Application of Gilsonite-Modified Slag as a Subballast Layer with Recommendations for Optimum Content of Gilsonite
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Materials in Civil Engineering
Volume 33, Issue 4
Abstract
Steel slag accumulation is one of the major issues for steel manufacturing companies, because it occupies a large portion of a company’s yard. Investigators have suggested various applications for using slag in other industries. There is great potential for using slag as an aggregate in road and railway construction. Evidence demonstrates the compatibility of slag for road base and subbase construction. However, the use of slag as a subballast for railway construction has not been investigated thoroughly. This research studied the application of slag to subballast railway construction. A railway subballast layer requires a high shear strength, which is greater than slag’s shear strength. Therefore, the authors modified the slag with 1%, 2%, and 3% gilsonite, or natural binder, and performed Los Angeles abrasion, direct shear, and California bearing ratio tests on the modified slag. The results of all experiments indicated significant improvement in the modified slag’s shear strength properties, which makes gilsonite-modified slag a potential replacement for traditional subballast material.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data and models generated or used in this study appear in the published article.
References
Ahmedzade, P., and B. Sengoz. 2009. “Evaluation of steel slag coarse aggregate in hot mix asphalt concrete.” J. Hazard. Mater. 165 (1–3): 300–305. https://doi.org/10.1016/j.jhazmat.2008.09.105.
Aiban, S. A. 2005. “Utilization of steel slag aggregate for road bases.” J. Test. Eval. 34 (1): 65–75. https://doi.org/10.1520/JTE12683.
Ameri, M., D. Mirzaiyan, and A. Amini. 2018. “Rutting resistance and fatigue behavior of gilsonite-modified asphalt binders.” J. Mater. Civ. Eng. 30 (11): 04018292. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002468.
Amuchi, M., S. M. Abtahi, B. Koosha, S. M. Hejazi, and H. Sheikhzeinoddin. 2015. “Reinforcement of steel-slag asphalt concrete using polypropylene fibers.” J. Ind. Text. 44 (4): 526–541. https://doi.org/10.1177/1528083713502998.
Asi, I. M., H. Y. Qasrawi, and F. I. Shalabi. 2007. “Use of steel slag aggregate in asphalt concrete mixes.” Can. J. Civ. Eng. 34 (8): 902–911. https://doi.org/10.1139/l07-025.
ASTM. 2016. Standard test method for crazing resistance of fired glazed white wares by autoclave treatment. ASTM C424. West Conshohocken, PA: ASTM.
ASTM. 2017. Standard test method for sound absorption and sound absorption coefficients by the reverberation room method. ASTM C423. West Conshohocken, PA: ASTM.
ASTM. 2020. Standard test method for resistance to degradation of small size coarse aggregate by abrasion and impact in the Los Angeles machine. ASTM C131. West Conshohocken, PA: ASTM.
Chamling, P. K., S. Haldar, and S. Patra. 2020. “Physico-chemical and mechanical characterization of steel slag as railway ballast.” Indian Geotech. J. 50: 267–275. https://doi.org/10.1007/s40098-020-00421-7.
Delgado, B. G., A. V. da Fonseca, E. Fortunato, and P. Maia. 2019. “Mechanical behavior of inert steel slag ballast for heavy haul rail track: Laboratory evaluation.” Transp. Geotech. 20 (Sep): 100243. https://doi.org/10.1016/j.trgeo.2019.100243.
Dhoble, Y. N., and S. Ahmed. 2018. “Review on the innovative uses of steel slag for waste minimization.” J. Mater. Cycles Waste Manage. 20 (3): 1373–1382. https://doi.org/10.1007/s10163-018-0711-z.
Esmaeili, M., R. Nouri, and K. Yousefian. 2017. “Experimental comparison of the lateral resistance of tracks with steel slag ballast and limestone ballast materials.” Proc. Inst. Mech. Eng., Part F: J. Rail Rapid Transit 231 (2): 175–184. https://doi.org/10.1177/0954409715623577.
Esmaeili, M., K. Yousefian, and R. Nouri. 2019. “Vertical load distribution in ballasted railway tracks with steel slag and limestone ballasts.” Int. J. Pavement Eng. 20 (9): 1065–1072. https://doi.org/10.1080/10298436.2017.1380808.
Esveld, C. 2001. Vol. 385 of Modern railway track. Zaltbommel, Netherlands: MRT-Productions.
Euro Slag 2016. “Slag producers and processors.” Accessed November 1, 2020. https://www.euroslag.com/products/statistics/statistics-2016/.
Farrand, B., and J. Emery. 1995. “Recent improvements in quality of steel slag aggregate.” Transp. Res. Rec. 1468: 137–141.
Hunt, L., and G. E. Boyle. 2000. Steel slag in hot mix asphalt concrete (No. OR-RD-00-09). Salem, OR: Oregon DOT.
Indraratna, B., Y. Qi, and A. Heitor. 2018. “Evaluating the properties of mixtures of steel furnace slag, coal wash, and rubber crumbs used as subballast.” J. Mater. Civ. Eng. 30 (1): 04017251. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002108.
Jahanian, H. R., G. H. Shafabakhsh, and H. Divandari. 2017. “Performance evaluation of Hot Mix Asphalt (HMA) containing bitumen modified with Gilsonite.” Constr. Build. Mater. 131 (Jan): 156–164. https://doi.org/10.1016/j.conbuildmat.2016.11.069.
Jing, G., J. Wang, H. Wang, and M. Siahkouhi. 2020. “Numerical investigation of the behavior of stone ballast mixed by steel slag in ballasted railway track.” Constr. Build. Mater. 262 (Nov): 120015. https://doi.org/10.1016/j.conbuildmat.2020.120015.
Koh, T., S. W. Moon, H. Jung, Y. Jeong, and S. Pyo. 2018. “A feasibility study on the application of basic oxygen furnace (BOF) steel slag for railway ballast material.” Sustainability 10 (2): 284. https://doi.org/10.3390/su10020284.
Li, Q., H. Ding, A. Rahman, and D. He. 2016. “Evaluation of basic oxygen furnace (BOF) material into slag-based asphalt concrete to be used in railway substructure.” Constr. Build. Mater. 115 (Jul): 593–601. https://doi.org/10.1016/j.conbuildmat.2016.04.085.
Lv, Q., W. Huang, H. Sadek, F. Xiao, and C. Yan. 2019. “Investigation of the rutting performance of various modified asphalt mixtures using the Hamburg Wheel-Tracking Device test and Multiple Stress Creep Recovery test.” Constr. Build. Mater. 206 (May): 62–70. https://doi.org/10.1016/j.conbuildmat.2019.02.015.
Maslehuddin, M., A. M. Sharif, M. Shameem, M. Ibrahim, and M. S. Barry. 2003. “Comparison of properties of steel slag and crushed limestone aggregate concretes.” Constr. Build. Mater. 17 (2): 105–112. https://doi.org/10.1016/S0950-0618(02)00095-8.
Morata, M., C. Saborido, and V. Fontserè. 2016. “Slag aggregates for railway track bed layers: Monitoring and maintenance.” Comput. Railways XV: Railway Eng. Des. Oper. 162: 283–294. https://doi.org/10.2495/CR160261.
Motz, H., and J. Geiseler. 2001. “Products of steel slags an opportunity to save natural resources.” Waste Manage. 21 (3): 285–293. https://doi.org/10.1016/S0956-053X(00)00102-1.
Navikas, D., M. Bulevičius, and H. Sivilevičius. 2016. “Determination and evaluation of railway aggregate subballast gradation and other properties variation.” J. Civ. Eng. Manage. 22 (5): 699–710. https://doi.org/10.3846/13923730.2016.1177586.
Pasetto, M., and N. Baldo. 2010. “Experimental evaluation of high performance base course and road base asphalt concrete with electric arc furnace steel slags.” J. Hazard. Mater. 181 (1–3): 938–948. https://doi.org/10.1016/j.jhazmat.2010.05.104.
Qasrawi, H. 2014. “The use of steel slag aggregates to enhance the mechanical properties of recycled aggregate concrete and retain the environment.” Constr. Build. Mater. 54 (Mar): 298–304. https://doi.org/10.1016/j.conbuildmat.2013.12.063.
Qi, Y., and B. Indraratna. 2020. “Energy-based approach to assess the performance of a granular matrix consisting of recycled rubber, steel-furnace slag, and coal wash.” J. Mater. Civ. Eng. 32 (7): 04020169. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003239.
Qi, Y., B. Indraratna, A. Heitor, and J. S. Vinod. 2018a. “Effect of rubber crumbs on the cyclic behavior of steel furnace slag and coal wash mixtures.” J. Geotech. Geoenviron. Eng. 144 (2): 04017107. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001827.
Qi, Y., B. Indraratna, and J. S. Vinod. 2018b. “Behavior of steel furnace slag, coal wash, and rubber crumb mixtures with special relevance to stress–dilatancy relation.” J. Mater. Civ. Eng. 30 (11): 04018276. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002459.
Quintana, H. A. R., J. A. H. Noguera, and C. F. U. Bonells. 2016. “Behavior of gilsonite-modified hot mix asphalt by wet and dry processes.” J. Mater. Civ. Eng. 28 (2): 04015114. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001339.
Rondón-Quintana, H., C. Zafra-Mejía, and S. Chaves-Pabón. 2019. “Performance characteristics and mechanical resistance of a hot mix asphalt using gilsonite and blast furnace slag.” Przegląd Naukowy. Inżynieria i Kształtowanie Środowiska 28 (4): 503–515.
Rose, J., and H. Lees. 2008. “Long-term assessment of asphalt trackbed component materials’ properties and performance.” In Proc., American Railway Engineering and Maintenance of Way Annual Conf., Lanham, MD: American Railway Engineering and Maintenance-of-Way Association.
Shi, C. 2004. “Steel slag—Its production, processing, characteristics, and cementitious properties.” J. Mater. Civ. Eng. 16 (3): 230–236. https://doi.org/10.1061/(ASCE)0899-1561(2004)16:3(230).
Signes, C. H., P. M. Fernández, E. M. Perallón, and R. I. Franco. 2015. “Characterisation of an unbound granular mixture with waste tyre rubber for subballast layers.” Mater. Struct. 48 (12): 3847–3861. https://doi.org/10.1617/s11527-014-0443-z.
Sobhi, S., A. Yousefi, and A. Behnood. 2020. “The effects of Gilsonite and Sasobit on the mechanical properties and durability of asphalt mixtures.” Constr. Build. Mater. 238 (Mar): 117676. https://doi.org/10.1016/j.conbuildmat.2019.117676.
Tasalloti, S. M., B. Indraratna, C. Rujikiatkamjorn, A. Heitor, and G. Chiaro. 2015. “A laboratory study on the shear behavior of mixtures of coal wash and steel furnace slag as potential structural fill.” Geotech. Test. J. 38 (4): 361–372. https://doi.org/10.1520/GTJ20140047.
Thomas, M. D., and P. B. Bamforth. 1999. “Modelling chloride diffusion in concrete: Effect of fly ash and slag.” Cem. Concr. Res. 29 (4): 487–495. https://doi.org/10.1016/S0008-8846(98)00192-6.
Trani, L. D. 2009. Application of constriction size based filtration criteria for railway subballast under cyclic conditions. Wollongong, NSW, Australia: Univ. of Wollongong.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Mar 12, 2020
Accepted: Sep 14, 2020
Published online: Feb 1, 2021
Published in print: Apr 1, 2021
Discussion open until: Jul 1, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.