Improving the Hardened Properties of Nonautoclaved Silicate Materials Using Nanodispersed Mine Waste
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 9
Abstract
The development trend of building materials science directs at on energy and resource conservation, as well as the creation of green composites. An important step in this direction is the disposal of waste of various origins, including mine waste. This study is aimed to improve the hardened properties of nonautoclaved silicate materials using nanodispersed mine waste for the use of the structural formation of wall silicate products. Binder composites obtained from sand-clay rocks of an incomplete stage of clay formation were prepared in the form of new compositions, using a modified calcareous-sandy-clay binder, based on which silicate products with improved strength properties and durability characteristics were developed. Using differential thermal analysis (DTA) and X-ray diffraction patterns, as well as scanning electron microscopy images, the synthesis of hydration products in the system sandy clay rocks–calcium hydroxide–water without a traditional autoclave treatment was also studied. The features of hydration phase formation and hardening of modified binders were investigated taking into account the chemical, structural, and morphological features of sandy-clay rocks. Meanwhile, the microstructural, morphological, and thermal properties of the silicate materials at 2-day were also determined, and their work investigated their compressive strength and water absorption. The results show that the polymineral composition of the studied sandy-argillaceous rocks, which are nanodispersed mine waste, determines the possibility of interaction with quicklime with the formation of binders during hydrothermal treatment without pressure. Accordingly, it contributes to the production of low energy consumption silicate wall materials. Cementitious composites of unautoclaved silicate materials based on sandy clay rocks have hydraulic properties that are caused by the process of further formation and recrystallization of calcium hydrosilicates, which optimizes the ratio between gel and crystalline components and compacts the structure of the cementitious composites, which leads to an increase in performance. The use of sand-clay rocks instead of traditional quartz sand in the production of silicate materials improves the process of forming the raw mix, increases the strength of silicate products by 4–11 times, and optimizes the weather resistance of wall materials.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The work was realized in the framework of the grant Russian Science Foundation (project No. 19-79-00185).
References
Abu-Jdayil, A.-H., W. Hittini, M. Hassan, and S. Hameedi. 2019. “Traditional, state-of-the-art and renewable thermal building insulation materials: An overview.” Constr. Build. Mater. 214 (Jul): 709–735. https://doi.org/10.1016/j.conbuildmat.2019.04.102.
Adesina, A., and S. Das. 2020. “Durability evaluation of green-engineered cementitious composite incorporating glass as aggregate.” J. Mater. Civ. Eng. 32 (12): 04020354. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003444.
Arabi, N., and R. Jauberthie. 2012. “Calcium silicate materials: Substitution of hydrated lime by ground granulated blast furnace slag in autoclaving conditions.” J. Mater. Civ. Eng. 24 (9): 1230–1236. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000480.
Casini, M. 2020. “Sustainability of advanced materials in construction, encyclopedia of renewable and sustainable.” Materials 4: 221–231.
Chakrabarti, S., and J. Kodikara. 2005. “Stabilization of crushed basaltic rocks and clay mixtures using cementitious additives.” J. Mater. Civ. Eng. 17 (4): 432–439. https://doi.org/10.1061/(ASCE)0899-1561(2005)17:4(432).
Consoli, N. C., A. M. L. Caicedo, R. B. Saldanha, and H. C. S. Filho. 2020. “Eggshell produced limes: Innovative materials for soil stabilization.” J. Mater. Civ. Eng. 32 (11): 06020018. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003418.
Delage, P., and D. Tessier. 2020. “Macroscopic effects of nano and microscopic phenomena in clayey soils and clay rocks.” Geomech. Energy Environ. 2020 (Jan): 100177. https://doi.org/10.1016/j.gete.2019.100177.
Fediuk, R. 2018. “Reducing permeability of fiber concrete using composite binders. Int. J. 9 (1): 5–6.
Fediuk, R., A. Pak, and D. Kuzmin. 2017. “Fine-grained concrete of composite binder.” Mater. Sci. Eng. 262 (1): 012025. https://doi.org/10.1088/1757-899X/262/1/012025.
Fediuk, R., A. Smoliakov, and N. Stoyushko. 2016. “Increase in composite binder activity.” Mater. Sci. Eng. 156: 012042.
Fediuk, R., R. Timokhin, A. Mochalov, K. Otsokov, and I. Lashina. 2019. “Performance properties of high-density impermeable cementitious paste.” J. Mater. Civ. Eng. 31 (4): 04019013. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002633.
Fediuk, R. S., V. S. Lesovik, A. P. Svintsov, N. A. Gladkova, and R. A. Timokhin. 2018. “Self-compacting concrete using pretreatmented rice husk ash.” Mag. Civ. Eng. 79 (3): 66–76.
Franco de Carvalho, J. M., P. A. Matias Campos, K. Defáveri, G. J. Brigolini, L. G. Pedroti, and R. A. Fiorotti Peixoto. 2019. “Low environmental impact cement produced entirely from industrial and mining waste.” J. Mater. Civ. Eng. 31 (4): 04018391. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002617.
GOST. 2004. Silicate brick and stones. Moscow: GOST.
Grekov, D., G. Montavon, J.-C. Robinet, and B. Grambow. 2019. “Smectite fraction assessment in complex natural clay rocks from interlayer water content determined by thermogravimetric and thermoporometry analysis.” J. Colloid Interface Sci. 555 (Nov): 157–165. https://doi.org/10.1016/j.jcis.2019.07.076.
Ibragimov, R., and R. Fediuk. 2019. “Improving the early strength of concrete: Effect of mechanochemical activation of the cementitious suspension and using of various superplasticizers.” Constr. Build. Mater. 226 (Nov): 839–848. https://doi.org/10.1016/j.conbuildmat.2019.07.313.
Klyuev, S. V., T. A. Khezhev, V. Pukharenko, and A. V. Klyuev. 2018. “Fiber concrete on the basis of composite binder and technogenic raw materials.” Mater. Sci. Forum 931 (1): 603–607. https://doi.org/10.4028/www.scientific.net/MSF.931.603.
Kontorovich, A. E., A. G. Yan, P. A. Zamirailova, E. A. Kostyreva, and V. G. Eder. 2016. “Classification of rocks of the Bazhenov formation.” Russ. Geol. Geophys. 57 (11): 1606–1612. https://doi.org/10.1016/j.rgg.2016.10.006.
Kubis, M., K. Pietrak, L. Cieslikiewicz, P. Furmanski, M. Seredynski, T. S. Wisniewski, and P. Łapka. 2020. “On the anisotropy of thermal conductivity in ceramic bricks.” J. Build. Eng. 31 (Sep): 101418. https://doi.org/10.1016/j.jobe.2020.101418.
Li, J., W. Zhang, and P. J. Monteiro. 2020. “The structure and intrinsic mechanical properties of nanocrystalline calcium silicate hydrate.” ACS Sustainable Chem. Eng. 8 (33): 12453–12461. https://doi.org/10.1021/acssuschemeng.0c03230.
Loganina, V. I., P. Skachkov, and A. D. Ryzhov. 2018. “Additive based on aluminosilicates for lime dry mortar mixes.” Mater. Sci. Eng. 441 (1): 012028. https://doi.org/10.1088/1757-899X/441/1/012028.
Lukuttsova, N. P., E. G. Karpikov, and S. N. Golovin. 2018. “Highly-dispersed wollastonite-based additive and its effect on fine concrete strength.” Solid State Phenomena 284: 1005–1011.
Miranda, L. F. R., M. P. Lapenda, S. H. C. Teixeira, and V. Vogt. 2014. “Rational procedure for composition of screed mortar with recycled sand at a construction site.” J. Mater. Civ. Eng. 26 (5): 855–862. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000877.
Nicolas, M. F., M. Vlasova, P. A. Márquez Aguilar, M. Kakazey, M. M. Chávez Cano, R. A. Matus, and T. P. Puig. 2020. “Development of an energy-saving technology for sintering of bricks from high-siliceous clay by the plastic molding method.” Constr. Build. Mater. 242 (May): 118142. https://doi.org/10.1016/j.conbuildmat.2020.118142.
Osman, D. A. M., O. Nur, and M. A. Mustafa. 2020. “Reduction of energy consumption in cement industry using zinc oxide nanoparticles.” J. Mater. Civ. Eng. 32 (6): 04020124. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003196.
Pérez-Urrestarazu, L., R. Fernández-Cañero, P. Campos-Navarro, C. Sousa-Ortega, and G. Egea. 2019. “Assessment of perlite, expanded clay and pumice as substrates for living walls.” Sci. Hortic. 254 (Aug): 48–54. https://doi.org/10.1016/j.scienta.2019.04.078.
Schuur, H. M. L. 2000. “Calcium silicate products with crushed building and demolition waste.” J. Mater. Civ. Eng. 12 (4): 282–287. https://doi.org/10.1061/(ASCE)0899-1561(2000)12:4(282).
Shang, J., M. Flury, J. B. Harsh, and R. L. Zollars. 2010. “Contact angles of aluminosilicate clays as affected by relative humidity and exchangeable cations.” Colloids Surf. 353 (1): 1–9. https://doi.org/10.1016/j.colsurfa.2009.10.013.
Tarasova, G. I. 2018. “The development of compositions of silicate-based paints thermalizing conveyor-washing sediment—Waste of the sugar industry.” Constr. Mater. Prod. 1 (1): 21–31.
Vakalova, T. V., A. A. Reshetova, I. B. Revva, P. G. Rusinov, and D. I. Balamygin. 2019. “Effect of thermochemical activation of clay raw materials on phase formation, microstructure and properties of aluminosilicate proppants.” Appl. Clay Sci. 183 (Dec): 105335. https://doi.org/10.1016/j.clay.2019.105335.
Villasmil, W., L. J. Fischer, and J. Worlitschek. 2019. “A review and evaluation of thermal insulation materials and methods for thermal energy storage systems.” Renewable Sustainable Energy Rev. 103 (Apr): 71–84. https://doi.org/10.1016/j.rser.2018.12.040.
Volodchenko, A. A., V. S. Lesovik, L. H. Zagorodnjuk, and A. N. Volodchenko. 2015. “Influence of the inorganic modifier structure on structural composite properties.” Int. J. Appl. Eng. Res. 10 (19): 40617–40622.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jun 12, 2020
Accepted: Jan 12, 2021
Published online: Jun 16, 2021
Published in print: Sep 1, 2021
Discussion open until: Nov 16, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Dhiraj Agrawal, Uday Waghe, Khalid Ansari, Rajendra Dighade, Mugahed Amran, Diyar N. Qader, Roman Fediuk, Experimental effect of pre-treatment of rubber fibers on mechanical properties of rubberized concrete, Journal of Materials Research and Technology, 10.1016/j.jmrt.2023.01.027, 23, (791-807), (2023).
- Aamar Danish, Mohammad Ali Mosaberpanah, Togay Ozbakkaloglu, Muhammad Usama Salim, Kiran Khurshid, Muhammed Bayram, Mugahed Amran, Roman Fediuk, Diyar N. Qader, A compendious review on the influence of e-waste aggregates on the properties of concrete, Case Studies in Construction Materials, 10.1016/j.cscm.2022.e01740, 18, (e01740), (2023).
- Muhd Afiq Hizami Abdullah, Raizal Saifulnaz Muhammad Rashid, Mugahed Amran, Farzad Hejazii, N. M. Azreen, Roman Fediuk, Yen Lei Voo, Nikolai Ivanovich Vatin, Mohd Idzat Idris, Recent Trends in Advanced Radiation Shielding Concrete for Construction of Facilities: Materials and Properties, Polymers, 10.3390/polym14142830, 14, 14, (2830), (2022).
- Ahmed Anees Alani, Ruslan Lesovik, Valery Lesovik, Roman Fediuk, Sergey Klyuev, Mugahed Amran, Mujahid Ali, Afonso R. G. de Azevedo, Nikolai Ivanovich Vatin, Demolition Waste Potential for Completely Cement-Free Binders, Materials, 10.3390/ma15176018, 15, 17, (6018), (2022).
- Ramaiah Prakash, Nagarajan Divyah, Sundaresan Srividhya, Siva Avudaiappan, Mugahed Amran, Sudharshan Naidu Raman, Pablo Guindos, Nikolai Ivanovich Vatin, Roman Fediuk, Effect of Steel Fiber on the Strength and Flexural Characteristics of Coconut Shell Concrete Partially Blended with Fly Ash, Materials, 10.3390/ma15124272, 15, 12, (4272), (2022).
- Veerabadrasamy Arularasi, Thamilselvi Pachiappan, Siva Avudaiappan, Sudharshan Naidu Raman, Pablo Guindos, Mugahed Amran, Roman Fediuk, Nikolai Ivanovich Vatin, Effects of Admixtures on Energy Consumption in the Process of Ready-Mixed Concrete Mixing, Materials, 10.3390/ma15124143, 15, 12, (4143), (2022).
- Gunasekaran Murali, Sallal Rashid Abid, Mugahed Amran, Nikolai Ivanovich Vatin, Roman Fediuk, Drop Weight Impact Test on Prepacked Aggregate Fibrous Concrete—An Experimental Study, Materials, 10.3390/ma15093096, 15, 9, (3096), (2022).
- Wei Quan Chin, Yeong Huei Lee, Mugahed Amran, Roman Fediuk, Nikolai Vatin, Ahmad Beng Hong Kueh, Yee Yong Lee, A Sustainable Reuse of Agro-Industrial Wastes into Green Cement Bricks, Materials, 10.3390/ma15051713, 15, 5, (1713), (2022).
- Abdulmajeed Alhokabi, Muzamir Hasan, Mugahed Amran, Roman Fediuk, Nikolai Ivanovich Vatin, Honin Alshaeer, The Effect of POFA-Gypsum Binary Mixture Replacement on the Performance of Mechanical and Microstructural Properties Enhancements of Clays, Materials, 10.3390/ma15041532, 15, 4, (1532), (2022).
- Vijay Antony Raj Bernard, Senthil Muthalvan Renuka, Siva Avudaiappan, Chockkalingam Umarani, Mugahed Amran, Pablo Guindos, Roman Fediuk, Nikolai Ivanovich Vatin, Performance Investigation of the Incorporation of Ground Granulated Blast Furnace Slag with Fly Ash in Autoclaved Aerated Concrete, Crystals, 10.3390/cryst12081024, 12, 8, (1024), (2022).
- See more