Performance and Microstructural Evaluation of Rice Husk Ash–Ground Granulated Blast Furnace Slag–CFBC Fly Ash Mixtures Produced as an Eco-Cement
Publication: Journal of Materials in Civil Engineering
Volume 34, Issue 3
Abstract
This study was designed to evaluate the performance and microstructure of eco-cements containing rice husk ash (RHA), ground granulated blast furnace slag (GGBFS), and circulating fluidized bed combustion (CFBC) fly ash (CFA). Eco-cement samples with a water to () mass ratio of 0.40 were prepared with four mass percentages of 0%, 15%, 30%, and 45% and three mass percentages of 10%, 20%, and 30%. The compressive strength performance and overall quality [tested using ultrasonic pulse velocity (UPV)] of the eco-cements were found to be significantly and differently affected by the percentages of RHA, GGBFS, and CFA used. Although CFA was found to reduce compressive strength and UPV at early ages of curing, CFA enhanced these values at later ages and promoted the development of the eco-cements due to the increased formation of hydration products [ettringite (AFt), C─ S─ H, and C─ A─ S─ H], as identified using energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and Fourier-transform infrared (FTIR) analyses. The incorporation of more RHA was found to reduce the compressive strength and UPV values of the eco-cements. The compressive strength values of the eco-cements at 28 and 91 days were in the ranges of 20.4–39.1 and , respectively, whereas the UPV values of all eco-cements at 28 and 91 days were in the ranges of 2,897–3,368 and , respectively. The RHA-free eco-cement activated by 20% CFA had the highest compressive strength and UPV values at all curing ages. The substitution of GGBFS with 15%–45% RHA can be used to produce eco-cements used in mortar/concrete with various requirements such as low to medium strength and low cost.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This research was funded by the Vietnam National Foundation for Science and Technology Development (NAFOSTED) under Grant No. 107.99-2018.300. The authors thank Hoang-Anh Nguyen and Bich-Quyen Thi Tran at Can Tho University for their valuable assistance provided during the experimental works.
References
ASTM. 2016. Standard test method for pulse velocity through concrete. ASTM C597. West Conshohocken, PA: ASTM.
ASTM. 2020. Standard test method for compressive strength of hydraulic cement mortars (using 2-in. or [50 mm] cube specimens). ASTM C109. West Conshohocken, PA: ASTM.
Carmona-Quiroga, P. M., and M. T. Blanco-Varela. 2013. “Ettringite decomposition in the presence of barium carbonate.” Cem. Concr. Res. 52 (Oct): 140–148. https://doi.org/10.1016/j.cemconres.2013.05.021.
Chatveera, B., and P. Lertwattanaruk. 2014. “Evaluation of nitric and acetic acid resistance of cement mortars containing high-volume black rice husk ash.” J. Environ. Manage. 133 (Jan): 365–373. https://doi.org/10.1016/j.jenvman.2013.12.010.
Chen, C.-T., H.-A. Nguyen, T.-P. Chang, T.-R. Yang, and T.-D. Nguyen. 2015. “Performance and microstructural examination on composition of hardened paste with no-cement SFC binder.” Constr. Build. Mater. 76 (Feb): 264–272. https://doi.org/10.1016/j.conbuildmat.2014.11.032.
Chi, M. 2016. “Synthesis and characterization of mortars with circulating fluidized bed combustion fly ash and ground granulated blast-furnace slag.” Constr. Build. Mater. 123 (Oct): 565–573. https://doi.org/10.1016/j.conbuildmat.2016.07.071.
Chindaprasirt, P., P. Kanchanda, A. Sathonsaowaphak, and H. T. Cao. 2007. “Sulfate resistance of blended cements containing fly ash and rice husk ash.” Constr. Build. Mater. 21 (6): 1356–1361. https://doi.org/10.1016/j.conbuildmat.2005.10.005.
El Didamony, H., H. H. Assal, T. M. El Sokkary, and H. A. Abdel Gawwad. 2012. “Kinetics and physico-chemical properties of alkali activated blast-furnace slag/basalt pastes.” HBRC J. 8 (3): 170–176. https://doi.org/10.1016/j.hbrcj.2012.10.002.
Enshassi, A., B. Kochendoerfer, and E. Rizq. 2014. “An evaluation of environmental impacts of construction projects.” Revista Ingeniería de Construcción 29 (3): 234–254. https://doi.org/10.4067/S0718-50732014000300002.
Frías-Rojas, M., M. I. Sánchez-de-Rojas-Gómez, C. Medina-Martínez, and E. Villar-Cociña. 2017. “New trends for nonconventional cement-based materials: Industrial and agricultural waste.” In Sustainable and nonconventional construction materials using inorganic bonded fiber composites, 165–183. Sawston, UK: Woodhead. https://doi.org/10.1016/B978-0-08-102001-2.00007-3.
Huynh, T. P., V. H. Vu, L. A. T. Bui, and H. H. G. Pham. 2020. “Development of a cementless eco-binder as an alternative to traditional Portland cement in Construction activities.” J. Sci. Technol. Civ. Eng. 14 (3): 40–52. https://doi.org/10.31814/stce.nuce2020-14(3)-04.
Iribarne, J., A. Iribarne, J. Blondin, and E. J. Anthony. 2001. “Hydration of combustion ashes—A chemical and physical study.” Fuel 80 (6): 773–784. https://doi.org/10.1016/S0016-2361(00)00158-7.
Lanzón, M., and P. A. García-Ruiz. 2012. “Effect of citric acid on setting inhibition and mechanical properties of gypsum building plasters.” Constr. Build. Mater. 28 (1): 506–511. https://doi.org/10.1016/j.conbuildmat.2011.06.072.
Lei, Y., Q. Zhang, C. Nielsen, and K. He. 2011. “An inventory of primary air pollutants and emissions from cement production in China, 1990–2020.” Atmos. Environ. 45 (1): 147–154. https://doi.org/10.1016/j.atmosenv.2010.09.034.
Li, D., X. Wu, J. Shen, and Y. Wang. 2000. “The influence of compound admixtures on the properties of high-content slag cement.” Cem. Concr. Res. 30 (1): 45–50. https://doi.org/10.1016/S0008-8846(99)00210-0.
Li, X.-G., Q.-B. Chen, B.-G. Ma, J. Huang, S.-W. Jian, and B. Wu. 2012. “Utilization of modified CFBC desulfurization ash as an admixture in blended cements: Physico-mechanical and hydration characteristics.” Fuel 102 (Mar): 674–680. https://doi.org/10.1016/j.fuel.2012.07.010.
Lin, K.-L., N.-F. Wang, J.-L. Shie, T.-C. Lee, and C. Lee. 2008. “Elucidating the hydration properties of paste containing thin film transistor liquid crystal display waste glass.” J. Hazard. Mater. 159 (2–3): 471–475. https://doi.org/10.1016/j.jhazmat.2008.02.044.
Lodeiro, I. G., D. E. Macphee, A. Palomo, and A. Fernández-Jiménez. 2009. “Effect of alkalis on fresh gels. FTIR analysis.” Cem. Concr. Res. 39 (3): 147–153. https://doi.org/10.1016/j.cemconres.2009.01.003.
Moayedi, H., B. Aghel, M. M. Abdullahi, H. Nguyen, and A. S. A. Rashid. 2019. “Applications of rice husk ash as green and sustainable biomass.” J. Cleaner Prod. 237 (Nov): 117851. https://doi.org/10.1016/j.jclepro.2019.117851.
Muthukrishnan, S., S. Gupta, and H. W. Kua. 2019. “Application of rice husk biochar and thermally treated low silica rice husk ash to improve physical properties of cement mortar.” Theor. Appl. Fract. Mech. 104 (Dec): 102376. https://doi.org/10.1016/j.tafmec.2019.102376.
Nguyen, H.-A., T.-P. Chang, J.-Y. Shih, C.-T. Chen, and T.-D. Nguyen. 2016. “Engineering properties and durability of high-strength self-compacting concrete with no-cement SFC binder.” Constr. Build. Mater. 106 (Mar): 670–677. https://doi.org/10.1016/j.conbuildmat.2015.12.163.
Nguyen, T. D., T. P. Chang, and C. T. Chen. 2015. “Hydration process and compressive strength of slag-CFBC fly ash materials without portland cement.” J. Mater. Civ. Eng. 27 (7): 1–9. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001177.
Nguyen, T. D., T. P. Chang, and T. R. Yang. 2014. “Performance evaluation of an eco-binder made with slag and CFBC fly ash.” J. Mater. Civ. Eng. 26 (12): 1–9. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001019.
Olivier, J. G. J., G. Janssens-Maenhout, M. Muntean, and J. A. H. W. Peters. 2014. “Trends in global emissions: 2014 Report.” https://edgar.jrc.ec.europa.eu/news_docs/jrc-2014-trends-in-global-co2-emissions-2014-report-93171.pdf.
Paaver, P., P. Paiste, M. Liira, and K. Kirsimäe. 2021. “Mechanical activation of the Ca-rich circulating fluidized bed combustion fly ash: Development of an alternative binder system.” Minerals 11 (1): 3. https://doi.org/10.3390/min11010003.
Panzera, T. H., A. L. Christoforo, F. de Paiva Cota, P. H. R. Borges, and C. R. Bowen. 2011. “Ultrasonic pulse velocity evaluation of cementitious materials.” In Advances in composite materials—Analysis of natural and man-made materials. London: InTech Publisher.
Parron-Rubio, M. E., F. Perez-Garcia, A. Gonzalez-Herrera, M. J. Oliveira, and M. D. Rubio-Cintas. 2019. “Slag substitution as a cementing material in concrete: Mechanical, physical and environmental properties.” Materials 12 (18): 2845. https://doi.org/10.3390/ma12182845.
Payá, J., J. Monzó, M. V. Borrachero, S. Velázquez, and M. Bonilla. 2003. “Determination of the pozzolanic activity of fluid catalytic cracking residue. Thermogravimetric analysis studies on FC3R–lime pastes.” Cem. Concr. Res. 33 (7): 1085–1091. https://doi.org/10.1016/S0008-8846(03)00014-0.
Poon, C. S., S. C. Kou, L. Lam, and Z. S. Lin. 2001. “Activation of fly ash/cement systems using calcium sulfate anhydrite ().” Cem. Concr. Res. 31 (6): 873–881. https://doi.org/10.1016/S0008-8846(01)00478-1.
Rossen, J. E., and K. L. Scrivener. 2017. “Optimisation of SEM-EDS to determine the composition in matured cement paste samples.” Mater. Charact. 123 (Jan): 294–306. https://doi.org/10.1016/j.matchar.2016.11.041.
Rust, D., R. Rathbone, K. C. Mahboub, and T. Robl. 2012. “Formulating low-energy cement products.” J. Mater. Civ. Eng. 24 (9): 1125–1131. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000456.
Salain, I. M. A. K., P. Clastres, J. M. Bursi, and C. Pellisser. 2001. Circulating fluidized bed combustion ashes as an activator of ground vitrified blast furnace slag, 225–244. Farmington Hills, MI: American Concrete Institute.
Sandhu, R. K., and R. Siddique. 2017. “Influence of rice husk ash (RHA) on the properties of self-compacting concrete: A review.” Constr. Build. Mater. 153 (Oct): 751–764. https://doi.org/10.1016/j.conbuildmat.2017.07.165.
Shah, S. P., and K. Wang. 2004. “Development of ‘green’ cement for sustainable concrete using cement kiln dust and fly ash.” In Proc., Int. Workshop on Sustainable Development and Concrete Technology. Ames, IA: Lowa State Univ.
Shen, Y., J. Qian, and Z. Zhang. 2013. “Investigations of anhydrite in CFBC fly ash as cement retarders.” Constr. Build. Mater. 40 (8): 672–678. https://doi.org/10.1016/j.conbuildmat.2012.11.056.
Sheng, G., Q. Li, and J. Zhai. 2012. “Investigation on the hydration of CFBC fly ash.” Fuel 98 (Aug): 61–66. https://doi.org/10.1016/j.fuel.2012.02.008.
Siddiqi, Z. A., M. A. Chaudhry, and M. Ashraf. 2002. “Effects of construction activities on environment.” Challenges Concr. Constr. 5 (3): 23–32. https://doi.org/10.1680/scc.31777.0003.
Siddique, S., and J. G. Jang. 2020. “Effect of CFBC ash as partial replacement of PCC ash in alkali-activated material.” Constr. Build. Mater. 244 (May): 118383. https://doi.org/10.1016/j.conbuildmat.2020.118383.
Suhendro, B. 2014. “Toward green concrete for better sustainable environment.” Procedia Eng. 95 (Jan): 305–320. https://doi.org/10.1016/j.proeng.2014.12.190.
TCVN (Tiêu Chuẩn Việt Nam). 2011. Highly activity pozzolanic admixtures for concrete and mortar—Silicafume and rice husk ash. Vietnam: Ministry of Construction.
TCVN (Tiêu Chuẩn Việt Nam). 2016. Ground granulated blast-furnace slag for concrete and mortar. Vietnam: Ministry of Science and Technology.
Thomas, B. S. 2018. “Green concrete partially comprised of rice husk ash as a supplementary cementitious material—A comprehensive review.” Renewable Sustainable Energy Rev. 82 (3): 3913–3923. https://doi.org/10.1016/j.rser.2017.10.081.
Wang, K.-S., K.-L. Lin, and B.-Y. Tzeng. 2003. “Latent hydraulic reactivity of blended cement incorporating slag made from municipal solid waste incinerator fly ash.” J. Air Waste Manage. Assoc. 53 (11): 1340–1346. https://doi.org/10.1080/10473289.2003.10466310.
Zahedi, M. 2019. “Evaluating the use of fluidized bed combustion fly ash as concrete pozzolan.” Ph.D. dissertation, Dept. of Civil Engineering, Pennsylvania State Univ.
Zhou, M., P. Chen, X. Chen, X. Ge, and Y. Wang. 2020. “Study on hydration characteristics of circulating fluidized bed combustion fly ash (CFBCA).” Constr. Build. Mater. 251 (Aug): 118993. https://doi.org/10.1016/j.conbuildmat.2020.118993.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Dec 28, 2020
Accepted: Jul 21, 2021
Published online: Dec 28, 2021
Published in print: Mar 1, 2022
Discussion open until: May 28, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.