10.1016/j.jclepro.2017.06.218.
Gartner, E., and H. Hiroshi. 2015. “A review of alternative approaches to the reduction of CO2 emissions associated with the manufacture of the binder phase in concrete.” Cem. Concr. Res. 78 (Part A): 126–142. https://doi.org/10.1016/j.cemconres.2015.04.012.
Gobbo, L., L. Sant’agostino, and L. Garcez. 2004. “C3A polymorphs related to industrial clinker alkalies content.” Cem. Concr. Res. 34 (4): 657–664. https://doi.org/10.1016/j.cemconres.2003.10.020.
Gomes, A. G., T. A. Santos, J. S. Andrade Neto, and D. V. Ribeiro. 2019. “Mineralogical analysis of portland clinker produced from the incorporation of Granitic Rock Fines (GRF).” In Vol. 803 of Key engineering materials, 309–313. Freienbach, Switzerland: Trans Tech Publication.
Hanein, T., F. P. Glasser, and M. N. Bannerman. 2020. “Thermodynamic data for cement clinkering.” Cem. Concr. Res. 132 (Jun): 106043. https://doi.org/10.1016/j.cemconres.2020.106043.
Ji, T., C. Y. Chen, Y. Y. Chen, Y. Z. Zhuang, J. F. Chen, and X. Lin. 2013. “Effect of moisture state of recycled fine aggregate on the cracking resistibility of concrete.” Constr. Build. Mater. 44 (Jul): 726–733. https://doi.org/10.1016/j.conbuildmat.2013.03.059.
Kakali, G., and S. Tsivilis. 1993. “The effect of intergrinding and separate grinding of cement raw mix on the burning process.” Cem. Concr. Res. 23 (3): 651–662. https://doi.org/10.1016/0008-8846(93)90016-3.
Kolovos, K., S. Tsivilis, and G. Kakali. 2002. “The effect of foreign ions on the reactivity of the : Part II: Cations.” Cem. Concr. Res. 32 (3): 463–469. https://doi.org/10.1016/S0008-8846(01)00705-0.
Lin, K. L., K. W. Lo, M. J. Hung, T. W. Cheng, and Y. M. Chang. 2017. “Recycling of spent catalyst and waste sludge from industry to substitute raw materials in the preparation of portland cement clinker.” Sustainable Environ. Res. 27 (5): 251–257. https://doi.org/10.1016/j.serj.2017.05.001.
Ma, X., H. Chen, and P. Wang. 2020. “Effect of TiO2 on the formation of clinker with high C3S.” J. Wuhan Univ. Technol. Mater. Sci. 4 (1): 830–833. https://doi.org/10.1007/s11595-009-5830-x.
Maki, I., H. Haba, and S. Takahashi. 1983. “Effect of recrystallization on the characters of alite in portland cement clinker.” Cem. Concr. Res. 13 (5): 689–695. https://doi.org/10.1016/0008-8846(83)90059-5.
Mariani, B. B., J. S. Andrade Neto, N. S. Amorim Junior, and D. V. Ribeiro. 2019. “Efeito da incorporação de resíduo de (MNR) na formação das fases mineralógicas de clínquer portland.” Ambiente Construído 19 (1): 57–71. https://doi.org/10.1590/s1678-86212019000100293.
Mehta, P. K., and O. E. Gjorv. 1974. “A new test for sulfate resistance of cements.” J. Test. Eval. 2: 510–515. https://doi.org/10.1520/JTE11684J.
Mumme, W., R. Hill, G. Bushnell-Wye, and E. Segnit. 1995. “Rietveld crystal structure refinements, crystal chemistry and calculated powder diffraction data for the polymorphs of dicalcium silicate and related phases.” Neues Jb Mineral Abh 169: 35–68.
Nishi, F., Y. Takeuchi, and I. Maki. 1985. “Tricalcium silicate Ca3O [SiO4]: The monoclinic superstructure.” Zeitschrift Kristallographie-Crystallogr. Mater. 172 (1–4): 297–314. https://doi.org/10.1524/zkri.1985.172.14.297.
Ostrowski, C., and J. Żelazny. 2004. “Solid solutions of calcium aluminates , and CA with sodium oxide.” J. Therm. Anal. Calorim. 75 (3): 867–885. https://doi.org/10.1023/B:JTAN.0000027182.40442.fe.
Puertas, F., I. García-Díaz, M. Palacious, M. F. Gazulla, M. P. Gómez, and M. Orduña. 2010. “Clinkers and cements obtained from raw mix containing ceramic waste as a raw material. Characterization, hydration and leaching studies.” Cem. Concr. Compos. 32 (3): 175–186. https://doi.org/10.1016/j.cemconcomp.2009.11.011.
Sasaki, S., K. Fujino, and Y. Takéuchi. 1979. “X-ray determination of electron-density distributions in oxides, MgO, MnO, CoO, and NiO, and atomic scattering factors of their constituent atoms.” Proc. Jpn. Acad., Ser. B 55 (2): 43–48. https://doi.org/10.2183/pjab.55.43.
Schoon, J., K. De Buysser, I. Van Driessche, and N. De Belie. 2013. “Feasibility study on the use of cellular concrete as alternative raw material for portland clinker production.” Constr. Build. Mater. 48 (Nov): 725–733. https://doi.org/10.1016/j.conbuildmat.2013.07.083.
Segata, M., N. Marinoni, M. Galimberti, M. Marchi, M. Cantaluppi, A. Pavese, and A. G. De La Torre. 2019. “The effects of MgO, Na2O and SO3 on industrial clinkering process: Phase composition, polymorphism, microstructure and hydration, using a multidisciplinary approach.” Mater. Charact. 155 (Sep): 109809. https://doi.org/10.1016/j.matchar.2019.109809.
Siqueira, T. P. L., J. S. Andrade Neto, C. M. R. Dias, and D. V. Ribeiro. 2020. “Adição de finos de rocha granítica e seus efeitos nas propriedades de argamassas autoadensáveis.” Ambiente Construído 20 (3): 451–466. https://doi.org/10.1590/s1678-86212020000300439.
Song, T. H., S. H. Lee, and S. H. Kim. 2018. “Recycling of crushed stone powder as a partial re-placement for silica powder in extruded cement panels.” Constr. Build. Mater. 52 (Feb): 105–115. https://doi.org/10.1016/j.conbuildmat.2013.10.060.
Stanek, T., and P. Sulovsky. 2002. “The influence of the alite polymorphism on the strength of portland cement.” Cem. Concr. Res. 32 (7): 1169–1175. https://doi.org/10.1016/S0008-8846(02)00756-1.
Taylor, H. F. W. 1997. Cement chemistry. 2nd ed. London: Thomas Telford.
UN Environment, K. L. Scrivener, V. M. John, and E. M. Gartner. 2018. “Eco-efficient cements: Potential economically viable solutions for a low- cement-based materials industry.” Cem. Concr. Res. 114 (Dec): 2–26. https://doi.org/10.1016/j.cemconres.2018.03.015.
Uysal, M., and K. Yilmaz. 2011. “Effect of mineral admixtures on properties of selfcompacting concrete.” Cem. Concr. Compos. 33 (7): 771–776. https://doi.org/10.1016/j.cemconcomp.2011.04.005.
Vazzoler, J., L. Vieira, R. Teles, M. Degen, and R. Teixeira. 2018. “Investigation of the potential use of waste from ornamental stone processing after heat treatment for the production of cement-based paste.” Constr. Build. Mater. 177 (Jul): 314–321. https://doi.org/10.1016/j.conbuildmat.2018.05.098.
Winter, N. B. 2012. Understanding cement. 1st ed. London: WHD Microanalysis Consultants.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: May 16, 2021
Accepted: Sep 16, 2021
Published online: Dec 20, 2021
Published in print: Mar 1, 2022
Discussion open until: May 20, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Michal Marko, Petr Hrubý, Martin Janča, Jakub Kříkala, Jan Hajzler, František Šoukal, Jan Vojtíšek, Martin Doležal, Monitoring of Ion Mobility in the Cement Matrix to Establish Sensitivity to the ASR Caused by External Sources, Materials, 10.3390/ma15144730, 15, 14, (4730), (2022).
- Tiago A. Santos, Marcelo S. Cilla, e Daniel V. Ribeiro, Use of asbestos cement tile waste (ACW) as mineralizer in the production of Portland cement with low CO2 emission and lower energy consumption, Journal of Cleaner Production, 10.1016/j.jclepro.2021.130061, 335, (130061), (2022).
- M. Rosales, J. Rosales, F. Agrela, M.I. Sánchez de Rojas, M. Cabrera, Design of a new eco-hybrid cement for concrete pavement, made with processed mixed recycled aggregates and olive biomass bottom ash as supplementary cement materials, Construction and Building Materials, 10.1016/j.conbuildmat.2022.129417, 358, (129417), (2022).
- José S. Andrade Neto, Bruna B. Mariani, Nilson S. Amorim Júnior, Daniel V. Ribeiro, Effects of TiO2 waste on the formation of clinker phases and mechanical performance and hydration of Portand cement, CEMENT, 10.1016/j.cement.2022.100036, 9, (100036), (2022).