Coupled Thermo–Hydro–Mechanical Characteristics of Compacted GMZ Bentonite: Parameters Identification and Validation
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 11
Abstract
Compacted Gaomiaozi (GMZ) bentonite has been considered as the first choice of buffer materials in the deep geological disposal of high-level radioactive wastes (HLW) in China. During the long-term lifespan of the repository, the bentonite barriers will simultaneously undergo a coupled thermohydromechanical (T-H-M) process, which induces complex volume changes. In this study, the constitutive model of GMZ bentonite with consideration of THM coupling was established, using the framework of the BExM model along with a thermal volume change model for unsaturated soils. New formulations for the interaction between micro and macrostructures ( and ) and the thermal loading yield surface (TY curve) were adopted. Emphasis was placed on the identification and validation of the material parameters based on a series of experimental results. A comparison between the simulated and measured values show that the improved model with parameters calibrated successfully represents the main features of volume changes observed in the laboratory and during wetting-drying cycles, elastic thermal expansion, and plastic thermal contraction under various suctions and stresses, as well as compressibility under various suctions and temperatures.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors are grateful to the National Natural Science Foundation of China (41807237 and 42002289), Shanghai Natural Science Foundation (18ZR1440500), National Key R&D Program of China (2017YFE0119500 and 2019YFC1509900), and the Fundamental Research Funds for the Central Universities (22120200187) for their financial support.
References
Abuel-Naga, H. M., D. T. Bergado, L. Grino, P. Rujivipat, and Y. Thet. 2006. “Experimental evaluation of engineering behavior of soft Bangkok clay under elevated temperature.” J. Geotech. Geoenviron. Eng. 132 (7): 902–910. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:7(902).
Alonso, E. E., E. Romero, C. Hoffemann, and E. García-Escudero. 2005. “Expansive bentonite/sand mixtures in cyclic controlled suction drying and wetting.” Eng. Geol. 81 (3): 213–226. https://doi.org/10.1016/j.enggeo.2005.06.009.
Alonso, E. E., J. Vaunat, and A. Gens. 1999. “Modelling the mechanical behaviour of expansive clays.” Eng. Geol. 54 (1–2): 173–183. https://doi.org/10.1016/S0013-7952(99)00079-4.
Bag, R. 2011. “Coupled thermo-hydro-mechanical-chemical behaviour of MX80 bentonite in geotechnical applications.” Ph.D. thesis, Cardiff School of Engineering, Cardiff Univ.
Birkholzer, J. T., A. E. Bond, J. A. Hudson, L. R. Jing, C. F. Tsang, H. Shao, and O. Kolditz. 2018. “DECOVALEX-2015: An international collaboration for advancing the understanding and modeling of coupled thermo-hydro-mechanical-chemical (THMC) processes in geological systems.” Environ. Earth Sci. 77 (14): 539. https://doi.org/10.1007/s12665-018-7697-7.
Chen, Y. F., C. B. Zhou, and L. Jing. 2009. “Modelling coupled THM process of geological porous media; theory and validation against laboratory and field scale experiments.” Comput. Geotech. 36 (8): 1308–1329. https://doi.org/10.1016/j.compgeo.2009.06.001.
Cho, W. J., J. O. Lee, and S. Kwon. 2010. “Analysis of thermo-hydro-mechanical process in the engineered barrier system of a high-level waste repository.” Nucl. Eng. Des. 240 (6): 1688–1698. https://doi.org/10.1016/j.nucengdes.2010.02.027.
Cleall, P. J., T. A. Melhuish, and H. R. Thomas. 2006. “Modelling the three-dimensional behaviour of a prototype nuclear waste repository.” Eng. Geol. 85 (1–2): 212–220. https://doi.org/10.1016/j.enggeo.2005.09.045.
Cui, Y. J., N. Sultan, and P. Delage. 2000. “A thermo-mechanical model for saturated clays.” Can. Geotech. J. 37 (3): 607–620. https://doi.org/10.1139/t99-111.
Cui, Y. J., M. Yahia-Aissa, and P. Delage. 2002. “A model for the volume change behaviour of heavily compacted swelling clays.” Eng. Geol. 64 (2–3): 233–250. https://doi.org/10.1016/S0013-7952(01)00113-2.
Dupray, F., B. Francois, and L. Laloui. 2013. “Analysis of the FEBEX multi-barrier system including thermoplasticity of unsaturated bentonite.” Int. J. Numer. Anal. Methods Geomech. 37 (4): 399–422. https://doi.org/10.1002/nag.1103.
Gawin, D., P. Baggio, and B. A. Schrefler. 1995. “Coupled heat, water and gas flow in deformable porous media.” Int. J. Numer. Methods Fluids 20 (8–9): 969–987. https://doi.org/10.1002/fld.1650200817.
Gens, A., and E. E. Alonso. 1992. “A framework for the behaviour of unsaturated expansive clays.” Can. Geotech. J. 29 (6): 1013–1032. https://doi.org/10.1139/t92-120.
Gens, A., A. J. Garcia-Molina, S. Olivella, E. E. Alonso, and F. Huertas. 1998. “Analysis of a full scale in situ test simulating repository conditions.” Int. J. Numer. Anal. Methods Geomech. 22 (7): 515–548. https://doi.org/10.1002/(SICI)1096-9853(199807)22:7%3C515::AID-NAG926%3E3.0.CO;2-8.
Gens, A., M. Sánchez, L. Guimarães, N. Do, E. E. Alonso, A. Lloret, S. Olivella, M. V. Villar, and F. Huertas. 2009. “A full-scale in situ heating test for high-level nuclear waste disposal: Observations, analysis and interpretation.” Géotechnique 59 (4): 377–399. https://doi.org/10.1680/geot.2009.59.4.377.
Gens, A. A., and S. Olivella. 2006. “Coupled thermo-hydro-mechanical analysis of engineered barriers for high-level radioactive waste.” Chin. J. Rock Mech. Eng. 25 (4): 670–680.
Hökmark, H., A. Ledesma, T. Lassabatère, B. Fälth, L. Börgesson, J. C. Robinet, N. Sellali, and P. Sémété. 2007. “Modelling heat and moisture transport in the ANDRA/SKB temperature buffer test.” Phys. Chem. Earth 32 (8–14): 753–766. https://doi.org/10.1016/j.pce.2006.04.024.
Hueckel, T., and G. Baldi. 1990. “Thermoplasticity of saturated clays: Experimental constitutive study.” J. Geotech. Eng. 116 (12): 1778–1796. https://doi.org/10.1061/(ASCE)0733-9410(1990)116:12(1778).
Kanno, T., T. Fujita, S. Takeuchi, H. Ishikawa, K. Hara, and M. Nakano. 1999. “Coupled thermo-hydro-mechanical modeling of bentonite buffer material.” Int. J. Numer. Anal. Methods Geomech. 23 (12): 1281–1307. https://doi.org/10.1002/(SICI)1096-9853(199910)23:12%3C1281::AID-NAG32%3E3.0.CO;2-I.
Kröhn, K.-P. 2004. “Results and interpretation of bentonite resaturation experiments with liquid water and water vapour.” In Unsaturated Soils: Experimental Studies—Proc., Int. Conf. “From Experimental Evidence towards Numerical Modelling of Unsaturated Soils, edited by T. Schanz. Weimar, Germany. New York: Springer.
Kwon, S., and C. Lee. 2019. “Thermal-hydraulic-mechanical coupling analysis using FLAC3D-TOUGH2 for an in situ heater test at Horonobe underground research laboratory.” Geosyst. Eng. 22 (5): 289–298. https://doi.org/10.1080/12269328.2019.1638315.
Laloui, L., and C. Cekerevac. 2003. “Thermo-plasticity of clays: An isotropic yield mechanism.” Comput. Geotech. 30 (8): 649–660. https://doi.org/10.1016/j.compgeo.2003.09.001.
Liu, X. Y., C. Y. Zhang, and Q. S. Liu. 2008. “Coupled THM model and simulation of the Yucca Mountain and FEBEX case study within DECOVALEX-THMC framework.” Adv. Mater. Res. 33–37: 639–644. https://doi.org/10.4028/www.scientific.net/AMR.33-37.639.
Lloret, A., and M. V. Villar. 2007. “Advances on the knowledge of the thermo-hydromechanical behaviour of heavily compacted ‘FEBEX’ bentonite.” Phys. Chem. Earth A/B/C 32 (8–14): 701–715. https://doi.org/10.1016/j.pce.2006.03.002.
Lloret, A., M. V. Villar, M. Sanchez, A. Gens, X. Pintado, and E. E. Alonso. 2003. “Mechanical behaviour of heavily compacted bentonite under high suction changes.” Géotechnique 53 (1): 27–40. https://doi.org/10.1680/geot.2003.53.1.27.
Manepally, C., S. Stothoff, G. Ofoegbu, B. Dasgupta, and R. Fedors. 2015. “Modeling thermohydrological-mechnical behavior of granular bentonite.” In Proc., 15th Int. High-Level Radioactive Waste Management Conf. La Grange Park, IL: American Nuclear Society.
Nguyen, T. S., Z. Li, B. Garitte, and J. D. Barnichon. 2019. “Modelling a heater experiment for radioactive waste disposal.” Environ. Geotech. 6 (2): 87–100. https://doi.org/10.1680/jenge.15.00060.
Nguyen, T. S., A. P. S. Selvadurai, and G. Armand. 2005. “Modelling the FEBEX THM experiment using a state surface approach.” Int. J. Rock Mech. Min. Sci. 42 (5–6): 639–651. https://doi.org/10.1016/j.ijrmms.2005.03.005.
Noorishad, J., C. F. Tsang, and P. A. Witherspoon. 1984. “Coupled thermal–hydraulic–mechanical phenomena in saturated fractured porous rocks: Numerical approach.” J. Geophys. Res. 89 (12): 10365–10373. https://doi.org/10.1029/JB089iB12p10365.
Nowamooz, H., and F. Masrouri. 2010. “Mechanical behaviour of expansive soils after several drying and wetting cycles.” Geomech. Geoeng. 5 (4): 213–221. https://doi.org/10.1080/17486025.2010.521588.
Olivella, S., J. Carrera, A. Gens, and E. E. Alonso. 1994. “Non-isothermal multiphase flow of brine and gas through saline media.” Transp. Porous Media 15 (3): 271–293. https://doi.org/10.1007/BF00613282.
Robinet, J. C., A. Rahbaoui, F. Plas, and P. Lebon. 1996. “A constitutive thermomechanical model for saturated clays.” Eng. Geol. 41 (1–4): 145–169. https://doi.org/10.1016/0013-7952(95)00049-6.
Rodriguez-Dono, A., S. Olivella, and N. Mokni. 2020. “Assessment of a high-level spent nuclear fuel disposal model.” Environ. Geotech. 7 (1): 42–58. https://doi.org/10.1680/jenge.18.00017.
Romero, E., M. V. Villar, and A. Lloret. 2005. “Thermo-hydro-mechanical behaviour of heavily overconsolidated clays.” Eng. Geol. 81 (3): 255–268. https://doi.org/10.1016/j.enggeo.2005.06.011.
Rutqvist, J., D. Barr, J. T. Birkholzer, M. Chijimatsu, O. Kolditz, Q. Liu, Y. Oda, W. Wang, and C. Zhang. 2008. “Results from an international simulation study on coupled thermal, hydrological, and mechanical processes near geological nuclear waste repositories.” Nucl. Technol. 163 (1): 101–109. https://doi.org/10.13182/NT08-A3974.
Samper, J., L. Zheng, L. Montenegro, A. M. Fernández, and P. Rivas. 2008. “Coupled thermohydro-chemical models of compacted bentonite after FEBEX in situ test.” Appl. Geochem. 23 (5): 1186–1201. https://doi.org/10.1016/j.apgeochem.2007.11.010.
Sánchez, M., A. Gens, L. Guimarães, and S. Olivella. 2005. “A double structure generalized plasticity model for expansive materials.” Int. J. Numer. Anal. Methods Geomech. 29 (8): 751–787. https://doi.org/10.1002/nag.434.
Schäfers, A., et al. 2020. “Increasing understanding and confidence in THM simulations of engineered barrier systems.” Environ. Geotech. 7 (1): 59–71. https://doi.org/10.1680/jenge.18.00078.
Sugita, Y., M. Chijimatsu, A. Ito, H. Kurikaml, and Y. Ohnishi. 2004. “THM simulation of the full-scale in-situ engineered barrier system experiment in Grimsel test site in Switzerland.” In Vol. 2 of Elsevier geo-engineering book series, 119–124. Amsterdam, Netherlands: Elsevier. https://doi.org/10.1016/S1571-9960(04)80028-4.
Tang, A. M., and Y. J. Cui. 2009. “Modelling the thermomechanical volume change behaviour of compacted expansive clays.” Géotechnique 59 (3): 185–195. https://doi.org/10.1680/geot.2009.59.3.185.
Tang, A. M., Y. J. Cui, and N. Barnel. 2008. “Thermo-mechanical behaviour of a compacted swelling clay.” Géotechnique 58 (1): 45–54. https://doi.org/10.1680/geot.2008.58.1.45.
Thomas, H. R., and M. R. Sansom. 1995. “Fully coupled analysis of heat, moisture and air transfer in unsaturated soil.” J. Eng. Mech. 121 (3): 392–405. https://doi.org/10.1061/(ASCE)0733-9399(1995)121:3(392).
Wang, X. R. 2016. “Numerical analysis of thermo-hydro-mechanical (THM) processes in the clay based material.” M.Sc. thesis, Dept. of Environmental Informatics, Technische Universität Dresden.
Wang, Y., W. M. Ye, B. Chen, Y. G. Chen, and Y. J. Cui. 2019. “Thermal–mechanical effects on volume-change behavior of compacted GMZ bentonite during cyclic wetting–drying processes.” Environ. Earth Sci. 78 (17): 539. https://doi.org/10.1007/s12665-019-8551-2.
Wigeland, R. A., T. H. Bauer, T. H. Fanning, and E. E. Morris. 2006. “Separation and transmutation criteria to improve utilization of a geologic repository.” Nucl. Technol. 154 (1): 95–106. https://doi.org/10.13182/NT06-3.
Yan, R. T., and Q. Zhang. 2019. “A constitutive model of expansive clay considering thermo-hydro-mechanical coupling effect.” Environ. Earth Sci. 78 (9). https://doi.org/10.1007/s12665-019-8275-3.
Ye, W. M., Y. G. Chen, B. Chen, Q. Wang, and J. Wang. 2010. “Advances on the knowledge of the buffer/backfill properties of heavily-compacted GMZ bentonite.” Eng. Geol. 116 (1–2): 12–20. https://doi.org/10.1016/j.enggeo.2010.06.002.
Ye, W. M., Y. Wang, Q. Wang, Y. G. Chen, and B. Chen. 2020. “Stress-dependent temperature effect on the swelling behavior of compacted GMZ bentonite.” Bull. Eng. Geol. Environ. 79 (7): 3897–3907. https://doi.org/10.1007/s10064-020-01801-2.
Ye, W. M., Y. W. Zhang, B. Chen, Z. J. Zheng, Y. G. Chen, and Y. J. Cui. 2012. “Investigation on compression behaviour of highly compacted GMZ01 bentonite with suction and temperature control.” Nucl. Eng. Des. 252 (Nov): 11–18. https://doi.org/10.1016/j.nucengdes.2012.06.037.
Ye, W. M., Y. W. Zhang, Y. G. Chen, B. Chen, and Y. J. Cui. 2013. “Experimental study on the thermal volumetric behaviour of highly compacted GMZ01 bentonite.” Appl. Clay Sci. 83–84 (Oct): 210–216. https://doi.org/10.1016/j.clay.2013.09.001.
Zhao, J. B., L. Chen, F. Colli, Y. M. Liu, and J. Wang. 2016. “Numerical modeling of coupled thermal-hydro-mechanical behavior of GMZ bentonite in the China-mock-up test.” Eng. Geol. 214 (Nov): 116–126. https://doi.org/10.1016/j.enggeo.2016.09.015.
Zheng, L. G., J. Rutqvist, H. Xu, and J. T. Birkholzer. 2017. “Coupled THMC models for bentonite in an argillite repository for nuclear waste: Illitization and its effect on swelling stress under high temperature.” Eng. Geol. 230 (Nov): 118–129. https://doi.org/10.1016/j.enggeo.2017.10.002.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Sep 12, 2020
Accepted: Mar 10, 2021
Published online: Aug 30, 2021
Published in print: Nov 1, 2021
Discussion open until: Jan 30, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Jiangfeng Liu, Hongyang Ni, Jianfu Shao, Xiaozhao Li, Yi Hong, Gas permeability evolution of unsaturated GMZ bentonite under thermo-mechanical effects, Engineering Geology, 10.1016/j.enggeo.2022.106966, 313, (106966), (2023).
- Hongyang Ni, Jiangfeng Liu, Andrey P. Jivkov, Wanqing Shen, Jianfu Shao, A dual-porosity model for analysis of temperature effects on hydro-mechanical behaviour of GMZ bentonite under unconfined conditions, Computers and Geotechnics, 10.1016/j.compgeo.2022.105127, 154, (105127), (2023).
- Hongyang Ni, Jiangfeng Liu, Kundwa Marie Judith, Zhipeng Wang, Kang Yang, Xianbiao Mao, Pore structure evolution of unsaturated GMZ bentonite under thermo-hydro effects through ESEM fixed-point observation, Acta Geotechnica, 10.1007/s11440-023-01824-5, (2023).