Enhancing Burnability Characteristics of Low-Temperature Burnt-Cement Clinker by Recycling Phosphogypsum Wastes
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 9
Abstract
In the present study, the effect of phosphogypsum, a byproduct from the phosphoric acid production industry, on the clinkerization process was researched in order to improve the burnability of clinkers at lower burning temperatures. Raw meal samples containing phosphogypsum at 0%, 1%, 3%, and 5% by weight were burned at 1,350°C, 1,400°C, 1,450°C, and 1,500°C. The introduction of phosphogypsum reduced the presence of unbounded (free) CaO relatively up to 43%. Thus, the mineralization effect of phosphogypsum promotes lower burning temperatures. The free CaO content of the 5% phosphogypsum containing clinker decreased to 0.94% at 1,400°C after of burning time. The free CaO content was found to be almost identical (0.75%) to that of industrial clinker burned in a rotary kiln at 1,500°C. Due to the low free CaO content () and the burnability index (73), the recycling of phosphogypsum wastes was found to be suitable for the production of eco-efficient clinkers. The reduced energy consumption and energy-related emissions in such modified clinkers can contribute to the economic and ecological goals of the cement industry.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The authors would like to thank BATIÇİM Batı Anadolu Cement Industry for allowing the execution of this experimental study in their R&D laboratories.
References
Altun, I. A. 1999. “Influence of heating rate on the burning of cement clinker.” Cem. Concr. Res. 29 (4): 599–602. https://doi.org/10.1016/S0008-8846(98)00196-3.
Andrew, R. M. 2018. “Global emissions from cement production, 1928–2017.” Earth Syst. Sci. Data 10 (4): 2213–2239. https://doi.org/10.5194/essd-10-2213-2018.
Aranda Usón, A., A. M. López-Sabirón, G. Ferreira, and E. Llera Sastresa. 2013. “Uses of alternative fuels and raw materials in the cement industry as sustainable waste management options.” Renewable Sustainable Energy Rev. 23 (Jul): 242–260. https://doi.org/10.1016/j.rser.2013.02.024.
Asamany, E. A., M. D. Gibson, and M. J. Pegg. 2017. “Evaluating the potential of waste plastics as fuel in cement kilns using bench-scale emissions analysis.” Fuel 193 (Apr): 178–186. https://doi.org/10.1016/j.fuel.2016.12.054.
Bouregba, A., A. Diouri, B. Elghattas, A. Boukhari, and T. Guedira. 2018. “Influence of fluorine on clinker burnability and mechanical properties of CPA Moroccan cement.” In Vol. 149 of Proc., MATEC Web Conf., 01075. Les Ulis, France: EDP Sciences. https://doi.org/10.1051/matecconf/201814901075.
Campos, M. P., L. J. P. Costa, M. B. Nisti, and B. P. Mazzilli. 2017. “Phosphogypsum recycling in the building materials industry: Assessment of the radon exhalation rate.” J. Environ. Radioact. 172 (Jun): 232–236. https://doi.org/10.1016/j.jenvrad.2017.04.002.
CEN (European Committee for Standardization). 2011. Cement. Part 1: Composition, specifications and conformity criteria for common cements. EN 197-1. Brussels, Belgium: CEN.
Chatterjee, A. K. 2018. Cement production technology: Principles and practice. Boca Raton, FL: CRC Press.
Damtoft, J. S., J. Lukasik, D. Herfort, D. Sorrentino, and E. M. Gartner. 2008. “Sustainable development and climate change initiatives.” Cem. Concr. Res. 38 (2): 115–127. https://doi.org/10.1016/j.cemconres.2007.09.008.
Değermenci, N. 2008. “Utilization of phosphogypsum as raw and calcined material in manufacturing of building products.” Constr. Build. Mater. 22 (8): 1857–1862. https://doi.org/10.1016/j.conbuildmat.2007.04.024.
ECRA (European Cement Research Academy). 2017. “Development of state of the art-techniques in cement manufacturing: Trying to lookahead (CSI/ECRA-technology papers).” Accessed April 8, 2021. https://www.wbcsd.org/Sector-Projects/Cement-Sustainability-Initiative/Resources/Development-of-State-of-the-Art-Techniques-in-Cement-Manufacturing.
Garcia-Lodeiro, I., S. Donatello, A. Fernández-Jiménez, and Á. Palomo. 2016. “Hydration of hybrid alkaline cement containing a very large proportion of fly ash: A descriptive model.” Materials (Basel) 9 (7): 605. https://doi.org/10.3390/ma9070605.
Gökçe, H. S., M. Tuyan, K. Ramyar, and M. L. Nehdi. 2020. “Development of eco-efficient fly ash–based alkali-activated and geopolymer composites with reduced alkaline activator dosage.” J. Mater. Civ. Eng. 32 (2): 04019350. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003017.
Hewlett, P. C. 2003. Lea’s chemistry of cement and concrete. 3rd ed. Oxford, UK: Butterworth-Heinemann.
Hills, L. M., V. Johansen, and F. M. Miller. 2003. “Solving raw material challenges (cement industry).” In Proc., IEEE-IAS/PCS 2002 Cement Industry Technical Conf., 139–150. Jacksonville, FL. New York: IEEE. https://doi.org/10.1109/citcon.2002.1006501.
IPCC (Intergovernmental Panel on Climate Change). 2006. IPCC guidelines for national greenhouse gas inventories, edited by S. Eggleston, L. Buendia, K. Miwa, T. Ngara, and K. Tanabe. Geneva: IPCC, Institute for Global Environmental Strategies.
Justnes, H., and E. C. Nygaard. 1995. “Technical calcium nitrate as set accelerator for cement at low temperatures.” Cem. Concr. Res. 25 (8): 1766–1774. https://doi.org/10.1016/0008-8846(95)00172-7.
Kacimi, L., A. Simon-Masseron, A. Ghomari, and Z. Derriche. 2006. “Reduction of clinkerization temperature by using phosphogypsum.” J. Hazard. Mater. 137 (1): 129–137. https://doi.org/10.1016/j.jhazmat.2005.12.053.
Kacimi, L., A. Simon-Masseron, S. Salem, A. Ghomari, and Z. Derriche. 2009. “Synthesis of belite cement clinker of high hydraulic reactivity.” Cem. Concr. Res. 39 (7): 559–565. https://doi.org/10.1016/j.cemconres.2009.02.004.
Kaddatz, K. T., M. G. Rasul, and A. Rahman. 2013. “Alternative fuels for use in cement kilns: Process impact modeling.” Procedia Eng. 56: 413–420. https://doi.org/10.1016/j.proeng.2013.03.141.
Kara, M., Y. Kilic, and T. Erenoglu. 2017. “An experimental study on construction and demolition waste usage as secondary raw material for cement production.” World J. Innovative Res. 2 (4): 1–7.
Kurdowski, W. 2014. Cement and concrete chemistry. Dordrecht, Netherlands: Springer.
Lawrence, C. D. 2003. “The production of low-energy cements.” In Lea’s chemistry of cement and concrete, edited by P. C. Hewlett. 4th ed., 421–470. Amsterdam, Netherlands: Elsevier. https://doi.org/10.1016/B978-075066256-7/50021-7.
Le Quéré, C., et al. 2018. “Global carbon budget 2017.” Earth Syst. Sci. Data 10 (1): 405–448. https://doi.org/10.5194/essd-10-405-2018.
Luukkonen, T., Z. Abdollahnejad, J. Yliniemi, P. Kinnunen, and M. Illikainen. 2018a. “Comparison of alkali and silica sources in one-part alkali-activated blast furnace slag mortar.” J. Cleaner Prod. 187 (Jun): 171–179. https://doi.org/10.1016/j.jclepro.2018.03.202.
Luukkonen, T., Z. Abdollahnejad, J. Yliniemi, P. Kinnunen, and M. Illikainen. 2018b. “One-part alkali-activated materials: A review.” Cem. Concr. Res. 103 (Jan): 21–34. https://doi.org/10.1016/j.cemconres.2017.10.001.
Mastali, M., Z. Abdollahnejad, and F. Pacheco-Torgal. 2018a. “Carbon dioxide sequestration of fly ash alkaline-based mortars containing recycled aggregates and reinforced by hemp fibres.” Constr. Build. Mater. 160 (Jan): 48–56. https://doi.org/10.1016/j.conbuildmat.2017.11.044.
Mastali, M., Z. Abdollahnejad, and F. Pacheco-Torgal. 2018b. “Performance of waste based alkaline mortars submitted to accelerated carbon dioxide curing.” Resour. Conserv. Recycl. 129 (Feb): 12–19. https://doi.org/10.1016/j.resconrec.2017.10.017.
Mathew, B., S. Erikandath, G. Lele, and S. Khadilkar. 2016. “Process control & clinker quality monitoring through mineralogical and micro-structural indices.” In Proc., 14th NCB Int. Seminar on Cement and Building Materials. New Delhi, India: National Council for Cement and Building Materials.
Mikulčić, H., M. Vujanović, and N. Duić. 2013. “Reducing the emissions in Croatian cement industry.” Appl. Energy 101 (Jan): 41–48. https://doi.org/10.1016/j.apenergy.2012.02.083.
Pardo, N., J. A. Moya, and A. Mercier. 2011. “Prospective on the energy efficiency and emissions in the EU cement industry.” Energy 36 (5): 3244–3254. https://doi.org/10.1016/j.energy.2011.03.016.
Provis, J. L. 2018. “Alkali-activated materials.” Cem. Concr. Res. 114 (Dec): 40–48. https://doi.org/10.1016/j.cemconres.2017.02.009.
Provis, J. L., A. Palomo, and C. Shi. 2015. “Advances in understanding alkali-activated materials.” Cem. Concr. Res. 78 (Dec): 110–125. https://doi.org/10.1016/j.cemconres.2015.04.013.
Rahman, A., M. G. Rasul, M. M. K. Khan, and S. C. Sharma. 2017. “Assessment of energy performance and emission control using alternative fuels in cement industry through a process model.” Energies 10 (12): 1996. https://doi.org/10.3390/en10121996.
Raina, K., and L. K. Janakiraman. 1998. “Use of mineralizer in black meal process for improved clinkerization and conservation of energy.” Cem. Concr. Res. 28 (8): 1093–1099. https://doi.org/10.1016/S0008-8846(98)00082-9.
Sengupta, P. 2020. Refractories for the cement industry. Cham, Switzerland: Springer.
Silva, N. C., E. A. N. Fernandes, M. Cipriani, and M. H. T. Taddei. 2001. “The natural radioactivity of Brazilian phosphogypsum.” J. Radioanal. Nucl. Chem. 249 (1): 251–255. https://doi.org/10.1023/a:1013215215484.
Strigáč, J. 2015. “Effect of selected alternative fuels and raw materials on the cement clinker quality.” Sel. Sci. Pap.-J. Civ. Eng. 10 (2): 81–92. https://doi.org/10.2478/sspjce-2015-0020.
Taylor, M., C. Tam, and D. Gielen. 2006. “Energy efficiency and CO2 emissions from the global cement industry.” In Proc., IEA-WBCSD Workshop: Energy Efficiency and CO2 Emission Reduction Potentials and Policies in the Cement Industry. Paris: International Energy Agency.
Tobón, J. I., M. F. Díaz-Burbano, and O. J. Restrepo-Baena. 2016. “Optimal fluorite/gypsum mineralizer ratio in Portland cement clinkering.” Mater. Constr. 66 (322): e086. https://doi.org/10.3989/mc.2016.05515.
Tran, T. T. 2011. “Fluoride mineralization of Portland cement: Applications of double-resonance NMR spectroscopy in structural investigations of guest ions in cement phases.” Ph.D. thesis, Dept. of Chemistry, Faculty of Science and Technology, Aarhus Univ.
Worrell, E., L. Price, N. Martin, C. Hendriks, and L. O. Meida. 2001. “Carbon dioxide emissions from the global cement industry.” Annu. Rev. Energy Environ. 26 (1): 303–329. https://doi.org/10.1146/annurev.energy.26.1.303.
Yamashita, M., and H. Tanaka. 2011. “Low-temperature burnt portland cement clinker using mineralizer.” Cem. Sci. Concr. Technol. 65 (1): 82–87. https://doi.org/10.14250/cement.65.82.
Zur Strassen, H. 1957. “Der theoretische warmebedarf des zement brandes.” Zem. Kalk Gips 10 (1): 1–12.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Mar 19, 2020
Accepted: Dec 3, 2020
Published online: Jul 14, 2021
Published in print: Sep 1, 2021
Discussion open until: Dec 14, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.