Improving the Electromagnetic Properties of Bitumen Using Composites
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 11
Abstract
It is important to further improve the microwave absorption capacity of bitumen to promote the application of microwave heating in pavement maintenance. composites were prepared as microwave-enhanced materials based on the impedance matching theory and the limitation of traditional single-phase microwave absorber. A network analyzer was used to measure the electromagnetic parameters. The rheological properties were evaluated and the morphological characteristics of composites were studied. The process of microwave-heating of bituminous concrete was simulated and the heating rate and heat distribution were analyzed intensively. The results showed that the reflection loss of bitumen containing composites reached (the microwave reflectivity was only 1%), which is 13.4 dB lower than that of the bitumen containing SiC. The average heating rate of the bituminous concrete containing optimum composites was , which is 1.88 times of that of pure bituminous concrete, and higher than that of bituminous concrete containing either SiC or . composites improved the thermal conductivity of bituminous concrete, as well. The rheological properties of bitumen did not decline. The microstructure of composites contributed to microwave absorption. It can be concluded that the bitumen containing composites has stronger microwave-absorption ability compared with the bitumen containing a single-phase absorber. The bituminous concrete with composites had a greater microwave heating effect, and the optimum mass ratio of SiC to was .
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This study was funded by National Natural Science Foundation of China (NSERC) (File No. 52078499).
References
AASHTO. 2012a. Determining the rheological properties of asphalt binder using a dynamic shear rheometer (DSR). AASHTO T 315. Washington, DC: AASHTO.
AASHTO. 2012b. Standard method of test for multiple stress creep recovery (MSCR) test of asphalt binder using a dynamic shear rheometer (DSR). AASHTO TP 70-12. Washington, DC: AASHTO.
AASHTO. 2014. Performance-graded asphalt binder using multiple stress creep recovery (MSCR) test. AASHTO M 332. Washington, DC: AASHTO.
Benedetto, A., and A. Calvi. 2013. “A pilot study on microwave heating for production and recycling of road pavement materials.” Constr. Build. Mater. 44 (5): 351–359. https://doi.org/10.1016/j.conbuildmat.2013.02.082.
Bi, Y., S. Wu, J. Pei, Y. Wen, and R. Li. 2020. “Correlation analysis between aging behavior and rheological indices of asphalt binder.” Constr. Build. Mater. 264 (12): 120176. https://doi.org/10.1016/j.conbuildmat.2020.120176.
Chen, Y.-J., F. Zhang, G.-G. Zhao, X.-Y. Fang, H.-B. Jin, P. Gao, C.-L. Zhu, M.-S. Cao, and G. Xiao. 2010. “Synthesis, multi-nonlinear dielectric resonance, and excellent electromagnetic absorption characteristics of core/shell nanorods.” J. Phys. Chem. C 114 (20): 9239–9244. https://doi.org/10.1021/jp912178q.
Dong, Z., T. Zhou, H. Luan, R. C. Williams, P. Wang, and Z. Leng. 2019. “Composite modification mechanism of blended bio-asphalt combining styrene-butadiene-styrene with crumb rubber: A sustainable and environmental-friendly solution for wastes.” J. Cleaner Prod. 214 (3): 593–605. https://doi.org/10.1016/j.jclepro.2019.01.004.
Gallego, J., M. A. del Val, V. Contreras, and A. Páez. 2013. “Heating asphalt mixtures with microwaves to promote self-healing.” Constr. Build. Mater. 42 (5): 1–4. https://doi.org/10.1016/j.conbuildmat.2012.12.007.
Gao, J., H. Guo, X. Wang, P. Wang, Y. Wei, Z. Wang, Y. Huang, and B. Yang. 2018. “Microwave deicing for asphalt mixture containing steel wool fibers.” J. Cleaner Prod. 206 (1): 1110–1122. https://doi.org/10.1016/j.jclepro.2018.09.223.
Gao, J., A. Sha, Z. Wang, Z. Tong, and Z. Liu. 2017. “Utilization of steel slag as aggregate in bitumen composites for microwave deicing.” J. Cleaner Prod. 152 (5): 429–442. https://doi.org/10.1016/j.jclepro.2017.03.113.
Gao, J., Z. W. Zhang, Z. Q. Huang, A. M. Sun, Z. J. Wang, and W. Jin. 2016. “A review of electromagnetic wave absorbing materials used in microwave deicing pavement.” [In Chinese.] Mater. Rep. 30 (4): 87–95.
Gao, X., X. Liu, P. Yan, X. Li, and H. Li. 2019. “Numerical analysis and optimization of the microwave inductive heating performance of water film.” Int. J. Heat Mass Transfer 139 (8): 17–30. https://doi.org/10.1016/j.ijheatmasstransfer.2019.04.122.
González, A., J. Valderrama, and J. Norambuena-Contreras. 2019. “Microwave crack healing on conventional and modified asphalt mixtures with different additives: An experimental approach.” Supplement, Road Mater. Pavement Des. 20 (S1): S149–S162. https://doi.org/10.1080/14680629.2019.1587493.
Hong, Y., B. Lin, H. Li, H. Dai, C. Zhu, and H. Yao. 2016. “Three-dimensional simulation of microwave heating coal sample with varying parameters.” Appl. Therm. Eng. 93 (8): 1145–1154. https://doi.org/10.1016/j.applthermaleng.2015.10.041.
Huang, J., G. Xu, G. Hu, M. Kizil, and Z. Chen. 2018. “A coupled electromagnetic irradiation, heat and mass transfer model for microwave heating and its numerical simulation on coal.” Fuel Process. Technol. 177 (5): 237–245. https://doi.org/10.1016/j.fuproc.2018.04.034.
Huang, L., X. Liu, and R. Yu. 2017. “Enhanced microwave absorption properties of rod-shaped composites.” Prog. Nat. Sci. 28 (9): 288–295. https://doi.org/10.1016/j.pnsc.2017.04.002.
Huang, Y., J. Ji, Y. Chen, X. Li, J. He, X. W. Cheng, S. L. He, Y. Liu, and J. P. Li. 2019. “Broadband microwave absorption of composites enhanced by interfacial polarization and impedance matching.” Mixtures Part B 163 (4): 598–605. https://doi.org/10.1016/j.compositesb.2019.01.008.
International Asphalt Resource Recycling Conference. 2013. “International asphalt resource recycling conference was held in Beijing.” [In Chinese.] Accessed November 5, 2013. http://green.sohu.com/20131105/n389583645.shtml.
Jafari, M., and A. Babazadeh. 2016. “Evaluation of polyphosphoric acid-modified binders using multiple stress creep and recovery and linear amplitude sweep tests.” Road Mater. Pavement 17 (4): 859–876. https://doi.org/10.1080/14680629.2015.1132631.
Jahanbakhsh, H., M. M. Karimi, H. Naseri, and F. M. Nejad. 2019. “Sustainable asphalt concrete containing high reclaimed asphalt pavements and recycling agents: Performance assessment, cost analysis, and environmental impact.” J. Cleaner Prod. 244 (Jan): 118837. https://doi.org/10.1016/j.jclepro.2019.118837.
Ji, J., Y. Huang, J. Yin, X. Zhao, X. Cheng, S. He, X. Li, J. He, and J. Liu. 2018. “Synthesis and electromagnetic and microwave absorption properties of monodispersive composites.” ACS Appl. Nano Mater. 1 (8): 3935–3944. https://doi.org/10.1021/acsanm.8b00703.
Jiang, J., D. Li, D. Geng, J. An, J. He, W. Liu, and Z. Zhang. 2014. “Microwave absorption properties of core double-shell nanocomposites.” Nanoscale 6 (8): 3967–3971. https://doi.org/10.1039/C3NR04087A.
Jiang, L., Z. Wang, D. Li, D. Geng, Y. Wang, J. An, J. He, W. Liu, and Z. Zhang. 2015. “Excellent microwave-absorption performances by matched magnetic-dielectric properties in double-shelled Co/C/polyaniline nanocapsules.” RSC Adv. 403 (5): 84–92.
Li, C., S. Wu, Z. Chen, B. Shu, Y. Li, Y. Xiao, and Q. Liu. 2018a. “Synthesis of -decorated Mg-Al layered double hydroxides magnetic nanosheets to improve anti-ultraviolet aging and microwave absorption properties used in bitumen materials.” Constr. Build. Mater. 220 (3): 320–328. https://doi.org/10.1016/j.conbuildmat.2019.06.032.
Li, C., S. Wu, Z. Chen, G. Tao, and Y. Xiao. 2018b. “Enhanced heat release and self-healing properties of steel slag filler based on bitumen materials under microwave irradiation.” Constr. Build. Mater. 193 (7): 32–41. https://doi.org/10.1016/j.conbuildmat.2018.10.193.
Li, C., S. Wu, Z. Chen, G. Tao, and Y. Xiao. 2018c. “Improved microwave heating and healing properties of bitumen by using nanometer microwave-absorbers.” Constr. Build. Mater. 189 (11): 757–767. https://doi.org/10.1016/j.conbuildmat.2018.09.050.
Li, C., S. Wu, B. Shu, Y. Li, and Z. Chen. 2019a. “Microwave absorption and anti-aging properties of modified bitumen contained SiC attached layered double hydroxides.” Constr. Build. Mater. 227 (4): 116714. https://doi.org/10.1016/j.conbuildmat.2019.116714.
Li, J., S. Yang, Y. Liu, Y. Muhammad, Z. B. Su, and J. Yang. 2019b. “Studies on the properties of modified heavy calcium carbonate and SBS composite modified bitumen.” Constr. Build. Mater. 218 (7): 413–423. https://doi.org/10.1016/j.conbuildmat.2019.05.139.
Li, Z., X. Wei, F. Luo, W. Zhou, and Y. Hao. 2014. “Microwave dielectric properties of powders synthesized by solid state reaction.” Ceram. Int. 40 (1): 2545–2549. https://doi.org/10.1016/j.ceramint.2013.07.144.
Lin, B., H. Li, Z. Chen, C./ Zheng, Y. Hong, and Z. Wang. 2017. “Sensitivity analysis on the microwave heating of coal: A coupled electromagnetic and heat transfer model.” Appl. Therm. Eng. 126 (6): 949–962. https://doi.org/10.1016/j.applthermaleng.2017.08.012.
Liu, Q. T., E. Schlangen, Á. García, S. Fan, and M. D. Ven. 2010. “Induction heating of electrically conductive porous asphalt concrete.” Constr. Build. Mater. 24 (7): 1207–1213. https://doi.org/10.1016/j.conbuildmat.2009.12.019.
Liu, X., C. Wang, Y. Deng, and F. Cao. 2016. “Computation of fractal dimension on conductive path of conductive asphalt concrete.” Constr. Build. Mater. 115 (2): 699–704. https://doi.org/10.1016/j.conbuildmat.2016.04.051.
Liu, X., Y. Zhao, Z. Wei, and D. Zhang. 2020. “Microwave absorption enhancement of asphalt concrete with mixtures modifier.” Constr. Build. Mater. 254 (Sep): 119209. https://doi.org/10.1016/j.conbuildmat.2020.119209.
Liu, X. M., T. Y. Li, and H. L. Zhang. 2018. “Short-term aging resistance investigations of polymers and polyphosphoric acid modified asphalt binders under RTFOT aging process.” Constr. Build. Mater. 191 (6): 787–794. https://doi.org/10.1016/j.conbuildmat.2018.10.060.
Liu, Y., F. Luo, J. Su, W. Zhou, D. Zhu, and L. Zhou. 2015. “Influence of oxidation on the dielectric and microwave absorption properties of the milled powders.” J. Alloys Compd. 644 (6): 404–410. https://doi.org/10.1016/j.jallcom.2015.05.087.
Mallick, R. B., and A. Veeraragavan. 2010. “Sustainable pavements in India-the time to start is now.” New Build. Mater. Constr. World (NBM&CW) Mag. 16 (3): 128–140.
National Highway Authority. 2017. “Statistical summary of national toll roads in 2017.” [In Chinese.] Accessed July 12, 2018. http://xxgk.mot.gov.cn/jigou/glj/201808/P020180826499995456568.pdf.
National Highway Authority. 2019. “The statistics communique on national toll road.” [In Chinese.] Accessed August 29, 2019. http://xxgk.mot.gov.cn/jigou/glj/201908/t20190829_3243792.html.
Peide, C., S. Wu, H. Xu, and Y. Li. 2019. “Silicone resin polymer used in preventive maintenance of asphalt mixture based on fog seal.” Polymers (Basel) 11 (8): 1814. https://doi.org/10.3390/polym11111814.
Shen, A. Q., M. Y. Yu, T. Liu, and B. Liu. 2018. “Fatigue performance and improvement mechanism of steel slag asphalt mixture.” [In Chinese.] J. Build. Mater. 21 (6): 2.
Tang, Z. M., T. Hong, Y. H. Liao, F. Y. Chen, J. H. Ye, H. C. Zhu, and K. M. Huang. 2018. “Frequency-selected method to improve microwave heating performance.” Appl. Therm. Eng. 131 (25): 642–648. https://doi.org/10.1016/j.applthermaleng.2017.12.008.
Wang, H., Y. Zhang, Y. Zhang, S. Feng, G. Lu, and L. Cao. 2019a. “Laboratory and numerical investigation of microwave heating properties of asphalt mixture.” Materials (Basel) 12 (1): 146. https://doi.org/10.3390/ma12010146.
Wang, L., H. Xiong, S. U. Rehman, Q. Tan, Y. Chen, L. Zhang, J. Yang, F. Wu, M. Zhong, and Z. Zhong. 2019b. “Microwave absorbing property enhancement of FeSiCr nanomaterials by regulating nanoparticle size.” J. Alloys Compd. 803 (5): 631–636. https://doi.org/10.1016/j.jallcom.2019.06.327.
Wang, Y. J., Y. Sun, Y. Zong, L. X. Zhang, Y. Y. Lan, H. N. Xing, X. H. Li, and X. L. Zheng. 2019c. “Microwave absorption enhancement of nickel cobalt phosphides by decorating on reduced graphene oxide.” J. Solid State Chem. 277 (8): 201–208. https://doi.org/10.1016/j.jssc.2019.06.019.
Wang, Z., Q. Dai, and S. Guo. 2018. “Microwave-healing performance of modified bitumen composites with flake graphite and exfoliated graphite nanoplatelet.” Constr. Build. Mater. 187 (9): 865–875. https://doi.org/10.1016/j.conbuildmat.2018.06.210.
Wang, Z., Z. He, Z. Wang, and M. Ning. 2019d. “Microwave deicing of functional pavement using sintered magnetically separated fly ash as microwave-heating aggregate.” J. Mater. Civ. Eng. 31 (7): 04019127. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002771.
Wyman, D. A., and C. M. Koretsky. 2018. “Effects of road salt deicers on an urban groundwater-fed kettle lake.” Appl. Geochem. 89 (3): 265–272. https://doi.org/10.1016/j.apgeochem.2017.12.023.
Yang, M., W. Zhou, Y. Liu, L. Li, F. Luo, and D. Zhu. 2019. “ with high dielectric and microwave absorption performance in X-band.” Ceram. Int. 45 (14): 17800–17805. https://doi.org/10.1016/j.ceramint.2019.05.351.
Zhang, N., Y. Huang, and M. Wang. 2018. “3D ferromagnetic graphene nanocomposites with ZnO nanorods and nanoparticles co-decorated for efficient electromagnetic wave absorption.” Composites, Part B 136 (6): 135–142. https://doi.org/10.1016/j.compositesb.2017.10.029.
Zhang, Y., Y. Hu, H. Zeng, L. Zhong, K. W. Liu, H. M. Cao, W. Li, and H. J. Yan. 2017. “Silicon carbide recovered from photovoltaic industry waste as photocatalysts for hydrogen production.” J. Hazard. Mater. 329 (8): 22–29. https://doi.org/10.1016/j.jhazmat.2017.01.023.
Zhao, Y. G. 2017. Research of fabrication and thermal conductivity of silicon carbide ceramic. London: Harbin Institute of Technology.
Zhu, H., H. Yuan, Y. Liu, S. Fan, and Y. Ding. 2020. “Evaluation of self-healing performance of asphalt concrete for macrocracks via microwave heating.” J. Mater. Civ. Eng. 32 (9): 04020248. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003332.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Oct 9, 2020
Accepted: Mar 24, 2021
Published online: Sep 11, 2021
Published in print: Nov 1, 2021
Discussion open until: Feb 11, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.