Preparation of Sludge Ash–Desulfurization Gypsum-Based Backfill Materials Using Microwave Calcination
Publication: Journal of Materials in Civil Engineering
Volume 34, Issue 3
Abstract
Paper mill sludge ash (PMSA), sewage sludge ash (SSA), and desulfurization gypsum (DG) were mixed and calcined by microwave radiation to acquire a product with higher hydration activity. The resulting mixture was used as a supplementary cementitious material to prepare backfill materials for mining. The influence of the mixing ratio of raw materials, microwave parameters, and sample size on the properties and microstructure of the microwave-sintered sludge ash (MSSA) and MSSA-cement pastes was determined. Both the MSSA and the prepared pastes were characterized using X-ray diffraction (XRD), Fourier infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDAX). Results indicated that the minerals in the MSSA were rankinite, mayenite, and belite, which all exhibited relatively high hydration activity and significantly improved the degree of hydration of the MSSA–cement system. As the microwave power and irradiation time increased, the water demand of the MSSA–cement pastes decreased, the setting time decreased, and the compressive strength increased. The MSSA prepared with a small length-to-diameter ratio produced more crystals and gels compared with that prepared with a larger length-to-diameter ratio. The gels mutually fused to form a dense structure, and this further enhanced the strength of the MSSA–cement pastes.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This study was supported by the Science and Technology Research Project of Henan Province (Grant Nos. 212102310398 and 212102310506) and the Doctoral Foundation Project of Henan University of Engineering (Grant No. D2017003). The authors thank the editors and reviewers for their detailed comments and helpful suggestions.
References
Batistella, L., V. Silva, R. C. Suzin, E. Virmond, C. A. Althoff, R. F. P. M. Moreira, and H. J. José. 2015. “Gaseous emissions from sewage sludge combustion in a moving bed combustor.” Waste Manage. 46 (Dec): 430–439. https://doi.org/10.1016/j.wasman.2015.08.039.
Cavdar, A. D., H. Yel, S. Boran, and E. Pesman. 2017. “Cement type composite panels manufactured using paper mill sludge as filler.” Constr. Build. Mater. 142 (1): 410–416. https://doi.org/10.1016/j.conbuildmat.2017.03.099.
Chen, J. N., H. W. Zhang, S. J. Chen, E. T. Cui, Q. F. Zhang, and G. H. Hou. 2018. “Experimental study on preparation of new type cement clinker from industrial raw materials.” [In Chinese.] Bull. Chin. Ceram. Soc. 37 (4): 1288–1293. https://doi.org/10.16552/j.cnki.issn1001-1625.2018.04.026.
Chinese Standardization Administration. 2007. Common portland cement. Beijing: Chinese Standardization Administration.
Chinese Standardization Administration. 2011. Test methods for water requirement of normal consistency, setting time and soundness of the portland cement. Beijing: Chinese Standardization Administration.
Donatello, S., and C. R. Cheeseman. 2013. “Recycling and recovery routes for incinerated sewage sludge ash (ISSA): A review.” Waste Manage. 33 (11): 2328–2340. https://doi.org/10.1016/j.wasman.2013.05.024.
El-Alfi, E. A., and R. A. Gado. 2016. “Preparation of calcium sulfoaluminate-belite cement from marble sludge waste.” Constr. Build. Mater. 113 (15): 764–772. https://doi.org/10.1016/j.conbuildmat.2016.03.103.
Garcés, P., M. P. Carrión, E. García-Alcocel, J. Payá, J. Monzó, and M. V. Borrachero. 2008. “Mechanical and physical properties of cement blended with sewage sludge ash.” Waste Manage. 28 (12): 2495–2502. https://doi.org/10.1016/j.wasman.2008.02.019.
Han, Q., X. J. Ruan, and T. Zhang. 2016. “Study on technology of paper sludge backfilling into paper web.” [In Chinese.] J. Shanxi Univ. Sci. Technol. (Nat. Sci. Ed.) 34 (6): 25–28. https://doi.org/10.3969/j.issn.1000-5811.2016.06.005.
Huang, M. R., H. J. Feng, N. Li, D. S. Shen, Y. Y. Zhou, and Y. F. Jia. 2017. “Addition of large amount of municipal sewage sludge as raw material in cement clinker production.” Environ. Sci. Pollut. Res. 24 (36): 27862–27869. https://doi.org/10.1007/s11356-017-9949-6.
Huang, Y., X. Zhang, Q. Zhang, and S. Nie. 2011. “Backfilling technology of substituting waste and fly ash for coal underground in China coal mining area.” Environ. Eng. Manage. J. 10 (6): 769–775. https://doi.org/10.30638/eemj.2011.104.
Jamshidi, M., A. Jamshidi, N. Mehrdadi, and F. Pacheco-Torgal. 2012. “Mechanical performance and capillary water absorption of sewage sludge ash concrete (SSAC).” Int. J. Sustainable Eng. 5 (3): 228–234. https://doi.org/10.1080/19397038.2011.642020.
Jiang, J., and X. Q. Ma. 2011. “Experimental research of microwave pyrolysis about paper mill sludge.” Appl. Therm. Eng. 31 (17): 3897–3903. https://doi.org/10.1016/j.applthermaleng.2011.07.037.
Kaewwichit, P., J. Junsomboon, P. Chakartnarodom, C. Tippayasam, T. Srichumpong, T. Thavorniti, C. Leonelli, and D. Chaysuwan. 2016. “Development of microwave-assisted sintering of Portland cement raw meal.” J. Cleaner Prod. 142 (Jan): 1–7. https://doi.org/10.1016/j.jclepro.2016.07.009.
Kupwade-Patil, K., S. D. Palkovic, A. Bumajdad, C. Soriano, and O. Büyüköztürk. 2018. “Use of silica fume and natural volcanic ash as a replacement to portland cement: Micro and pore structural investigation using NMR, XRD, FTIR and X-ray microtomography.” Rom. J. Mater. 158 (Jan): 574–590. https://doi.org/10.1016/j.conbuildmat.2017.09.165.
Liang, J., W. Y. Chu, Y. B. Huang, F. L. Li, N. Liu, and J. S. Qian. 2017. “Utilizing decomposed phosphogypsum for the preparation of belite-calcium sulphoaluminate cement.” [In Chinese.] Mater. Rep. 31 (Aug): 1–5. https://doi.org/10.11896/j.issn.1005-023X.2017.024.001.
Lin, K.-L., and C.-Y. Lin. 2005. “Hydration characteristics of waste sludge ash utilized as raw cement material.” Cem. Concr. Res. 35 (10): 1999–2007. https://doi.org/10.1016/j.cemconres.2005.06.008.
Long, S., C. Yan, and J. Dong. 2002. “Microwave-promoted burning of Portland cement clinker.” Cem. Concr. Res. 32 (1): 17–21. https://doi.org/10.1016/S0008-8846(01)00622-6.
Lu, Q. M., S. Zhang, G. Z. Sun, X. Q. Wang, and S. J. Fu. 2021. “Preparation of paste backfill material from mix-calcined sludge ash.” Waste Biomass Valorization 12 (3): 1633–1646. https://doi.org/10.1007/s12649-020-01076-4.
Mamat, N., A. Kusbiantoro, and N. Rahman. 2018. “Hydrochloric acid based pre-treatment on paper mill sludge ash as an alternative source material for geopolymer.” Mater. Today: Proc. 5 (10): 21825–21831. https://doi.org/10.1016/j.matpr.2018.07.038.
Mollah, M. Y. A., M. Kesmez, and D. L. Cocke. 2004. “An X-ray diffraction (XRD) and Fourier transform infrared spectroscopic (FT-IR) investigation of the long-term effect on the solidification/stabilization (S/S) of arsenic(V) in Portland cement type-V.” Sci. Total Environ. 325 (1–3): 255–262. https://doi.org/10.1016/j.scitotenv.2003.09.012.
Piasta, W., and M. Lukawska. 2016. “The effect of sewage sludge ash on properties of cement composites.” Procedia Eng. 161 (Jan): 1018–1024. https://doi.org/10.1016/j.proeng.2016.08.842.
Richard, T., L. Mercury, F. Poulet, and L. d’Hendecourt. 2006. “Diffuse reflectance infrared Ffourier transform spectroscopy as a tool to characterise water in adsorption/confinement situations.” J. Colloid Interface Sci. 304 (1): 125–136. https://doi.org/10.1016/j.jcis.2006.08.036.
Rodríguez, N. H., S. Martínez-Ramírez, M. T. Blanco-Varela, S. Donatello, M. Guillem, J. Puig, C. Fos, E. Larrotcha, and J. Flores. 2013. “The effect of using thermally dried sewage sludge as an alternative fuel on Portland cement clinker production.” J. Cleaner Prod. 52 (1): 94–102. https://doi.org/10.1016/j.jclepro.2013.02.026.
Sun, Q., S. Tian, Q. W. Sun, B. Li, C. Cai, Y. J. Xia, X. Wei, and Q. W. Mu. 2019. “Preparation and microstructure of fly ash geopolymer paste backfill material.” J. Cleaner Prod. 225 (Jul): 376–390. https://doi.org/10.1016/j.jclepro.2019.03.310.
Trezza, M. A., and A. E. Lavat. 2001. “Analysis of the system by FT-IR spectroscopy.” Cem. Concr. Res. 31 (6): 869–872. https://doi.org/10.1016/S0008-8846(01)00502-6.
Wang, K., L. Ren, and L. Q. Yang. 2018. “Excellent carbonation behavior of rankinite prepared by calcining the C-S-H: Potential recycling of waste concrete powders for prefabricated building products.” Materials 11 (8): 1474. https://doi.org/10.3390/ma11081474.
Wang, L. P., Y. Z. Chang, and Q. F. Liu. 2019. “Fate and distribution of nutrients and heavy metals during hydrothermal carbonization of sewage sludge with implication to land application.” J. Cleaner Prod. 225 (Jul): 972–983. https://doi.org/10.1016/j.jclepro.2019.03.347.
Xue, P., A. J. Xu, D. F. He, Q. X. Yang, G. Q. Liu, F. Engström, and B. Björkman. 2016. “Research on the sintering process and characteristics of belite sulphoaluminate cement produced by BOF slag.” Constr. Build. Mater. 122 (Sep): 567–576. https://doi.org/10.1016/j.conbuildmat.2016.06.098.
Yao, Y., and H. Sun. 2012. “A novel silica alumina-based backfill material composed of coal refuse and fly ash.” J. Hazard. Mater. 213 (Apr): 71–82. https://doi.org/10.1016/j.jhazmat.2012.01.059.
Zhang, W. S., J. T. Zhang, J. Y. Ye, J. S. Qian, W. G. Shen, and Z. Y. Wang. 2019. “Structure and activity of dicalcium silicate.” [In Chinese.] J. Chin. Ceram. Soc. 47 (11): 1663–1669. https://doi.org/10.14062/j.issn.0454-5648.2019.11.18.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jul 31, 2020
Accepted: Jul 7, 2021
Published online: Dec 22, 2021
Published in print: Mar 1, 2022
Discussion open until: May 22, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.