Technical Papers
Oct 26, 2021

Compatibility between Polycarboxylate Ether with Different Charge Densities and Cement

Publication: Journal of Materials in Civil Engineering
Volume 34, Issue 1

Abstract

Polycarboxylate ether (PCE) of different charge densities has been synthesized via free radical polymerization. The molecular structure is characterized by gel permeation chromatography (GPC) and proton nuclear magnetic resonance (H1NMR). The interaction between PCE and three different-C3A-content cements has been systematically studied. The results of rheological properties, specifically apparent viscosity and yield stress, demonstrate that there are two cement paste loss stages in cement hydration process. This theory could provide guidance for the design of PCE with slump retention ability. By matching PCE release rate with the cement hydration process, we could ensure a cement paste with smooth and steady slump retention. PCE with moderate charge density shows the best compatibility with cement owing to the smallest differences in adsorption amount in different cements. Moreover, the influence of PCE on the early-age properties of cement paste confirms that the interaction of PCE with C3A or its hydration products determines the compatibility between PCE and cement, especially in the first cement paste loss stage.

Get full access to this article

View all available purchase options and get full access to this article.

Data Availability Statement

All data used to support the findings of the manuscript are included within the manuscript.

Acknowledgments

This work was financed by Key-Area Research and Development Program of Guangdong Province (2019B111105002) and National Science Fund for Distinguished Young Scholars (51825203).

References

Agarwal, S. K., I. Masood, and S. K. Malhotra. 2000. “Compatibility of superplasticizers with different cements.” Constr. Build. Mater. 14 (8): 253–259. https://doi.org/10.1016/S0950-0618(00)00025-8.
Aiad, I. 2003. “Influence of time addition of superplasticizers on the rheological properties of fresh cement pastes.” Cem. Concr. Res. 33 (3): 1229–1234. https://doi.org/10.1016/S0008-8846(03)00037-1.
Alonso, M. M., M. Palacios, and F. Puertas. 2013. “Compatibility between polycarboxylate-based admixtures and blended-cement pastes.” Cem. Concr. Comp. 35 (1): 151–162. https://doi.org/10.1016/j.cemconcomp.2012.08.020.
Anagnostopoulos, C. A. 2014. “Effect of different superplasticisers on the physical and mechanical properties of cement grouts.” Constr. Build. Mater. 50 (15): 162–168. https://doi.org/10.1016/j.conbuildmat.2013.09.050.
Bessaies-Bey, H., R. Baumann, M. Schmitz, M. Radler, and N. Roussel. 2015. “Effect of polyacrylamide on rheology of fresh cement pastes.” Cem. Concr. Res. 76 (Oct): 98–106. https://doi.org/10.1016/j.cemconres.2015.05.012.
Bessaies-Bey, H., R. Baumann, M. Schmitz, M. Radler, and N. Roussel. 2016. “Organic admixtures and cement particles: Competitive adsorption and its macroscopic rheological consequences.” Cem. Concr. Res. 80 (Feb): 1–9. https://doi.org/10.1016/j.cemconres.2015.10.010.
Bey, H. B., J. Hot, R. Baumann, and N. Roussel. 2014. “Consequences of competitive adsorption between polymers on the rheological behaviour of cement pastes.” Cem. Concr. Compos. 54 (Nov): 17–20. https://doi.org/10.1016/j.cemconcomp.2014.05.002.
Burgos-Montes, O., M. Palacios, P. Rivilla, and F. Puertas. 2012. “Compatibility between superplasticizer admixtures and cements with mineral additions.” Constr. Build. Mater. 31 (Jun): 300–309. https://doi.org/10.1016/j.conbuildmat.2011.12.092.
Colombo, A., M. Geiker, H. Justnes, R. A. Lauten, and K. D. Weerdt. 2017. “On the mechanisms of consumption of calcium lignosulfonate by cement paste.” Cem. Concr. Res. 98 (Aug): 1–9. https://doi.org/10.1016/j.cemconres.2017.02.026.
Dalas, F., A. Nonat, S. Pourchet, M. Mosquet, D. Rinaldi, and S. Sabio. 2015a. “Tailoring the anionic function and the side chains of comb-like superplasticizers to improve their adsorption.” Cem. Concr. Res. 67 (Sep): 21–30. https://doi.org/10.1016/j.cemconres.2014.07.024.
Dalas, F., S. Pourchet, D. Rinaldi, A. Nonat, S. Sabio, and M. Mosquet. 2015b. “Modification of the rate of formation and surface area of ettringite by polycarboxylate ether superplasticizers during early C3A-CaSO4 hydration.” Cem. Concr. Res. 69 (Mar): 105–113. https://doi.org/10.1016/j.cemconres.2014.12.007.
Flatt, R. J., and Y. F. Houst. 2001. “A simplified view on chemical effects perturbing the action of superplasticizers.” Cem. Concr. Res. 31 (8): 1169–1176. https://doi.org/10.1016/S0008-8846(01)00534-8.
Flatt R. J., and I. Schober. 2012. “Superplasticizers and the rheology of concrete.” In Understanding the rheology of concrete, edited by N. Roussel, 144–208. Cambridge, MA: Woodhead Publishing.
Gelardi, G., and R. J. Flatt. 2016. “Working mechanisms of water reducers and superplasticizers.” In Science and technology of concrete admixtures, 257–278. Cambridge, MA: Woodhead Publishing.
Giraudeau, C., J.-B. D’Espinose De Lacaillerie, Z. Souguir, A. Nonat, and R. J. Flatt. 2009. “Surface and intercalation chemistry of polycarboxylate copolymers in cementitious systems.” J. Am. Ceram. Soc. 92 (11): 2471–2488. https://doi.org/10.1111/j.1551-2916.2009.03413.x.
Habbaba, A., Z. Dai, and J. Plank. 2014. “Formation of organo-mineral phases at early addition of superplasticizers: The role of alkali sulfates and C3A content.” Cem. Concr. Res. 59 (May): 112–117. https://doi.org/10.1016/j.cemconres.2014.02.007.
Hanehara, S., and K. Yamada. 1999. “Interaction between cement and chemical admixture from the point of cement hydration, absorption behaviour of admixture, and paste rheology.” Cem. Concr. Res. 29 (8): 1159–1165. https://doi.org/10.1016/S0008-8846(99)00004-6.
Hot, J., H. Bessaies-Bey, C. Brumaud, M. Duc, C. Castella, and N. Roussel. 2014. “Adsorbing polymers and viscosity of cement pastes.” Cem. Concr. Res. 63 (Sep): 12–19. https://doi.org/10.1016/j.cemconres.2014.04.005.
Juilland, P., E. Gallucci, R. Flatt, and K. Scrivener. 2010. “Dissolution theory applied to the induction period in alite hydration.” Cem. Concr. Res. 40 (6): 831–844. https://doi.org/10.1016/j.cemconres.2010.01.012.
Ma, B., M. Ma, X. D. Shen, X. R. Li, and X. D. Wu. 2014. “Compatibility between a polycarboxylate superplasticizer and the belite-rich sulfoaluminate cement: Setting time and the hydration properties.” Constr. Build. Mater. 51 (Jan): 47–54. https://doi.org/10.1016/j.conbuildmat.2013.10.028.
Marchon, D., P. Juilland, E. Gallucci, L. Frunz, and R. J. Flatt. 2017. “Molecular and submolecular scale effects of comb-copolymers on tri-calcium silicate reactivity: Toward molecular design.” J. Am. Ceram. Soc. 100 (3): 817–841. https://doi.org/10.1111/jace.14695.
Mardani-Aghabaglou, A., B. Felekoğlu, and K. Ramyar. 2017. “Effect of cement C3A content on properties of cementitious systems containing high-range water-reducing admixture.” J. Mater. Civ. Eng. 29 (8): 04017066. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001925.
NSPRC (National Standards of People’s Republic of China). 2012. Method for testing uniformity of concrete admixture. GB/T8077-2012. Beijing: NSPRC.
Plank, J., Z. Dai, and P. R. Andres. 2006a. “Preparation and characterization of new Ca-Al-polycarboxylate layered double hydroxides.” Mater. Lett. 60 (29–30): 3614–3617. https://doi.org/10.1016/j.matlet.2006.03.070.
Plank, J., H. Keller, P. R. Andres, and Z. M. Dai. 2006b. “Novel organo-mineral phases obtained by intercalation of maleic anhydride-allyl ether copolymers into layered calcium aluminum hydrates.” Inorg. Chim. Acta 359 (15): 4901–4908. https://doi.org/10.1016/j.ica.2006.08.038.
Plank, J., and B. Sachsenhauser. 2009. “Experimental determination of the effective anionic charge density of polycarboxylate superplasticizers in cement pore solution.” Cem. Concr. Res. 39 (1): 1–5. https://doi.org/10.1016/j.cemconres.2008.09.001.
Pourchet, S., I. Pochard, F. Brunel, and D. Perrey. 2013. “Chemistry of the calcite/water interface: Influence of sulfate ions and consequences in terms of cohesion forces.” Cem. Concr. Res. 52 (Oct): 22–30. https://doi.org/10.1016/j.cemconres.2013.04.002.
Prince, W., M. Espagne, and P.-C. Aïtcin. 2003. “Ettringite formation: A crucial step in cement superplasticizer compatibility.” Cem. Concr. Res. 33 (5): 635–641. https://doi.org/10.1016/S0008-8846(02)01042-6.
Ridi, F., E. Fratini, P. Luciani, F. Winnefeld, and P. Baglioni. 2012. “Tricalcium silicate hydration reaction in the presence of comb-shaped superplasticizers: Boundary nucleation and growth model applied to polymer-modified pastes.” J. Phys. Chem. C 116 (20): 10887–10895. https://doi.org/10.1021/jp209156n.
Scrivener, K. L., T. Füllmann, E. Gallucci, G. Walenta, and E. Bermejo. 2004. “Quantitative study of Portland cement hydration by X-ray diffraction/Rietveld analysis and independent methods.” Cem. Concr. Res. 34 (9): 1541–1547. https://doi.org/10.1016/j.cemconres.2004.04.014.
Walenta, G., T. Füllmann, and M. Gimenez. 2001. “Quantitative Rietveld analysis of cement and clinker.” Int. Cem. Rev. 6 (25): 51–54.
Wang, X., Q. Ran, Y. Yang, X. Shu, and C. Yu. 2016. “Influence of sequence structure of polycarboxylate superplasticizers on early age properties of cement paste.” J. Mater. Civ. Eng. 28 (10): 04016112. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001627.
Wang, X. M., J. G. Zhang, Y. Yang, X. Shu, and Q. P. Ran. 2018. “Effect of side chains in block polycarboxylate superplasticizers on early age properties of cement paste.” J. Therm. Anal. Calorim. 133 (3): 1439–1446. https://doi.org/10.1007/s10973-018-7231-x.
Wei, Y. Q., W. Yao, X. M. Xing, and M. J. Wu. 2012. “Quantitative evaluation of hydrated cement modified by silica fume using QXRD, 27Al MAS NMR, TG–DSC and selective dissolution techniques.” Constr. Build. Mater. 36 (Nov): 925–932. https://doi.org/10.1016/j.conbuildmat.2012.06.075.
Zhang, Q., Q. P. Ran, H. X. Zhao, X. Shu, and Y. Yang. 2017. “Effect of counter-ions on comb-like polycarboxylate conformation in aqueous solutions.” J. Dispersion Sci. Technol. 38 (5): 721–728. https://doi.org/10.1080/01932691.2016.1192043.
Zhang, Y. R., X. M. Kong, Z. B. Lu, Z. C. Lu, and S. S. Hou. 2015. “Effects of the charge characteristics of polycarboxylate superplasticizers on the adsorption and the retardation in cement pastes.” Cem. Concr. Res. 67 (Sep): 184–196. https://doi.org/10.1016/j.cemconres.2014.10.004.
Zingg, A., F. Winnefeld, L. Holzer, J. Pakusch, S. Becker, R. Figi, and L. Gauckler. 2009. “Interaction of polycarboxylate-based superplasticizers with cements containing different C3A amounts.” Cem. Concr. Comp. 31 (3): 153–162. https://doi.org/10.1016/j.cemconcomp.2009.01.005.

Information & Authors

Information

Published In

Go to Journal of Materials in Civil Engineering
Journal of Materials in Civil Engineering
Volume 34Issue 1January 2022

History

Received: Oct 8, 2019
Accepted: May 20, 2021
Published online: Oct 26, 2021
Published in print: Jan 1, 2022
Discussion open until: Mar 26, 2022

Permissions

Request permissions for this article.

Authors

Affiliations

Xiumei Wang
Senior Engineer, Key Laboratory of High Performance Civil Engineering Materials, Jiangsu Sobute New Materials Co., Ltd., Nanjing, Jiangsu 211103, China.
Senior Engineer, Key Laboratory of High Performance Civil Engineering Materials, Jiangsu Sobute New Materials Co., Ltd., Nanjing, Jiangsu 211103, China (corresponding author). Email: [email protected]
Jiangang Zhang
Senior Engineer, Key Laboratory of High Performance Civil Engineering Materials, Jiangsu Sobute New Materials Co., Ltd., Nanjing, Jiangsu 211103, China.
Xin Shu
Senior Engineer, Key Laboratory of High Performance Civil Engineering Materials, Jiangsu Sobute New Materials Co., Ltd., Nanjing, Jiangsu 211103, China.
Qianping Ran
Professor, School of Material Science and Engineering, Southeast Univ., Nanjing 211103, China.
Shenyou Song
Vice-Director, Shen-Zhong Linked Ministration Center, Shenzhen 0760-528449, China.

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share