Weathering Mechanisms in Bitumen Modified with Polyphosphoric Acid
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 7
Abstract
This study examines the effect of weathering on bituminous composites containing polyphosphoric acid (PPA). PPA has been commonly used in bitumen to increase bitumen’s stiffness and elastic properties. However, the effect of PPA on bitumen’s properties is highly affected by the interplay between PPA and other bitumen modifiers such as liquid and solid additives. Wax-based additives generally reduce PPA’s efficacy, and a mineral additive such as montmorillonite (MMT) clay increases PPA’s efficacy. MMT has been typically used to enhance the resistance of a bituminous matrix to aging. This paper uses laboratory experiments to evaluate changes in the properties of bitumen containing PPA and MMT when exposed to water. Samples were conditioned in water at 60°C for up to 100 h, and their thermomechanical properties were evaluated at different intervals. The study results showed that the presence of PPA in bitumen alleviates the swelling of MMT when montmorillonite-doped bitumen is exposed to water. However, extended water exposure reduces the elastic properties of bitumen. This is attributed to PPA’s losing its branches as water promotes the separation of PPA’s branches from its backbone, leading to a reduction in binding energy between bitumen and PPA. The latter was reflected in a rapid loss of bitumen’s elasticity, healing capacity, and shear thinning, as water conditioning continued.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This research was sponsored by the National Science Foundation (Award Nos. 1935723 and 1928795). The authors acknowledge their consultation with Dr. Rajib Mallick at Worcester Polytechnic Institute. The authors greatly appreciate Jeff Long and Peter Goguen with Arizona State University for their assistance and guidance with the laboratory experiments.
References
Ali, S., R. Ghabchi, M. Zaman, R. Steger, S. Rani, and M. Rahman. 2018. “Mechanistic evaluation of effect of PPA on moisture-induced damage using SFE and XRF.” In Proc., Int. Conf. on Transportation and Development 2018: Airfield and Highway Pavements. Reston, VA: ASCE. https://ascelibrary.org/doi/abs/10.1061/9780784481554.042.
Ali, S. A., R. Ghabchi, S. Rani, and M. Zaman. 2020. “Characterization of effect of aging on polymer-and polyphosphoric acid-modified asphalt binders using X-ray diffraction (XRD).” J. Test. Eval. 48 (6): 4190–4203. https://doi.org/10.1520/JTE20180141.
Ameli, A., R. Babagoli, M. Khabooshani, R. AliAsgari, and F. Jalali. 2020. “Permanent deformation performance of binders and stone mastic asphalt mixtures modified by SBS/montmorillonite nanocomposite.” Constr. Build. Mater. 239: 117700. https://doi.org/10.1016/j.conbuildmat.2019.117700.
Arnold, T. S., S. P. Needham, and J. Youtcheff. 2008. “The use of phosphoric acid as a modifier for hot mix asphalt.” In Transportation research circular E-C160, polyphosphoric acid modification of asphalt binders. Washington, DC: Federal Highway Administration.
ASTM. 2015a. Standard test method for determining the rheological properties of asphalt binder using a dynamic shear rheometer. ASTMD7175-15. West Conshohocken, PA: ASTM.
ASTM. 2015b. Standard test method for multiple stress creep and recovery (MSCR) of asphalt binder using a dynamic shear rheometer. ASTMD7405-15. West Conshohocken, PA: ASTM.
Filippi, S., M. Cappello, M. Merce, and G. Polacco. 2018. “Effect of nanoadditives on bitumen aging resistance: A critical review.” J. Nanomater. 2018 (1): 17. https://doi.org/10.1155/2018/2469307.
Fini, E. H., A. M. Hung, and A. Roy. 2019. “Active mineral fillers arrest migrations of Alkane acids to the interface of Bitumen and siliceous surfaces.” ACS Sustainable Chem. Eng. 7 (12): 10340–10348. https://doi.org/10.1021/acssuschemeng.9b00352.
Fini, E. H., A. Samieadel, and A. Rajib. 2020. “Moisture damage and its relation to surface adsorption/desorption of rejuvenators.” Ind. Eng. Chem. Res. 59 (30): 13414–13419. https://doi.org/10.1021/acs.iecr.0c02534.
Ge, D., K. Yan, L. You, and Z. Wang. 2017. “Modification mechanism of asphalt modified with Sasobit and Polyphosphoric acid (PPA).” Constr. Build. Mater. 143: 419–428. https://doi.org/10.1016/j.conbuildmat.2017.03.043.
Giavarini, C., D. Mastrofini, M. Scarsella, L. Barré, and D. Espinat. 2000. “Macrostructure and rheological properties of chemically modified residues and bitumens.” Energy Fuels 14 (2): 495–502. https://doi.org/10.1021/ef9902045.
Hossain, Z., M. S. Alam, and G. Baumgardner. 2020. “Evaluation of rheological performance and moisture susceptibility of polyphosphoric acid modified asphalt binders.” Road Mater. Pavement Des. 21 (1): 237–252. https://doi.org/10.1080/14680629.2018.1483261.
Hosseinnezhad, S., T. Hawkins, A. Hines, and E. Fini. 2017. Application of biomodified montmorillonite clay to enhance asphalt oxidation resistance. Washington, DC: Transportation Research Board.
Hung, A. M., A. Goodwin, and E. H. Fini. 2017. “Effects of water exposure on bitumen surface microstructure” Constr. Build. Mater. 135: 682. https://doi.org/10.1016/j.conbuildmat.2017.01.002.
Hung, A. M., F. Pahlavan, S. Shakiba, S. L. Chang, S. M. Louie, and E. H. Fini. 2019. “Preventing assembly and crystallization of alkane acids at the silica–bitumen interface to enhance interfacial resistance to moisture damage.” Ind. Eng. Chem. Res. 58 (47): 21542–21552. https://doi.org/10.1021/acs.iecr.9b04890.
Liu, H., M. Zhang, Y. Wang, Z. Chen, and P. Hao. 2020a. “Rheological properties and modification mechanism of polyphosphoric acid-modified asphalt.” Road Mater. Pavement Des. 21 (4): 1078–1095. https://doi.org/10.1080/14680629.2018.1537931.
Liu, J., K. Yan, L. You, D. Ge, and Z. Wang. 2016. “Laboratory performance of warm mix asphalt binder containing polyphosphoric acid.” Constr. Build. Mater. 106 (Mar): 218–227. https://doi.org/10.1016/j.conbuildmat.2015.12.126.
Liu, S., S. Zhou, and A. Peng. 2020b. “Evaluation of polyphosphoric acid on the performance of polymer modified asphalt binders.” J. Appl. Polym. Sci. 137 (34): 48984. https://doi.org/10.1002/app.48984.
Mannan, U. A., M. Ahmad, and R. A. Tarefder. 2017. “Influence of moisture conditioning on healing of asphalt binders.” Constr. Build. Mater. 146 (Aug): 360–369. https://doi.org/10.1016/j.conbuildmat.2017.04.087.
Mousavi, M., and E. H. Fini. 2019. “Moderating effects of paraffin wax on interactions between polyphosphoric acid and bitumen constituents.” ACS Sustainable Chem. Eng. 7 (24): 19739–19749. https://doi.org/10.1021/acssuschemeng.9b05008.
Mousavi, M., E. H. Fini, and A. M. Hung. 2019. “Underlying molecular interactions between sodium montmorillonite clay and acidic bitumen.” J. Phys. Chem. C 123 (25): 15513–15522. https://doi.org/10.1021/acs.jpcc.9b01960.
Mousavi, M., D. Oldham, and E. H. Fini. 2020. “Using fundamental material properties to predict the moisture susceptibility of asphalt binder: Polarizability and a moisture-induced shear-thinning index.” ACS Appl. Bio Mater. 3 (11): 7399–7407. https://doi.org/10.1021/acsabm.0c00374.
Obando, C., D. Oldham, K. Kaloush, and E. Fini. 2020. “Effect of composition of water on accelerating moisture damage in pavement.” In Proc., Transportation Research Board. Washington, DC: Transportation Research Board.
Oldham, D. 2020. Implications of bio-modification on moisture damage mechanisms in asphalt binder matrix. Phoenix: Arizona State Univ.
Oldham, D., R. B. Mallick, and E. Fini. 2020a. “Reducing susceptibility to moisture damage in asphalt pavements using polyethylene terephthalate and sodium montmorillonite clay.” Constr. Build. Mater. 269 (Feb): 121302.
Oldham, D., X. Q. Qu, H. Wang, and E. H. Fini. 2020b. “Investigating change of polydispersity and rheology of crude oil and bitumen due to asphaltene oxidation.” Energy Fuels 34 (8): 10299–10305. https://doi.org/10.1021/acs.energyfuels.0c01344.
Pahlavan, F., S. Hosseinnezhad, A. Samieadel, A. Hung, and E. Fini. 2019. “Fused aromatics to restore molecular packing of aged bituminous materials.” Ind. Eng. Chem. Res. 58 (27): 11939–11953. https://doi.org/10.1021/acs.iecr.9b01397.
Rajib, A. I., F. Pahlavan, and E. H. Fini. 2020. “Investigating molecular-level factors that affect the durability of restored aged asphalt binder.” J. Cleaner Prod. 270 (Oct): 122501. https://doi.org/10.1016/j.jclepro.2020.122501.
Ren, Z., Y. Zhu, Q. Wu, M. Zhu, F. Guo, H. Yu, and J. Yu. 2020. “Enhanced storage stability of different polymer modified asphalt binders through nano-montmorillonite modification.” Nanomaterials (Basel) 10 (4): 641. https://doi.org/10.3390/nano10040641.
Samieadel, A., and E. H. Fini. 2020. “Interplay between wax and polyphosphoric acid and its effect on bitumen thermomechanical properties.” Constr. Build. Mater. 243 (May): 118194. https://doi.org/10.1016/j.conbuildmat.2020.118194.
Schmets, A., N. Kringos, T. Pauli, P. Redelius, and T. Scarpas. 2010. “On the existence of wax-induced phase separation in bitumen.” Int. J. Pavement Eng. 11 (6): 555–563. https://doi.org/10.1080/10298436.2010.488730.
Socrates, G. 2004. Infrared and Raman characteristic group frequencies: Tables and charts. New York: Wiley.
You, Z., J. Mills-Beale, J. M. Foley, S. Roy, G. M. Odegard, Q. Dai, and S. W. Goh. 2011. “Nanoclay-modified asphalt materials: Preparation and characterization.” Constr. Build. Mater. 25 (2): 1072–1078. https://doi.org/10.1016/j.conbuildmat.2010.06.070.
Yu, J., X. Zeng, S. Wu, L. Wang, and G. Liu. 2007. “Preparation and properties of montmorillonite modified asphalts.” Mater. Sci. Eng., A 447 (1–2): 233–238. https://doi.org/10.1016/j.msea.2006.10.037.
Zhang, Z., P. Cheng, and Y. Li. 2020. “Effect of nano montmorillonite on the multiple self-healing of microcracks in asphalt mixture.” Road Mater. Pavement Des. 1–15. https://doi.org/10.1080/14680629.2020.1793805.
Zhang, Z., M. Jia, W. Jiao, B. Qi, and H. Liu. 2018. “Physical properties and microstructures of organic rectorites and their modified asphalts.” Constr. Build. Mater. 171: 33–43. https://doi.org/10.1016/j.conbuildmat.2018.01.163.
Zhang, Z. P., Y. Wen, J. Z. Pei, and S. F. Chen. 2011. “Modification of asphalt by montmorillonite.” In Vol. 84 of Proc., Applied Mechanics and Materials, 662–666. Zurich, Switzerland: Trans Tech Publications.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Aug 18, 2020
Accepted: Dec 10, 2020
Published online: Apr 29, 2021
Published in print: Jul 1, 2021
Discussion open until: Sep 29, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Xiaomei Zhong, Pu Li, Xiaoyu Lin, Zeyuan Zhao, Quan (Sophia) He, Haibo Niu, Jie Yang, Diluted Bitumen: Physicochemical Properties, Weathering Processes, Emergency Response, and Recovery, Frontiers in Environmental Science, 10.3389/fenvs.2022.910365, 10, (2022).