Diffusion Phenomenon between Two Different Bitumens from Mechanical Analysis
Publication: Journal of Materials in Civil Engineering
Volume 34, Issue 3
Abstract
The use of reclaimed asphalt pavement (RAP) in hot asphalt mixtures has been investigated widely, mainly to increase the amount of RAP incorporated into new asphalt mixtures as secondary material. A key point to successfully increase the amount of RAP in mixtures is a comprehensive understanding of the blending between different bitumens, such as old and fresh bitumen. This paper introduces a mechanical model to simulate the diffusion phenomenon between two different bitumens on the basis of their rheological properties. A double-layer dynamic shear rheometer (DSR) specimen with a 25 mm diameter and 0.5 mm total thickness in plate–plate configuration was prepared by superposing two 0.25-mm-thick layers, each composed of a different bitumen. The evolution over time of the equivalent shear complex modulus of the whole double-layer specimen was investigated by performing a series of frequency sweeps at 50°C every . The time-dependent evolution of the equivalent modulus was modeled by considering an intermediate layer, composed of fully blended bitumen, at the interface between the two layers of the two base bitumens. The thickness of the intermediate layer increased as a function of time, due to diffusion. The validity of the model was confirmed by a frequency-independent thickness of the intermediate layer. Extrapolating the results, the model gives an indication of the blending of the two bitumens in the long-term, and the findings may suggest an interaction between different bitumens in asphalt mixtures containing RAP. The results are promising for the development of a more-refined mechanical model.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article. Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
We thank Paolini Massimo from Valli Zabban Spa for support and the supply of the bitumens.
References
Baaj, H., M. Ech, N. Tapsoba, C. Sauzeat, and H. Di Benedetto. 2013. “Thermomechanical characterisation of asphalt mixtures modified with high contents of asphalt shingle modifier (ASM) and reclaimed asphalt pavement (RAP).” Mater. Struct. 46: 1747–1763. https://doi.org/10.1617/s11527-013-0015-7.
Bokstein, B. S., M. I. Mendelev, and D. J. Srolovitz. 2005. Thermodynamics and kinetics in Material Science: A short course. Oxford, UK: Oxford University Press.
Bonaquist, R. 2007. “Can I Run More RAP?” HMAT: Hot Mix Asphalt Technol. 12 (5): 11–13.
Bressi, S., A. Carter, N. Bueche, and A.-G. Dumont. 2016. “Impact of different ageing levels on binder rheology.” Int. J. Pavement Eng. 17 (5): 403–413. https://doi.org/10.1080/10298436.2014.993197.
Bressi, S., M. C. Cavalli, M. N. Partl, G. Tebaldi, A. G. Dumont, and L. D. Poulikakos. 2015. “Particle clustering phenomena in hot asphalt mixtures with high content of reclaimed asphalt pavements.” Constr. Build. Mater. 100 (Dec): 207–217. https://doi.org/10.1016/j.conbuildmat.2015.09.052.
CEN (European Committee for Standardization). 2015a. Bitumen and bituminous binders. Determination of needle penetration. EN 1426:2015. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2015b. Bitumen and bituminous binders. Determination of softening point. Ring and ball method. EN 1427:2015. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2015c. Bitumen and bituminous binders—Determination of the resistance to hardening under influence of heat and air—Part 1: RTFOT method. EN 12607-1:2015. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2018. Bitumen and bituminous binders—Determination of dynamic viscosity of bitumen and bituminous binders by the cone and plate method. EN 13702-1:2018. Brussels, Belgium: CEN.
Cong, P., H. Hao, Y. Zhang, W. Luo, and D. Yao. 2016. “Investigation of diffusion of rejuvenator in aged asphalt.” Int. J. Pavement Res. Technol. 9 (4): 280–288. https://doi.org/10.1016/j.ijprt.2016.08.001.
Ding, Y., B. Huang, X. Shu, Y. Zhang, and M. E. Woods. 2016. “Use of molecular dynamics to investigate diffusion between virgin and aged asphalt binders.” Fuel 174 (Jun): 267–273. https://doi.org/10.1016/j.fuel.2016.02.022.
Guo, M., Y. Tan, L. Wang, and Y. Hou. 2017. “Diffusion of asphaltene, resin, aromatic and saturate components of asphalt on mineral aggregates surface: Molecular dynamics simulation.” Supplement, Road Mater. Pavement Des. 18 (S3): 149–158. https://doi.org/10.1080/14680629.2017.1329870.
Jiménez del Barco Carrión, A. J. D., D. Lo Presti, and G. D. Airey. 2015. “Binder design of high RAP content hot and warm asphalt mixture wearing courses.” Supplement, Road Mater. Pavement Des. 16 (S1): 460–474. https://doi.org/10.1080/14680629.2015.1029707.
Kandhal, P. S. 1997. “Recycling of asphalt pavements—An overview.” J. Assoc. Asphalt Paving Technol. 66: 686–703.
Karlsson, R., U. Isacsson, and J. Ekblad. 2007. “Rheological characterisation of bitumen diffusion.” J. Mater. Sci. 42 (1): 101–108. https://doi.org/10.1007/s10853-006-1047-y.
Kaseer, F., E. Arámbula-Mercado, L. Garcia Cucalon, and A. Epps Martin. 2020. “Performance of asphalt mixtures with high recycled materials content and recycling agents.” Int. J. Pavement Eng. 21 (7): 863–877. https://doi.org/10.1080/10298436.2018.1511990.
Kriz, P., D. L. Grant, B. A. Veloza, M. J. Gale, A. G. Blahey, J. H. Brownie, R. D. Shirts, and S. Maccarrone. 2014. “Blending and diffusion of reclaimed asphalt pavement and virgin asphalt binders.” Supplement, Road Mater. Pavement Des. 15 (S1): 78–112. https://doi.org/10.1080/14680629.2014.927411.
Lo Presti, D., A. Jiménez del Barco Carrión, G. Airey, and E. Hajj. 2016. “Towards 100% recycling of reclaimed asphalt in road surface courses: Binder design methodology and case studies.” J. Cleaner Prod. 131 (Sep): 43–51. https://doi.org/10.1016/j.jclepro.2016.05.093.
Mangiafico, S., H. Di Benedetto, C. Sauzéat, F. Olard, S. Pouget, and L. Planque. 2013. “Influence of reclaimed asphalt pavement content on complex modulus of asphalt binder blends and corresponding mixes: Experimental results and modelling.” Supplement, Road Mater. Pavement Des. 14 (S1): 132–148. https://doi.org/10.1080/14680629.2013.774751.
Mangiafico, S., C. Sauzéat, and H. Di Benedetto. 2019. “Comparison of different blending combinations of virgin and RAP-extracted binder: Rheological simulations and statistical analysis.” Constr. Build. Mater. 197 (Feb): 454–463. https://doi.org/10.1016/j.conbuildmat.2018.11.217.
Nahar, S. N., M. Mohajeri, A. J. M. Schmets, A. Scarpas, M. F. C. van de Ven, and G. Schitter. 2013. “First observation of blending-zone morphology at interface of reclaimed asphalt binder and virgin bitumen.” Transp. Res. Rec. 2370 (1): 1–9. https://doi.org/10.3141/2370-01.
Navaro, J., D. Bruneau, I. Drouadaine, J. Colin, A. Dony, and J. Cournet. 2012. “Observation and evaluation of the degree of blending of reclaimed asphalt concretes using microscopy image analysis.” Constr. Build. Mater. 37 (Dec): 135–143. https://doi.org/10.1016/j.conbuildmat.2012.07.048.
Rad, F. Y., N. R. Sefidmazgi, and H. Bahia. 2014. “Application of diffusion mechanism: Degree of blending between fresh and recycled asphalt pavement binder in dynamic shear rheometer.” Transp. Res. Rec. 2444 (1): 71–77. https://doi.org/10.3141/2444-08.
Shirodkar, P., Y. Mehta, A. Nolan, K. Sonpal, A. Norton, C. Tomlinson, E. Dubois, P. Sullivan, and R. Sauber. 2011. “A study to determine the degree of partial blending of reclaimed asphalt pavement (RAP) binder for high RAP hot mix asphalt.” Constr. Build. Mater. 25 (1): 150–155. https://doi.org/10.1016/j.conbuildmat.2010.06.045.
Wu, J., Q. Liu, S. Yang, M. Oeser, and C. Ago. 2021. “Study of migration and diffusion during the mixing process of asphalt mixtures with RAP.” Road Mater. Pavement Des. 22 (7): 1578–1593. https://doi.org/10.1080/14680629.2019.1710237.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Mar 1, 2021
Accepted: Jul 19, 2021
Published online: Dec 23, 2021
Published in print: Mar 1, 2022
Discussion open until: May 23, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.